New product

In stock

Moyenne des votes pour ce produit
5.0 / 5
Moyenne : 5.0 / 5
Basée sur 2 avis clients.

308,25 € tax excl.

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.


More info

Replica of the new 098 series of designated marksman rifles, these carabines are produced in different specification that includes civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger, the charging handle, and the front and rear sight are made in aluminum, that made the replica is more realistic. Each model has on the lower receiver a unique serial number.

The rifle in the new E-EDITION configuration has a velocity of around 450 fps and a faster trigger response. This was achieved due to the new gearbox parts with increased durability, such as:

  •  reinforced V2 long gearbox frame with quick spring change system
  •  processor unit with built-in MOSFET system
  •  full steel teeth polycarbonate piston
  •  CNC machined steel gear set
  •  8mm ball bearings
  •  CNC machined aluminum silent cylinder and piston head set (ball bearing piston head, double o-ring cylinder head)
  •  ball bearing spring guide
  • hi-torque motor

Specifications :

  •  16" external barrel
  •  precision 6.03mm inner barrel
  •  14.5" aluminum M-LOK handguard
  •  aluminum 7.62 upper receiver
  •  aluminum 7.62 lower receiver
  •  polymer 6-position crane stock for large capacity batteries
  •  polymer pistol grip
  •  folding sight set
  •  ambidextrous safety selector lever
  •  polymer magazine
  •  dummy flash suppressor with a 14mm thread CCW
  •  ambidextrous sling mount plate

Set include :

  • · AR-10 replica
  • · 500rd magazine

Data sheet

Caliber6mm Airsoft
Length980/1070 mm
Main colorBlack
StyleCrane Stock
Thread type14mm CCW
Firing modeSemi + Full automatic
Attachment SystemM-LOK
Power sourceElectric
Outer Barrel lenght20 inch
Inner barrel (mm)500
Inner Barrel dia (mm)6.03
Gearbox inserts8mm Bearings
Gear ratio18:1 Torque
Quick change spring GearboxYes
Integrated MosfetYes Factory built in
Trigger SystemElectronic
Motor versionLong Axis
Magazine VersionHi-cap
Magazine capacity500
BatteryNot Included
Battery chargerNot Included
Battery ConnectorDEAN (T-Plug)
Power (FPS @ 0.20gr)450



Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

Questions  (3)

A partir de Sebastien | 2022-08-03 09:52:29

Bonjour à tous
Est ce que la tête de cylindre est une tête standard V2 ?

Merci à vous


Bonjour , oui c'est une tête classique V2.


A partir de Sebastien | 2022-07-29 21:54:47

Un hop UP maxx est il compatible avec ?


Bonjour , oui il est compatible avec les versions pour M4 AEG .


A partir de Damien | 2021-05-17 06:59:37

Bonjour l'équipe P6,
Je voulais savoir si vous connaissiez la longueur du nozzle d'origine s'il vous plaît ?
Bonne journée ! Cordialement Michel Damien.


Bonjour , il fait d'origine 24,25 mm

Cordialement ,

Page: 1
Seuls les utilisateurs enregistrés peuvent poser une question. Login