> >>>P6 ARCTURUS PP-19 Vityaz custom AEG
P6 ARCTURUS PP-19 Vityaz custom AEG - View larger

P6 ARCTURUS PP-19 Vityaz custom AEG

P6-AEG-AT-PP19-1

New product

Build time 3 - 6 days

Moyenne des votes pour ce produit
0 / 5
Moyenne : 0 / 5
Basée sur 0 avis clients.

Configure

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • ARCTURUS PP-19 Vityaz

    The AT-PP19-1-ME is the first replica of a submachine gun of Arcturus. The main elements such as receiver, receiver cover, receiver cover latch, safety lever, trigger, trigger guard, magazine latch, bolt carrier, folding stock, folding stock latch, gas tube, gas port block, front sight base, folding rear sight, and flash hider, as in the case of firearms were made of steel. Smaller parts, including the outer barrel, were made of aluminum and light alloys. The whole rifle is well fitted and protected against corrosion. Pistol grip, magazine, handguard are made of reinforced polymer.

    • New reinforced gearbox compatible with Marui parts and ETU by GATE and PERUN.
    • Quick spring change system
    • bearing spring guide
    • bearing piston head
    • full steel teeth polycarbonate piston,
    • steel gears mounted on 8mm steel bushings
    • Electric trigger "micro-switch"
    • MOSFET for faster trigger response and prevent burnout of contacts.
    • Sealed nozzle
    • AK rotary hop-up chamber
    • 6.01mm precision barrel.
    • 24k high-performance neodymium motor with MIM steel pinion gear.
    • Unique serial number.

    The kit includes:

    • PP-19 Vityaz replica
    • magwell
    • 30/95rds EMM variable-capacity magazine
    ARCTURUS PP-19 Vityaz

Choose your output power, value in FPS with 0.20gr BBs. Please note : FPS may vary, we cannot garantee exact FPS asked, it will be a range. For low power configuration please note that the cylinder can be modified.

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • 270 FPS

    270 FPS

  • 280 FPS

    280 FPS

  • 290 FPS

    290 FPS

  • 300 FPS

    300 FPS

  • 310 FPS

    310 FPS

  • 320 FPS

    320 FPS

  • 330 FPS

    330 FPS

  • 340 FPS

    340 FPS

  • 350 FPS

    350 FPS

  • 360 FPS

    360 FPS

  • 370 FPS

    370 FPS

  • 380 FPS

    380 FPS

  • 390 FPS

    390 FPS

  • 400 FPS

    400 FPS

  • 410 FPS

    410 FPS

  • 420 FPS

    420 FPS

  • 430 FPS

    430 FPS

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • SAFE - SEMI - AUTO

    SAFE - SEMI - AUTO

  • SAFE - SEMI - BURST3

    SAFE - SEMI - BURST3

  • SAFE - SEMI ONLY

    SAFE - SEMI ONLY

We advice 18:1 or 16:1 ratio wich is very good balance between torque and speed. Please note that for reliability of your replica only 18:1 gearset can be installed with a brushless motor.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • SHS 18:1 torque CNC gearset

    SHS 18:1 torque CNC gearset

  • SHS 16:1 speed CNC gearset

    SHS 16:1 speed CNC gearset

  • SHS 13:1 super high speed CNC gearset

    SHS 13:1 super high speed CNC gearset

  • SHS 12:1 extreme high speed CNC gearset

    Recommanded spring power : M100 or less, (330 FPS max)
    SHS 12:1 extreme high speed CNC gearset

  • BIG DRAGON metal / titanium 18:1 torque gearset

    • A set of extremely durable gears 18:1 dedicated to the V2 and V3 gearbox.
    • They were made of an alloy of steel and titanium, thanks to which their strength is increased.
    • The final machining of the gears was carried out on CNC machine tools, guaranteeing the precision of workmanship.
    • They are perfect for springs not stronger than 130 m/s.
    BIG DRAGON metal / titanium 18:1 torque gearset

  • BIG DRAGON metal / titanium 16:1 speed gearset

    • A set of extremely durable gears speed 16:1 dedicated to the V2 and V3 gearbox.
    • They were made of an alloy of steel and titanium, thanks to which their strength is increased.
    • The final machining of the gears was carried out on CNC machine tools, guaranteeing the precision of workmanship.
    • They are perfect for springs not stronger than 120 m/s.
    BIG DRAGON metal / titanium 16:1 speed gearset

  • BIG DRAGON metal / titanium 13:1 high speed gearset

    • A set of extremely durable gears super high speed 13:1 dedicated to the V2 and V3 gearbox.
    • They were made of an alloy of steel and titanium, thanks to which their strength is increased.
    • The final machining of the gears was carried out on CNC machine tools, guaranteeing the precision of workmanship.
    • They are perfect for springs not stronger than 110 m/s.
    BIG DRAGON metal / titanium 13:1 high speed gearset

  • Arcturus 13:1 Super High Speed CNC GearSet

    A set of steel gears with a 13:1 ratio for AEG. They are manufactured on CNC machines to guarantee solidity and durability. Ideal compatibility with V2 or V3 type gearboxes. By combining these gears with a High Speed type motor, adding an 11.1v lipo battery, this will allow you to reach a rate of fire of around 25-28rps.

    Arcturus 13:1 Super High Speed CNC GearSet

Choose your mosfet

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • GATE ASTER V3 Basic SE LITE

    The extensive ASTER V3 SE system, for Airsoft guns equipped with a V2 type gearbox. It is the latest generation of SE, an advanced mosfet using optical sensors. It completely eliminates the contact switch from the gearbox, replacing it with a modern, programmable controller. This mosfet can also work with Airsoft guns after tuning - basic, medium and advanced (EXPERT software version). It is a "drop-in" mosfet supplied with wiring and all components needed for assembly. A significant advantage is the possibility of programming via the trigger, via USB-Link / Blue-Link as well as the app!


    It has many features such as :

    • SAFE - SEMI - BINARY selector settings
    • Pre-coating LOW / MID / HIGH
    • Battery protection
    • Active brake
    • Advanced settings
    • Adjustable trigger sensitivity

    100090.jpg?time=1684915017512

    GATE ASTER V3 Basic SE LITE

  • GATE ASTER V3 Basic SE BOX

    The extensive ASTER V2 SE system, for Airsoft gunsequipped witha V3 type gearbox. It is the latest generation of SE, an advanced mosfet using optical sensors. It completely eliminates the contact switch from the gearbox, replacing it with a modern, programmable controller. This mosfet can also work with Airsoft guns after tuning - basic, medium and advanced (EXPERT software version) It is a "drop-in" mosfet supplied with wiring and all components needed for assembly. A significant advantage is the possibility of programming via the trigger, via USB-Link / Blue-Link as well as the app!


    It has many features such as:

    • SAFE - SEMI - BINARY selector settings
    • Pre-coating LOW / MID / HIGH
    • Battery protection
    • Active brake
    • Advanced settings
    • Adjustable trigger sensitivity

    100093.jpg?time=1684915553277

    GATE ASTER V3 Basic SE BOX

  • Perun V3 HYBRID mosfet

    Perun V3 Hybrid replaces mechanical contacts in your airsoft replica or gel blaster and provides lots of useful features. Optical and magnetic sensors allow to eliminate many moving parts that are prone to damage, thus increasing the reliability. Adaptive trigger control allows switching from a very short trigger travel to a long one even in the field, with almost any trigger, including stock ones. Works without the need for any modification with most V3 gearboxes in Tokyo Marui standard. For details and exceptions please refer to the manual.

    Adjustable trigger sensitivity – The trigger can be set to 5 sensitivity levels, ranging from very short pull needed to fire a shot, to a very long one. No modification to the trigger or the gearbox is needed and the trigger sensitivity change is possible even in the field.

    Independently programmed firing modes - Program the firing modes any way you like, setting safe, semi, burst or auto on both selector positions.

    Active brake - active brake stops the motor after each shot preventing spring compression or in case of replicas with high rate of fire, overspin (double shot problem).

    Precocking - Fast trigger response can be a matter of victory or defeat, especially in CQB situations. With precocking enabled, piston will remain in rear position after each shot with the spring already compressed, ensuring that next shot will be fired immediately after you pull the trigger. To release the spring after using precocking, pull the trigger and hold it for 2 seconds, after which a second shot will be fired, this time with no precocking and fully braked.

    2-stage trigger – Light trigger pull results with a single shot or burst, while a deeper pull will cause a burst or fully automatic fire. Following modes are available: semi – burst, semi – auto and burst – auto.

    Binary trigger - Allows for easy double shots in semi-automatic setting. After enabling this mode, if semi-automatic fire is set, shots will be fired not only when the trigger is pulled, but also when it is released.

    Rate of fire reduction - Reduce the rate of fire in automatic or burst fire to save ammo or make the replica shoot in a more realistic fashion.

    DMR mode - Introduces intervals between semiautomatic shots to comply with DMR rules on some fields.

    Low battery voltage alarm - Dedicated for Li-Po and Li-Ion batteries. Should the battery voltage fall to a dangerously low level, user will be notified by short sound signals that are repeated every minute. This may also be freely switched on and off.

    DSG – a sector gear detection mode specially prepared to work with dual sector gears.

    Diagnostic system - Constantly monitors the replica and the mosfet itself. In case of any problems, immediately lets you know what it might be, making troubleshooting much easier.

    Electronic fuse - Will save your replica and battery in case of a major malfunction. It will automatically disconnect the battery when a short circuit or blocked motor is detected.

    Programming of all the settings is done solely by using quick and easily memorable sequences of fire selector switching and trigger pulls supported by sound signals and multicolor LED diode. That allows changing the settings in any moment, in a matter of seconds, even under enemy fire. All settings are set independently for each selector position, so you can program the mosfet exactly the way you want, for example semi on semi and binary trigger on auto.
    Perun V3 Hybrid works without problems with any battery from 7V do 17V. It can also be used with most extreme setups.

    Perun V3 HYBRID mosfet

  • JEFFTRON Leviathan Mosfet V3 Optical

    The Leviathan - V3 is one of the most advanced ETU (electronic trigger unit) on the market. It has all optical sensors for better handling and durability. Build-in wireless communication for quick setup using iOS or Android smartphones!

    Foam on the trigger makes great hair trigger modefoam_hair_trigger

    63920.jpg?time=1619013333401

    Real feel trigger system (RFTS), spring simulates trigger resistance like in the real AK74. It adds secondary resistance with release after the fire. RFTS was designed by professional gunsmith for more realistic feel from shooting

    RFTS_springRFTS_inside

    • External input port and output pads serves for custom accessories
    • Real time response for change settings -> immediately test result
    • Easy installation into the gearbox instead of the original trigger contacts
    • Completely made wiring allows the fastest and the easiest installation into the gun. No soldering is needed
    • New functions are for free for every user via online update
    • The Leviathan - V3 brings endless possibilities for your gun!

    2YEARS_WARRANTY

     Leviathan – V3 supports these airsoft guns:

    • AK47, AK74, Galil, Bizon with V3 gearbox according to TM design
    • Tokyo Marui AK47 Next Generation
    • G36, XM8 with V3 gearbox according to TM design
    • Tokyo Marui G36 Next Generation
    • ASG CZ 805 BREN
    • AUG, UAR with V3 gearbox according to TM design
    • Fal/SA58 with V3 gearbox according to TM design
    • MP5K, UMP with V3 gearbox according to TM design
    • SIG 55X with V3 gearbox according to TM design
    • S&T VSS or VAL

     63932.jpg?time=1619013410917

    SAFETY WARNING :


    - Installation of this device into the gearbox requires advanced technician skills!
    - Please read these informations before installing your device to prevent any damage.
    - Short circuit or incorrectly connected battery will cause immediate damage to the device which is not covered by the warranty. It can lead to fire or even battery explosion.
    - Disconnect battery, when you aren't using the gun! Otherwise you will fully discharge the battery. Because the device drains small amount of current from the bettery all the time.
    - Do not connect battery when gun pointing towards you, another person or an animal.
    - Do not modify, repair and put into any kind of liquids or thermal shock the Leviathan - V3.

    JEFFTRON Leviathan Mosfet V3 Optical

This part will be assembled and tested

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    7,42 €

  • Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    7,42 €

  • Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    7,42 €

  • Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    7,42 €

  • Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 50 Degree (green)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    8,25 €

  • Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 60 Degree (yellow)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    8,25 €

  • Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 70 Degree (blue)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    8,25 €

  • Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 75 Degree (pink)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    8,25 €

  • Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    If your hop-up adjustment is not having a big effect on the hop-up of your BBs, then it probably means that your hop-up packing is worn down and is not gripping the BB properly before it is fired out. A new hop-up packing will allow more accurate hop-up adjustments. Tested and approved by RedWolf. Best used on guns that shoot below 400fps.

    10,75 €
    Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    10,75 €

  • Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.25 BBs or more

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    12,42 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    12,42 €

  • Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.2 BBs

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    11,58 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    11,58 €

  • Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    Maple Leaf Super Macaron is aspecial developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)

    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    8,25 €

  • Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    8,25 €

  • Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    8,25 €

  • Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    8,25 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Option No.1 Motor Brushless Hi-torque short plug-in

    The OptionNo.1 brand unveilsa brand new Hi-torque axe short Brushless motor that will allow you to upgrade your AEG replica. The special features of the Brushless motor allow you to benefit from impressive performance while reducing electrical consumption and removing the constraints of a conventional carbon motor.

    This motor is suitable for all mosfets! * see table below

    option-no1-moteur-brushless-hi-torque-lo

    • Increased response time compared to a conventional engine
    • Power consumption down
    • Operation by magnetic field
    • No motor brushes
    • Heats much less than a conventional engine
    • More torque
    • No mechanical and electrical loss
    • High performance
    • Plug-in design simple to install
    • 7.4V 31000 rpm LiPo battery
    • LiPo 11.1v 46000 rpm battery
    • Low voltage protection
    • Overheating protection
    • 100 Protection temperature protection
    108,25 €
    Option No.1 Motor Brushless Hi-torque short plug-in

    108,25 €

  • Guarder Infinite Torque-Up motor - Short Type

    Guarder Infinite Torque-Up Type Motor :

    Two Ball Bearing Bushing Inside
    Guarder Motor Pinion Gear (Thermal Treatment)

    40,75 €
    Guarder Infinite Torque-Up motor - Short Type

    40,75 €

  • Nimrod NT Blackbird 20K CNC Motor Short axis

    The Blackbird 20K series is built with solid materials and is suitable for every setup. Due to the high TPA (Turns Per Armature) it can easily pull up all of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 20000
    • TPA: 26
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 18:1 / 16:1 / 13:1 / 12:1
    • Springs : all
    56,58 €
    Nimrod NT Blackbird 20K CNC Motor Short axis

    56,58 €

  • Nimrod NT Blackbird 26K CNC Motor Short axis

    The Blackbird 26K series is built with solid materials and is suitable for nearly every setup. Due to the high TPA (Turns Per Armature) it can easily pull up all kinds of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 26000
    • TPA: 19
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1 / 16:1 / 13:1 / 12:1
    • Springs : M110+
    56,58 €
    Nimrod NT Blackbird 26K CNC Motor Short axis

    56,58 €

  • Nimrod NT Blackbird 30K CNC Motor Short axis

    The Blackbird 30K series is built with solid materials and is suitable for nearly every setup. Due to the high TPA (Turns Per Armature) it can easily pull up most of of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 30000
    • TPA: 16
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1 / 16:1 / 13:1
    • Springs : M100-M150
    58,25 €
    Nimrod NT Blackbird 30K CNC Motor Short axis

    58,25 €

  • Nimrod NT Blackbird 39K CNC Motor Short axis

    The Blackbird 39K series is built with solid materials and is suitable for nearly every setup. Due to the high rpm, it also can be used in short stroked 0.5 Joules or under 1 Joule builds. Take care of the spring and sector gear management to prevent a pre interlocking which will cause a broken piston or sector gear. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 39000
    • TPA: 14
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1 / 16:1
    • Springs : M100 to M140
    56,58 €
    Nimrod NT Blackbird 39K CNC Motor Short axis

    56,58 €

  • Nimrod NT Blackbird 45K CNC Motor Short axis

    The Blackbird 45K series is built with solid materials and is suitable for nearly every setup. Due to the high rpm, it also can be used in short stroked 0.5 Joules or under 1 Joule builds. Take care of the spring and sector gear management to prevent a pre interlocking which will cause a broken piston or sector gear. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 45000
    • TPA: 11
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1
    • Springs : M100 to M130
    56,58 €
    Nimrod NT Blackbird 45K CNC Motor Short axis

    56,58 €

  • Nimrod NT Blackbird 36K/27K CNC Brushless Motor short

    The Nimrod Tactical Brushless motor has 2 adjustable speed settings. Depending on the battery being used, either 27000 rpm or 36000 rpm can be set. Same as with the regular Nimrod motors, a D-shape pinion gear is used. Thus the power transmission is better and the change of the bevel gear is easier. The motor should only be used in conjunction with strong batteries. The C rating must necessarily be above 40 / 60. Also, the battery should have a high capacity (1400 mAh or more) to operate smoothly. The motor has been successfully tested with a variety of mosfets available on the market and it can be reported that all tested combinations worked well together.

    Please note that some Mosfet manufacturers cannot guarantee that operation with a brushless motor is possible. In this regard, always refer to the Mosfet manufacturer’s specifications. To ensure a trouble-free installation, the pinion to bevel gear position must be considered. Some grips and motor covers need to be modified to allow a perfect fit of the motor.

    149,92 €
    Nimrod NT Blackbird 36K/27K CNC Brushless Motor short

    149,92 €

  • SHS high torque motor short axis

    The SHS high-torque motor is an affordable, high quality AEG motor that has been enhanced for high torque output. Well known from every gunsmith for several years, it is an essential base for upgrading your replica, especially since its price / performance ratio is unbeatable.

    Features :

    • Steel pinion gear
    • Neodym magnets
    • 16 TPA
    • Excellent ROF and responsiveness
    • Short axis version
    29,08 €
    SHS high torque motor short axis

    29,08 €

  • G&G Talaria 40K Motor Short Axis

    • High-Performance Motor
    • Compatible to up to 12v Batteries
    • Designed for AEG
    • Shaft : short
    • Magnets: Neodymium
    • Maximum speed: 40000rpm
    66,66 €
    G&G Talaria 40K Motor Short Axis

    66,66 €

  • Warhead BASE Brushless motor 27K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 27,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    120,75 €
    Warhead BASE Brushless motor 27K short axis

    120,75 €

  • Warhead BASE Brushless motor 35K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 35,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    124,92 €
    Warhead BASE Brushless motor 35K short axis

    124,92 €

  • Warhead Motor Brushless HIGH speed 36K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    • High quality 7075 aluminum housing
    • Totally customized design with maximum power and torque
    • High temperature resistant quality copper winding
    • High quality magnets
    • Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    • High precision CNC design
    • High quality "D" insert for motor gear
    • Compatibility: AEG using short axis motors

    Information: 25,000 rpm in 7.4 v Lipo - 36,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    155,75 €
    Warhead Motor Brushless HIGH speed 36K short axis

    155,75 €

  • Warhead BASE Brushless motor 45K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 45,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    124,92 €
    Warhead BASE Brushless motor 45K short axis

    124,92 €

  • Warhead Motor Brushless ULTRAHIGH speed 52K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    • High quality 7075 aluminum housing
    • Totally customized design with maximum power and torque
    • High temperature resistant quality copper winding
    • High quality magnets
    • Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    • High precision CNC design
    • High quality "D" insert for motor gear
    • Compatibility: AEG using short axis motors

    Information: 35,000 rpm in 7.4 v Lipo - 52,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    149,92 €
    Warhead Motor Brushless ULTRAHIGH speed 52K short axis

    149,92 €

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

Workshop preparation :
  • Open the gearbox, take off everything inside, cleaning & degreasing shells
  • Adjusting the gears with inox shims only, one by one
  • Short stroke of the piston and sector gear
  • Angle of engagement optimisation (AOE) for piston and cylinder bumper
  • Greasing mecanic & pneumatic parts
Important note :
  • 12 month warranty by P6 Workshop
  • We recommend 11.1v lipo battery (not included) adviced in "accessories" section
  • Don't feed your mid cap magazine more than 80% of the maximal capacity
  • We strongly advice you to use high performance BBs such as BLS, Krytac, Madbull ASG blaster Devil or open Blaster.
  • Never use grease or any silicone on the electric gun, magazine or BBs

Data sheet

TypeSMG
Caliber6mm Airsoft
MaterialPolymer / Metal
Main colorBlack
Hop-upAdjustable
Firing modeSelectable
Power sourceElectric
Inner barrel (mm)250
Inner Barrel dia (mm)6.01
GearboxV3
Gearbox inserts8mm Bushings
Gear ratioSelectable
Quick change spring GearboxYes
Integrated MosfetSelectable
Trigger SystemElectronic
Motor versionShort axis
Magazine VersionMid-cap Spring operated
Magazine capacity95
BatteryNot Included
Battery chargerNot Included
Battery ConnectorDEAN (T-Plug)
Power (FPS @ 0.20gr)Selectable

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Accessories

Mosfet

Here is a sum-up list of the available mosfets for our custom AEG airsoft guns. Note that you may see or not see this options following the Custom replica.

Important note : With a high performance mosfet configuration, for each shot fired the motor is instantly launched and instantly stopped, wich mean the more you shoot fast with a lot of quantity shot in few timing, the motor is heating accordingly, this is normal, but too much is not advised. Our products are made to get a very responsive semi automatic and make short full auto. If you wish to fire a lot of BBs in during a short timing (speedQB, Machine gun), we strongly advice to get HPA system more suitable.

The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade Economic version with limited number of functions.

 VIDEO

TITAN V2 Advanced Set is an AEG Control System for V2 gearboxes which will transform your airsoft gun into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. TITAN V2 enables you to adjust the trigger sensitivity with military precision. The innovative proximity trigger sensor offers you even 250 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions.

 VIDEO

Leviathan - V2 is processor controlled mosfet with Bluetooth communication. It adds new shooting modes, controls RoF, pre-cocking, active braking, low battery indication, statistics... Everything is controlled via application in the smart phone (iOS and Android). Device is fully integrated inside the gearbox version 2 instead of the original trigger contacts. Comes with completely made wires to stock with 30A mini fuse and deanT connector - no soldering needed.

VIDEO 

This option feature a modified Gate TITAN module combined with ICFU System (Integrated Custom Firestop Upgrade) : the system makes stop firing the replica when there is no BB left in the magazine, just like a PTW !

  • Stop BBs when magazine is empty
  • Gate Titan integrated mosfet
  • No bolt stop system necessary to resume fire
  • ICFU requires special magazine, not possible to use regular M4 AEG Magazine
  • Please never update the Firware, that would delete the ICFU fonction permently

 VIDEO ICFU Magazine

This option feature a modified Jefftron Leviathan module combined with ICFU System (Integrated Custom Firestop Upgrade) : the system makes stop firing the replica when there is no BB left in the magazine, just like a PTW !

  • Stop BBs when magazine is empty
  • Jefftron Leviathan integrated mosfet
  • No bolt stop system necessary to resume fire
  • ICFU requires special magazine, not possible to use regular M4 AEG Magazine
  • Please never update the Firware, that would delete the ICFU fonction permently

 VIDEO  ICFU Magazine

Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

P6 Customs

P6 Customs

See all products from P6 Customs

Questions 

Pas de question client pour le moment.

Seuls les utilisateurs enregistrés peuvent poser une question. Login

Avis

Seuls les clients enregistrés peuvent poster un avis. Connectez-vous ou créez un compte .
Tri:

Aucun avis pour le moment.