P6 SCORPION EVO 3 SERIES custom AEG

P6-AEG-SCORPION

New product

Build time 3 - 6 days

Moyenne des votes pour ce produit
0 / 5
Moyenne : 0 / 5
Basée sur 0 avis clients.

Configure

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

Choose your ASG Scorpion version, large choice for everyone !

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • ASG SCORPION EVO 3 A1

    The CZ Scorpion EVO 3 A1 has been envisioned, developed and built by ASG, to bring the Airsoft player as close to the experience of handling the real EVO 3 as possible. Like a real gun, the EVO 3 will stop firing when its magazine runs empty, and require activation of the bolt catch after a reloaded magazine has been inserted. Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle both powerful springs and high-speed solutions.

    Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The fiber-reinforced polymer used in the construction is the same as the original submachine gun, making it one of the toughest Airsoft guns around. The EVO is designed to be built from fewer parts than most Airsoft guns. The simple construction using high quality components results in a durable, high performing AEG that is easy to take apart for service, maintenance and upgrades.

    Great effort went in to designing the details of this Airsoft gun, this is evident in how well everything fits together, from the tight fit of the folding adjustable stock on the receiver to the way the fire selector sounds when it clicks into position. Along the many unique features of the EVO 3 A1, it still offers many of the standard features found on other Airsoft guns allowing players to customize and upgrade their Airsoft gun.

    New designed gearbox :

    The EVO 3 A1 gearbox is designed from scratch by ASG, rather than modifying existing gearbox versions to deliver functions they were not intended for in the first place, the EVO 3 A1 internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle powerful springs or high-speed solutions. Add to all this the easy power change design with one-tool quick spring access, allowing fast in-the-field spring changes to best match mission requirements.

    EVO.JPG

    ECU controlled gearbox :

    Not content with the limitations of a traditional electrical gearbox, the EVO 3 A1 gearbox has been designed with an innovative electronic control unit. Benefits of using an electronically controlled Airsoft gun include; reduction in the number of mechanical and electrical parts resulting in increased battery and motor efficiency, while offering an instantaneous crisp trigger response that experienced Airsoft players appreciate. A lot of time and effort has gone into achieving the exact dimensions of the mag-well. This has been done to ensure that the magazine will sit perfectly, drop out easily when released and sound just right when a magazine is inserted.

    The EVO 3 A1 has been envisioned, designed and built to bring Airsoft players as close to the experience of handling the original (polymer) EVO 3 A1 as possible. All weight, size and handling characteristics have been constructed to match the real gun – and like a real gun, the Airsoft version will stop firing when its magazine runs empty, and requires activation of the bolt catch after a fresh magazine has been inserted.

    The EVO 3 A1 features an ergonomic design with fully ambidextrous controls that are easy to access and operate even while wearing gloves. Its compact size, lightweight and ambidextrous design lets it be handled by any player and makes it perfect for high speed games and CQB. Being a highly realistic licensed replica in both form and function this Airsoft gun will also appeal to both mil-sim and gun enthusiasts alike.

    Feature :

    • New designed gearbox
    • Easy velocity change
    • Electronically controlled gearbox
    • Empty magazine detection
    • 4-position fire selector with genuine 3-shot burst
    • ULTIMATE basic motor
    • CNC machined parts
    • Made in Europe

    ASG SCORPION EVO 3 A1

  • ASG SCORPION EVO 3 A1 - FDE

    The CZ Scorpion EVO 3 A1 has been envisioned, developed and built by ASG, to bring the Airsoft player as close to the experience of handling the real EVO 3 as possible. Like a real gun, the EVO 3 will stop firing when its magazine runs empty, and require activation of the bolt catch after a reloaded magazine has been inserted. Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle both powerful springs and high-speed solutions.

    Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The fiber-reinforced polymer used in the construction is the same as the original submachine gun, making it one of the toughest Airsoft guns around. The EVO is designed to be built from fewer parts than most Airsoft guns. The simple construction using high quality components results in a durable, high performing AEG that is easy to take apart for service, maintenance and upgrades.

    Great effort went in to designing the details of this Airsoft gun, this is evident in how well everything fits together, from the tight fit of the folding adjustable stock on the receiver to the way the fire selector sounds when it clicks into position. Along the many unique features of the EVO 3 A1, it still offers many of the standard features found on other Airsoft guns allowing players to customize and upgrade their Airsoft gun.

    New designed gearbox :

    The EVO 3 A1 gearbox is designed from scratch by ASG, rather than modifying existing gearbox versions to deliver functions they were not intended for in the first place, the EVO 3 A1 internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle powerful springs or high-speed solutions. Add to all this the easy power change design with one-tool quick spring access, allowing fast in-the-field spring changes to best match mission requirements.

    EVO.JPG

    ECU controlled gearbox :

    Not content with the limitations of a traditional electrical gearbox, the EVO 3 A1 gearbox has been designed with an innovative electronic control unit. Benefits of using an electronically controlled Airsoft gun include; reduction in the number of mechanical and electrical parts resulting in increased battery and motor efficiency, while offering an instantaneous crisp trigger response that experienced Airsoft players appreciate. A lot of time and effort has gone into achieving the exact dimensions of the mag-well. This has been done to ensure that the magazine will sit perfectly, drop out easily when released and sound just right when a magazine is inserted.

    The EVO 3 A1 has been envisioned, designed and built to bring Airsoft players as close to the experience of handling the original (polymer) EVO 3 A1 as possible. All weight, size and handling characteristics have been constructed to match the real gun – and like a real gun, the Airsoft version will stop firing when its magazine runs empty, and requires activation of the bolt catch after a fresh magazine has been inserted.

    The EVO 3 A1 features an ergonomic design with fully ambidextrous controls that are easy to access and operate even while wearing gloves. Its compact size, lightweight and ambidextrous design lets it be handled by any player and makes it perfect for high speed games and CQB. Being a highly realistic licensed replica in both form and function this Airsoft gun will also appeal to both mil-sim and gun enthusiasts alike.

    Feature :

    • New ECU board
    • With T-Plug Connectors
    • New designed gearbox
    • Easy velocity change
    • Electronically controlled gearbox
    • Empty magazine detection
    • 4-position fire selector with genuine 3-shot burst
    • LiPo born
    • ULTIMATE basic motor
    • CNC machined parts
    • Made in Europe

    ASG SCORPION EVO 3 A1 - FDE

  • ASG SCORPION EVO 3 ATEK

    The Scorpion EVO 3 ATEK rifle is a ‘ready to go’ EVO with the new ATEK kit already fitted to it. Not only does the new ATEK rifle EVO come with the ergonomic handguard, angled foregrip and enhanced magwell, but this new ATEK rifle comes with an extended magazine release lever and a flash suppressor threaded to fit 11 mm pistol accessories as standard. All of those features alone make the ATEK complete rifle a great purchase for your store but if you add to the above features the addition of the latest ECU unit for improved fire control and the T-Plug battery connectors and it’s an AEG that’s sure to fly off your shelves as the most up to date EVO available.

    • New ECU board
    • With T-Plug Connectors
    • Ergonomic handguard
    • Angled foregrip
    • Enhanced magwell
    • Extended magazine release lever
    • Flash suppressor – fits 11 mm pistol accessories as standard
    • New designed gearbox
    • Easy spring change
    • Electronically controlled gearbox
    • Empty magazine detection
    • 4-position fire selector with genuine 3-shot burst
    • LiPo ready
    • ULTIMATE basic motor
    • CNC machined parts
    • Made in Denmark
    ASG SCORPION EVO 3 ATEK

  • ASG SCORPION EVO 3 ATEK - TAN

    The Scorpion EVO 3 ATEK rifle is a ‘ready to go’ EVO with the new ATEK kit already fitted to it. Not only does the new ATEK rifle EVO come with the ergonomic handguard, angled foregrip and enhanced magwell, but this new ATEK rifle comes with an extended magazine release lever and a flash suppressor threaded to fit 11 mm pistol accessories as standard. All of those features alone make the ATEK complete rifle a great purchase for your store but if you add to the above features the addition of the latest ECU unit for improved fire control and the T-Plug battery connectors and it’s an AEG that’s sure to fly off your shelves as the most up to date EVO available.

    • New ECU board
    • With T-Plug Connectors
    • Ergonomic handguard
    • Angled foregrip
    • Enhanced magwell
    • Extended magazine release lever
    • Flash suppressor – fits 11 mm pistol accessories as standard
    • New designed gearbox
    • Easy spring change
    • Electronically controlled gearbox
    • Empty magazine detection
    • 4-position fire selector with genuine 3-shot burst
    • LiPo ready
    • ULTIMATE basic motor
    • CNC machined parts
    • Made in Denmark
    ASG SCORPION EVO 3 ATEK - TAN

  • ASG SCORPION EVO 3 A1 Carbine

    The CZ Scorpion EVO 3 A1 has been envisioned, developed and built by ASG, to bring the Airsoft player as close to the experience of handling the real EVO 3 as possible. Like a real gun, the EVO 3 will stop firing when its magazine runs empty, and require activation of the bolt catch after a reloaded magazine has been inserted. Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle both powerful springs and high-speed solutions.

    Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The fiber-reinforced polymer used in the construction is the same as the original submachine gun, making it one of the toughest Airsoft guns around. The EVO is designed to be built from fewer parts than most Airsoft guns. The simple construction using high quality components results in a durable, high performing AEG that is easy to take apart for service, maintenance and upgrades.

    Great effort went in to designing the details of this Airsoft gun, this is evident in how well everything fits together, from the tight fit of the folding adjustable stock on the receiver to the way the fire selector sounds when it clicks into position. Along the many unique features of the EVO 3 A1, it still offers many of the standard features found on other Airsoft guns allowing players to customize and upgrade their Airsoft gun.

    New designed gearbox :

    The EVO 3 A1 gearbox is designed from scratch by ASG, rather than modifying existing gearbox versions to deliver functions they were not intended for in the first place, the EVO 3 A1 internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle powerful springs or high-speed solutions. Add to all this the easy power change design with one-tool quick spring access, allowing fast in-the-field spring changes to best match mission requirements.

    EVO.JPG

    ECU controlled gearbox :

    Not content with the limitations of a traditional electrical gearbox, the EVO 3 A1 gearbox has been designed with an innovative electronic control unit. Benefits of using an electronically controlled Airsoft gun include; reduction in the number of mechanical and electrical parts resulting in increased battery and motor efficiency, while offering an instantaneous crisp trigger response that experienced Airsoft players appreciate. A lot of time and effort has gone into achieving the exact dimensions of the mag-well. This has been done to ensure that the magazine will sit perfectly, drop out easily when released and sound just right when a magazine is inserted.

    The EVO 3 A1 has been envisioned, designed and built to bring Airsoft players as close to the experience of handling the original (polymer) EVO 3 A1 as possible. All weight, size and handling characteristics have been constructed to match the real gun – and like a real gun, the Airsoft version will stop firing when its magazine runs empty, and requires activation of the bolt catch after a fresh magazine has been inserted.

    The EVO 3 A1 features an ergonomic design with fully ambidextrous controls that are easy to access and operate even while wearing gloves. Its compact size, lightweight and ambidextrous design lets it be handled by any player and makes it perfect for high speed games and CQB. Being a highly realistic licensed replica in both form and function this Airsoft gun will also appeal to both mil-sim and gun enthusiasts alike.

    Feature :

    • New designed gearbox
    • Easy velocity change
    • Electronically controlled gearbox
    • Empty magazine detection
    • 4-position fire selector with genuine 3-shot burst
    • ULTIMATE basic motor
    • CNC machined parts
    • Made in Europe

    ASG SCORPION EVO 3 A1 Carbine

  • ASG SCORPION EVO 3 A1 Carbine - TAN

    Carbine version of the EVO 3 A1 submachinegun, with extended bull-barrel and handguard featuring M-Lok attachment points. The CZ Scorpion EVO 3 A1 has been envisioned, developed and built by ASG, to bring the Airsoft player as close to the experience of handling the real EVO 3 as possible. Like a real gun, the EVO 3 will stop firing when its magazine runs empty, and require activation of the bolt catch after a reloaded magazine has been inserted. Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle both powerful springs and high-speed solutions.
      

    • New ECU board
    • With T-Plug Connectors
    • New designed gearbox
    • Easy velocity change
    • Electronically controlled gearbox
    • Empty magazine detection
    • 4-position fire selector with genuine 3-shot burst
    • LiPo born
    • M-Lok
    • ULTIMATE basic motor
    • CNC machined parts
    • Made in Europe
    ASG SCORPION EVO 3 A1 Carbine - TAN

  • ASG SCORPION EVO 3 A1 BET

    The CZ Scorpion EVO 3 A1 has been envisioned, developed and built by ASG, to bring the Airsoft player as close to the experience of handling the real EVO 3 as possible. Like a real gun, the EVO 3 will stop firing when its magazine runs empty, and require activation of the bolt catch after a reloaded magazine has been inserted. Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle both powerful springs and high-speed solutions.

    Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The fiber-reinforced polymer used in the construction is the same as the original submachine gun, making it one of the toughest Airsoft guns around. The EVO is designed to be built from fewer parts than most Airsoft guns. The simple construction using high quality components results in a durable, high performing AEG that is easy to take apart for service, maintenance and upgrades.

    Great effort went in to designing the details of this Airsoft gun, this is evident in how well everything fits together, from the tight fit of the folding adjustable stock on the receiver to the way the fire selector sounds when it clicks into position. Along the many unique features of the EVO 3 A1, it still offers many of the standard features found on other Airsoft guns allowing players to customize and upgrade their Airsoft gun.

    New designed gearbox :

    The EVO 3 A1 gearbox is designed from scratch by ASG, rather than modifying existing gearbox versions to deliver functions they were not intended for in the first place, the EVO 3 A1 internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle powerful springs or high-speed solutions. Add to all this the easy power change design with one-tool quick spring access, allowing fast in-the-field spring changes to best match mission requirements.

    EVO.JPG

    ECU controlled gearbox :

    Not content with the limitations of a traditional electrical gearbox, the EVO 3 A1 gearbox has been designed with an innovative electronic control unit. Benefits of using an electronically controlled Airsoft gun include; reduction in the number of mechanical and electrical parts resulting in increased battery and motor efficiency, while offering an instantaneous crisp trigger response that experienced Airsoft players appreciate. A lot of time and effort has gone into achieving the exact dimensions of the mag-well. This has been done to ensure that the magazine will sit perfectly, drop out easily when released and sound just right when a magazine is inserted.

    The EVO 3 A1 has been envisioned, designed and built to bring Airsoft players as close to the experience of handling the original (polymer) EVO 3 A1 as possible. All weight, size and handling characteristics have been constructed to match the real gun – and like a real gun, the Airsoft version will stop firing when its magazine runs empty, and requires activation of the bolt catch after a fresh magazine has been inserted.

    The EVO 3 A1 features an ergonomic design with fully ambidextrous controls that are easy to access and operate even while wearing gloves. Its compact size, lightweight and ambidextrous design lets it be handled by any player and makes it perfect for high speed games and CQB. Being a highly realistic licensed replica in both form and function this Airsoft gun will also appeal to both mil-sim and gun enthusiasts alike.

    Feature :

    • New designed gearbox
    • Easy velocity change
    • Electronically controlled gearbox
    • Empty magazine detection
    • 4-position fire selector with genuine 3-shot burst
    • ULTIMATE basic motor
    • CNC machined parts
    • Made in Europe

    ASG SCORPION EVO 3 A1 BET

  • ASG SCORPION EVO 3 A1 BET - TAN

    B.E.T. version of the EVO 3 A1, with the appearance of a suppressed submachinegun with extended barrel covered by a B.E.T and handguard featuring M-Lok attachment points. The CZ Scorpion EVO 3 A1 has been envisioned, developed and built by ASG, to bring the Airsoft player as close to the experience of handling the real EVO 3 as possible. Like a real gun, the EVO 3 will stop firing when its magazine runs empty, and require activation of the bolt catch after a reloaded magazine has been inserted. Where the standard in Airsoft is to replicate the exterior in appearance only, the EVO 3 is built to be as tough as the real thing. The internals have been purpose built to deliver advanced functions by using custom electronics, while having the strength necessary to handle both powerful springs and high-speed solutions.
     

    •  New ECU board
    • With T-Plug Connectors
    • New designed gearbox
    • Easy velocity change
    • Electronically controlled gearbox
    • Empty magazine detection
    • 4-position fire selector with genuine 3-shot burst
    • LiPo born
    • M-Lok
    • ULTIMATE basic motor
    • CNC machined parts
    • Made in Europe
    ASG SCORPION EVO 3 A1 BET - TAN

Choose your output power, value in FPS with 0.20gr BBs. Please note : FPS may vary, we cannot garantee exact FPS asked, it will be a range. For low power configuration please note that the cylinder can be modified.

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • 270 FPS

    270 FPS

  • 280 FPS

    280 FPS

  • 290 FPS

    290 FPS

  • 300 FPS

    300 FPS

  • 310 FPS

    310 FPS

  • 320 FPS

    320 FPS

  • 330 FPS

    330 FPS

  • 340 FPS

    340 FPS

  • 350 FPS

    350 FPS

  • 360 FPS

    360 FPS

  • 370 FPS

    370 FPS

  • 380 FPS

    380 FPS

  • 390 FPS

    390 FPS

  • 400 FPS

    400 FPS

  • 410 FPS

    410 FPS

  • 420 FPS

    420 FPS

  • 430 FPS

    430 FPS

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • SAFE - SEMI - AUTO

    SAFE - SEMI - AUTO

  • SAFE - SEMI - BURST3

    SAFE - SEMI - BURST3

  • SAFE - SEMI ONLY

    SAFE - SEMI ONLY

Choose Your piston. Basically, we advise you to choose the Balystik which is very versatile and resistant, but you can choose another model ! We make AOE modification of the piston + piston head whatever the model chosen in order to allow a perfect start of the cycle between the sector gear and the first piston teeth.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Lightweight 14 teeth Piston

    • Essential part for upgrading your Airsoft AEG
    • Polymer Construction Lightweight piston with high impact-durability
    • 14 Full Teeth rack gear made of metal
    • Suitable for mainstream high-speed tune-up and has excellent operational characteristics
    • The Grease grooves cut on the rail-guides keep it lubricated
    • Suitable for standard AEG gearbox Tokyo Marui and clones
    Lightweight 14 teeth Piston

  • Balystik polycarbonate 14 steel teeth piston for AEG

    • Balystik polycarbonate 14 teeth steel piston
    • Extremely durable body made of polycarbonate
    • 14 Full Teeth rack gear made of metal
    • 16gr only
    • Suitable for all configuration from high speed to high torque
    • Suitable for standard AEG gearbox Tokyo Marui and clones
    Balystik polycarbonate 14 steel teeth piston for AEG

  • Balystik ULTRALIGHT 14 steel teeth piston for AEG

    • Balystik ULTRALIGHT 14 teeth steel piston
    • Ultralightweight "cheese edition" with 7 openings
    • Extremely durable reinforced POM construction
    • 14 Full Teeth rack gear made of metal
    • 13,3gr only
    • Suitable for high speed and semi automatic shooting with high rate trigger response
    • Suitable for standard AEG gearbox Tokyo Marui and clones
    Balystik ULTRALIGHT 14 steel teeth piston for AEG

  • POINT POLICARBON PISTON WITH 14 STEEL TEETH

    POINT POLICARBON PISTON WITH 14 STEEL TEETH

  • FPS Softair Full Metal Teeth light Piston

    FPS is proud to present the first lightened piston with 100% Made in Italy technopolymer body and all metal teeth.

    For the material of the piston the POM C was chosen, a technopolymer with high mechanical performances and a very low friction coefficient because it is self lubricating. The rack has been manufactured using MIM (Metal Injection Molding) technology, because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed. The type of metal injected is SAE 4650 which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder. Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    FPS Softair Full Metal Teeth light Piston

  • FPS Softair Full Metal Teeth Piston

    FPS is proud to present the first piston with 100% Made in Italy technopolymer body and all metal teeth.

    For the material of the piston the POM C was chosen, a technopolymer with high mechanical performances and a very low friction coefficient because it is self lubricating. The rack has been manufactured using MIM (Metal Injection Molding) technology, because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed. The type of metal injected is SAE 4650 which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder. Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    FPS Softair Full Metal Teeth Piston

  • FPS Softair ZERO-SHOCK Lightened 14 Teeth Piston

    FPS is proud to present the first ZERO-SHOCK lightened piston with 100% Made in Italy technopolymer body and full metal teeth. This system patented by Fps allows to attenuate the stresses that the rack transmits to the piston body and it makes the assembly enormously more resistant and reliable than a normal piston.

    For the material of the piston was chosen a reinforced technopolymer with added elastomer with high mechanical performances and a very low friction coefficient. The rack has been manufactured using MIM (Metal Injection Molding) technology because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed.


    The type of metal injected is SAE 4650 + HRC38-42 hardening treatment which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder.

    Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    FPS Softair ZERO-SHOCK Lightened 14 Teeth Piston

  • FPS Softair ZERO-SHOCK 14 Teeth Piston

    FPS is proud to present the first ZERO-SHOCK piston with 100% Made in Italy technopolymer body and full metal teeth. This system patented by Fps allows to attenuate the stresses that the rack transmits to the piston body and it makes the assembly enormously more resistant and reliable than a normal piston.

    For the material of the piston was chosen a reinforced technopolymer with added elastomer with high mechanical performances and a very low friction coefficient. The rack has been manufactured using MIM (Metal Injection Molding) technology because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed.


    The type of metal injected is SAE 4650 + HRC38-42 hardening treatment which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder.

    Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    FPS Softair ZERO-SHOCK 14 Teeth Piston

Choose your piston head. Basically, we advise you to choose the Balystik CNC aluminum bearing Piston head model which is very versatile and resistant, but you can choose another model ! We make AOE modification of the piston + piston head whatever the model chosen in order to allow a perfect start of the cycle between the sector gear and the first piston teeth.

  • Balystik CNC aluminum bearing Piston head

    This piston head has 8 ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each piston head is made of CNC aluminium and it is also anodized for smooth surface finish. This is the most advanced version with 11.8gr only, 8 ventilation holes for higher speed and rate of fire, ball-bearing and excellent seal.

    • Essential part for upgrading your Airsoft AEG
    • Made of CNC aluminum with hard anodize
    • Ball bearing system help reduce spring torsion
    • 8 Holes ventilation
    • 11.8gr only
    • Suitable for all configurations from high-speed to high torque set-ups
    • Suitable for standard AEG gearbox Tokyo Marui and clones
    Balystik CNC aluminum bearing Piston head

  • SHS Aluminum ventilated piston head 6 holes - red

    Piston head HI-FLOW mounted with a bearing. The piston head has 6 holes allowing perfect replica cycle and a optimal compression of the seal rubber in the cylinder.

    SHS Aluminum ventilated piston head 6 holes - red

  • SHS Aluminum ventilated piston head 8 holes - blue

    Piston head HI-FLOW mounted with a bearing. The piston head has 8 holes allowing perfect replica cycle and a optimal compression of the seal rubber in the cylinder.
    SHS Aluminum ventilated piston head 8 holes - blue

  • SHS Aluminum ventilated piston head 8 holes - red

    Piston head HI-FLOW mounted with a bearing. The piston head has 8 holes allowing perfect replica cycle and a optimal compression of the seal rubber in the cylinder.
    SHS Aluminum ventilated piston head 8 holes - red

  • FPS Softair POM piston head for high rof and silence (TPAVP)

    POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (TPAVP). It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass.

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    FPS Softair POM piston head for high rof and silence (TPAVP)

  • FPS Softair POM piston head for high rof and silence (XPAVP)

    POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (XPAVP). It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass.

    Technical specifications:

    Weight: 5.56 grams (with technopolymer washer)

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    FPS Softair POM piston head for high rof and silence (XPAVP)

  • FPS Softair double o-ring ball bearing AEG Piston Head

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (TPGE).

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 6 ventilation holes. This piston head is the most traditional of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision.
    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.
    Compatibility :

    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :

    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...


    Weight: 11.9 grams
    100% MARUI COMPATIBLE
    100% MADE IN ITALY
    FPS Softair double o-ring ball bearing AEG Piston Head

  • FPS Softair double o-ring ball bearing light Piston Head

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (TPPE).

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision.

    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :

    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :

    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    Weight: 11.3 grams
    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    FPS Softair double o-ring ball bearing light Piston Head

  • FPS Softair double o-ring ball bearing high speed Piston Head

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head Advanced Type (TPAVN).

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder.  This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision.

    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :

    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :

    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    Weight: 11.2 grams

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    FPS Softair double o-ring ball bearing high speed Piston Head

  • FPS Softair ball bearing Piston Head with X-RING

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (XPGE).

    XPGE new version with X-RING and one piece plastic shim for AOE. The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 6 ventilation holes. This piston head is the most traditional of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :
    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :
    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    FPS Softair ball bearing Piston Head with X-RING

  • FPS Softair double o-ring ball bearing Piston Head X-RING

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (XPPE).

    New version whith X-RING and one piece plastic shim for AOE. The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas. 

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    FPS Softair double o-ring ball bearing Piston Head X-RING

  • FPS Softair POM double o-ring ball bearing AEG Piston Head

    FPS CNC POM Double O-Ring Ball Bearing AEG Piston Head (TPPD).

    The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This is the most advanced version with 6 ventilation holes. This piston head is the ligthest of our piston heads and improves the performance of your aeg, double o-ring and ball-bearing. This piston head is constructed out of CNC POM for durability and precision.

    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Weight: 8,7 grams

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    FPS Softair POM double o-ring ball bearing AEG Piston Head

  • FPS Softair ball bearing POM Piston Head with X-RING

    FPS CNC POM Double O-Ring Ball Bearing AEG Piston Head (XPPD).

    XPPD new version with X-RING and one piece plastic shim for AOE. The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This is the most advanced version with 6 ventilation holes. This piston head is the ligthest of our piston heads and improves the performance of your aeg, double o-ring and ball-bearing. This piston head is constructed out of CNC POM for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :
    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :
    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    FPS Softair ball bearing POM Piston Head with X-RING

  • FPS Softair CNC Ball Bearing Piston Head Pressure Deviation (TPAE)

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    FPS Softair CNC Ball Bearing Piston Head Pressure Deviation (TPAE)

  • FPS Softair ball bearing POM Piston Head double oring and adjustable AOE

    CNC POM Double O-Ring Ball Bearing AEG Piston Head with adjustable AOE (TPPA)

    The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This piston head allows to adjust the length of the piston of 1-2-3 or 4 mm, and it can also be used without shims. Find a perfect AOE improves the reliability of your gun. This piston head is one of the most ligthest of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC POM for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    FPS Softair ball bearing POM Piston Head double oring and adjustable AOE

  • FPS Softair ball bearing POM Piston Head for high speed ROF

    POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (TPNS). It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center with different angles) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. This piston head was developed thanks to the experience of Nico Saccocci of NikkSakk.Extreme.Airsoftcustom.


    The product is supplied with a metallic bearing and washer in orange-colored technopolymer. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass.
    Technical specifications:

    Weight: 8.3 grams (with metal pad)
    Weight: 5.5 grams (with technopolymer washer)

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    FPS Softair ball bearing POM Piston Head for high speed ROF

  • FPS Softair ball bearing POM Piston Head X-RING and adjustable AOE

    CNC POM Double O-Ring Ball Bearing AEG Piston Head with adjustable AOE (XPPA), new version with X-RING technology.

    The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This piston head allows to adjust the length of the piston of 1-2-3 or 4 mm, and it can also be used without shims. Find a perfect AOE improves the reliability of your gun. This piston head is one of the most ligthest of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC POM for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    FPS Softair ball bearing POM Piston Head X-RING and adjustable AOE

  • GATE CNC HIGH SPEED Piston Head

    The piston head designed for the most demanding DSG and speed builds, helping achieve the best results and overcome limits. Thanks to the use of 10 vents, airflow significantly increases improving sealing. The ultra-lightweight POM material together with CNC machining ensures repeatability of shots, perfect head-to-cylinder seal, high RPS ratio, and eliminates FPS drops. The adjustable AOE makes it essential for every speed build. 

    Features:

    • Designed especially for most demanding DSG and speed builds
    • 10 vents enhancing airflow and sealing
    • Ultra-lightweight POM material
    • CNC machining
    • Perfect head-to-cylinder seal
    • AOE spacer included
    • No AEG modification required
    • Dedicated especially to pros and skilled users
    • Piston head weight 2.7 g (without bearing)

    Compatibility:

    • Ideal for max M140 spring power
    • All standard AEG cylinders
    • All standard AEG cylinder heads
    • All standard AEG pistons
    • O-rings 19x2.4 mm

    Kit contents:

    • HIGH SPEED Piston Head – POM
    • AOE spacer
    • 1 bearing
    • 2 installation screws
    • 2 o-rings
    • QR Code containing quickstart guide
    GATE CNC HIGH SPEED Piston Head

  • Maxx Model CNC Aluminum Double O-Ring Ball Bearing AEG Piston Head

    Maxx Model CNC Aluminum Double O-Ring Ball Bearing AEG Piston Head

  • FPS Softair technopolymer / Carbon fiber piston head Xring

    Xring Carbon fiber reinforced technopolymer piston head designed for high rof and to increase the silence of the aeg (XPAVPCF) It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass. Supplied with VITON Xring for maximum smoothness and chemical resistance to lubricants.

    FPS Softair technopolymer / Carbon fiber piston head Xring

  • FPS Softair POM / Carbon fiber piston head

    Carbon fiber reinforced pom piston head designed for high rof and to increase the silence of the aeg (TPAVPCF) It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass. Supplied with VITON oring for maximum smoothness and chemical resistance to lubricants

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    FPS Softair POM / Carbon fiber piston head

Choose your Cylinder head. Basically, we advise you to choose the Balystik CNC aluminum Cylinder head model which is very versatile and resistant, but you can choose another model !

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Balystik CNC aluminum V2 Cylinder head

    Balystik AEG GearBox Cylinder Head version 2

    • Great Upgrade for any gearbox
    • Made of aluminum and anodized for smooth surface finish
    • Ultra lightweight product with less than 10gr
    • Build by CNC process to ensure a product with maximum durability and precision
    • The dual orings ensure a perfect seal on all cylinders on the market
    • Powerful 3.6mm rear bumper that absorbs the shock from the piston head
    • Additional front bumper on the nozzle side to prevent any vibration between the gearbox and the cylinder head
    • Perfect for most : M4 , M16 , SR16 , MP5 , MC51 , G3 , M249 , LR300
    • Compatible with ICS, Tokyo Marui, Classic Army, VFC
    Balystik CNC aluminum V2 Cylinder head

  • SHS V2 Cylinder head with pad

    SHS V2 Cylinder head with pad

  • Specna Arms aluminium cylinder head V2/V3 for AEG

    Specna Arms aluminium cylinder head V2/V3 for AEG

  • POINT Aluminum Silent Cylinder Head V2

    POINT Aluminum Silent Cylinder Head V2

  • FPS Softair V2 CNC Cylinder Head with 70 degrees

    • FPS  Airsoft AEG Gear Box / Mech Box Cylinder Head version 2 made of ERGAL (TC02B).
    • Great Upgrade for any gear box.
    • Each FPS Cylinder head is made of ERGAL and it is also anodized for smooth surface finish.
    • The Cylinder heads are CNC manufactured to ensure a product with maximum durability and precision.
    • Powerful built in UREPAN bumper that absorbs the shock from the piston head.

    Among the excellent characteristics of UREPAN are:

    - high dynamic load capacity
    - high abrasion and tear propagation resistance
    - highest modulus of elasticity of all elastomers
    - excellent mechanical wear resistance
    - high impact resilience
    - low compression set
    - non-marking floor protection
    - non-staining wheel tread material

    Hardness of orange rubber = 70 degrees shore which makes it suitable for multipurpose use.

    Furthermore, UREPAN offers good chemical resistance to mineral oils and greases as well as various solvents. UREPAN is recommended for all applications with high demands regarding load capacity, rebound resilience, speed and durability.

    • Perfect for most : M4 , M16 , SR16 , MP5 , MC51 , G3 , M249 , LR300 and any Version 2 gearbox AEG.
    • Compatible with ICS, Tokyo Marui, Classic Army, VFC and more.
    • This product is designed and manufactured entirely in Italy by technicians who have years of experience in the repair and modification of airsoft replicas.
    • 100% MADE IN ITALY
    • 100% MARUI COMPATIBLE
    FPS Softair V2 CNC Cylinder Head with 70 degrees

  • FPS Softair V2 CNC Cylinder Head with 60 degrees

    • FPS  Airsoft AEG Gear Box / Mech Box Cylinder Head version 2 made of ERGAL (TC02C).
    • Great Upgrade for any gear box.
    • Each FPS Cylinder head is made of ERGAL and it is also anodized for smooth surface finish.
    • The Cylinder heads are CNC manufactured to ensure a product with maximum durability and precision.
    • Powerful built in UREPAN bumper that absorbs the shock from the piston head.

    Among the excellent characteristics of UREPAN are:

    - high dynamic load capacity
    - high abrasion and tear propagation resistance
    - highest modulus of elasticity of all elastomers
    - excellent mechanical wear resistance
    - high impact resilience
    - low compression set
    - non-marking floor protection
    - non-staining wheel tread material

    Hardness of rubber = 60 degrees shore which makes it suitable for use on custom DMR, to protect notoriously fragile gerboxes and reduce the noise of the replica.

    Furthermore, UREPAN offers good chemical resistance to mineral oils and greases as well as various solvents. UREPAN is recommended for all applications with high demands regarding load capacity, rebound resilience, speed and durability.

    • Perfect for most : M4 , M16 , SR16 , MP5 , MC51 , G3 , M249 , LR300 and any Version 2 gearbox AEG.
    • Compatible with ICS, Tokyo Marui, Classic Army, VFC and more.
    • This product is designed and manufactured entirely in Italy by technicians who have years of experience in the repair and modification of airsoft replicas.
    • 100% MADE IN ITALY
    • 100% MARUI COMPATIBLE
    FPS Softair V2 CNC Cylinder Head with 60 degrees

  • MAxx Model CNC Aluminum Double Air Seal & Damper AEG Cylinder Head

    MAxx Model CNC Aluminum Double Air Seal & Damper AEG Cylinder Head

We advice 18:1 or 16:1 ratio wich is very good balance between torque and speed. Please note that for reliability of your replica only 18:1 gearset can be installed with a brushless motor.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • SHS 18:1 torque CNC gearset

    SHS 18:1 torque CNC gearset

  • SHS 16:1 speed CNC gearset

    SHS 16:1 speed CNC gearset

  • SHS 13:1 super high speed CNC gearset

    SHS 13:1 super high speed CNC gearset

  • SHS 12:1 extreme high speed CNC gearset

    Recommanded spring power : M100 or less, (330 FPS max)
    SHS 12:1 extreme high speed CNC gearset

  • BIG DRAGON metal / titanium 18:1 torque gearset

    • A set of extremely durable gears 18:1 dedicated to the V2 and V3 gearbox.
    • They were made of an alloy of steel and titanium, thanks to which their strength is increased.
    • The final machining of the gears was carried out on CNC machine tools, guaranteeing the precision of workmanship.
    • They are perfect for springs not stronger than 130 m/s.
    BIG DRAGON metal / titanium 18:1 torque gearset

  • BIG DRAGON metal / titanium 16:1 speed gearset

    • A set of extremely durable gears speed 16:1 dedicated to the V2 and V3 gearbox.
    • They were made of an alloy of steel and titanium, thanks to which their strength is increased.
    • The final machining of the gears was carried out on CNC machine tools, guaranteeing the precision of workmanship.
    • They are perfect for springs not stronger than 120 m/s.
    BIG DRAGON metal / titanium 16:1 speed gearset

  • BIG DRAGON metal / titanium 13:1 high speed gearset

    • A set of extremely durable gears super high speed 13:1 dedicated to the V2 and V3 gearbox.
    • They were made of an alloy of steel and titanium, thanks to which their strength is increased.
    • The final machining of the gears was carried out on CNC machine tools, guaranteeing the precision of workmanship.
    • They are perfect for springs not stronger than 110 m/s.
    BIG DRAGON metal / titanium 13:1 high speed gearset

  • Arcturus 13:1 Super High Speed CNC GearSet

    A set of steel gears with a 13:1 ratio for AEG. They are manufactured on CNC machines to guarantee solidity and durability. Ideal compatibility with V2 or V3 type gearboxes. By combining these gears with a High Speed type motor, adding an 11.1v lipo battery, this will allow you to reach a rate of fire of around 25-28rps.

    Arcturus 13:1 Super High Speed CNC GearSet

Choose your gearbox inserts. The bushings are extremely reliable while the bearings allow you to slightly reduce the cycle resistances. In any case, the components displayed are reliable and high quality.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Balystik 8mm CNC steel bushing


    • Essential part for upgrading your Airsoft AEG
    • Suitable for 8mm AEG gearbox Tokyo Marui and clones
    • Made of steel with CNC process
    • Exceptional stability and durability
    • height : 2.55mm
    Balystik 8mm CNC steel bushing

  • Balystik 8mm CNC Low profile steel bushing

    Low profile bushings have the advantage of not protruding from the gearbox shell, this allows the selector plate to slide smoothly and not force on the growth created by standard size bushings / bearings. In addition, this allows the insertion of the motor grip without bumping it into the bushing / bearing of the bevel gear. with a thickness of 0.55mm on the rim, shimming is greatly facilitated.

    • Essential part for upgrading your Airsoft AEG
    • Suitable for 8mm AEG gearbox Tokyo Marui and clones
    • Made of steel with CNC process
    • Exceptional stability and durability
    • height : 2mm
    • Easy shimming
    Balystik 8mm CNC Low profile steel bushing

  • FPS Softair 8mm self-lubricating CNC steel bushings (B8PA)

    FPS Softair 8mm self-lubricating CNC steel bushings (B8PA)

  • FPS Softair Open Steel Bearings bushings 8mm

    Open Steel Bearings Bushings 8 mm (B8CA). The adoption of these bushings decreases the friction due to the rotation of the gears. This advantage results in both a higher burst speed, that a better use of the energy contained in the battery. The open bearing ensures higher strength compared to the closed because the ball bearings that compose it are of larger dimensions. Another advantage of these bushings is the minimum thickness that does not interfere with selector plate and body of the rifles.

    The dimensions are:

    - outer diameter: 8 mm
    - inner hole: 3 mm
    - tickness: 2.5 mm

    100% MADE IN ITALY

    FPS Softair Open Steel Bearings bushings 8mm

  • FPS Softair Steel Bearings bushings 8mm extreme mechanical stress (B8CAPLUS)

    Open Steel Bearings Bushings 8 mm ready for extreme mechanical stress (B8CA+). The adoption of these bushings decreases the friction due to the rotation of the gears. This advantage results in both a higher burst speed than a better use of the energy contained in the battery. The open bearing ensures higher strength compared to the closed because the ball bearings that compose it are of larger dimensions. Another advantage of these bushings is the minimum thickness that does not interfere with selector plate and body of the rifles.

    The dimensions are:

    • Outer diameter: 8 mm
    • Inner hole: 3 mm
    • Tickness: 2.5 mm

    100% MADE IN ITALY

    FPS Softair Steel Bearings bushings 8mm extreme mechanical stress (B8CAPLUS)

This part will be assembled and tested

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    7,42 €
  • Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    7,42 €
  • Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    7,42 €
  • Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    7,42 €
  • Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 50 Degree (green)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    8,25 €
  • Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 60 Degree (yellow)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    8,25 €
  • Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 70 Degree (blue)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    8,25 €
  • Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 75 Degree (pink)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    8,25 €
  • Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    If your hop-up adjustment is not having a big effect on the hop-up of your BBs, then it probably means that your hop-up packing is worn down and is not gripping the BB properly before it is fired out. A new hop-up packing will allow more accurate hop-up adjustments. Tested and approved by RedWolf. Best used on guns that shoot below 400fps.

    10,75 €
    Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    10,75 €
  • Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.25 BBs or more

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    12,42 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    12,42 €
  • Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.2 BBs

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    11,58 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    11,58 €
  • Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    Maple Leaf Super Macaron is aspecial developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)

    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    8,25 €
  • Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    8,25 €
  • Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    8,25 €
  • Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    8,25 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • ASG CNC short-stroke trigger, Scorpion EVO 3 - A1

    This metal short-stroke trigger is CNC machined from a single block of high strength aluminum.
    This trigger will create an extremely fast and crisp trigger pull.
    The EVO 3 A1 is born with an electronically controlled gear box, with an electronic switch allowing this short-stroke trigger to be a drop-in installation, without any modifications.
    Easy to install CNC machined High strength aluminum

    31,58 €
    ASG CNC short-stroke trigger, Scorpion EVO 3 - A1

    31,58 €
  • ASG CNC short-stroke trigger for Scorpion EVO 3 - A1 - Black

    This metal short-stroke trigger is CNC machined from a single block of high strength aluminum.
    This trigger will create an extremely fast and crisp trigger pull.
    The EVO 3 A1 is born with an electronically controlled gear box, with an electronic switch allowing this short-stroke trigger to be a drop-in installation, without any modifications.
    Easy to install CNC machined High strength aluminum

    29,92 €
    ASG CNC short-stroke trigger for Scorpion EVO 3 - A1 - Black

    29,92 €
  • Maxx Model CNC Advanced Speed Trigger Style B black for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style B black for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style B blue for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style B blue for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style B gold for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style B gold for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style B red for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style B red for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style B titan for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style B titan for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style D black for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style D black for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style D blue for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style D blue for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style D gold for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style D gold for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style D red for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style D red for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style D titan for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style D titan for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style E black for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style E black for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style E blue for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style E blue for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style E gold for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style E gold for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style E red for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style E red for Scorpion EVO-3

    27,42 €
  • Maxx Model CNC Advanced Speed Trigger Style E titan for Scorpion EVO-3

    • CNC Aluminum Advanced Speed Trigger for EVO-3 is specially designed for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles.
    • The Advanced Speed Trigger is designed with a removable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board.
    • The Advanced Speed Trigger is completely compatible with stock trigger setting without the speed trigger plate.
    • The main pivot pin of the trigger is made from Stainless Steel for maximum strength and durability.
    • The trigger spring extension is carefully insulated to prevent short circuit to controller board.
    • The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum.
    • The Aluminum and Stainless Steel construction makes this trigger very strong and durable.
    • Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip.
    • With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

       

       Includes
      product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
      product_right_arrow.png1 x Speed Trigger Plate
      product_right_arrow.png1 x Screw
      product_right_arrow.png3 x Rubber Pad
      product_right_arrow.png1 x Stainless Steel Pivot Pin
      product_right_arrow.png1 x Steel Trigger Spring
      product_right_arrow.png1 x Insulated Tube

       

       Specification
      product_right_arrow.pngOverall Length: 37mm
      product_right_arrow.pngOverall Width: 17.5mm
      product_right_arrow.pngPivot Pin Diameter: 3mm
      product_right_arrow.pngMaterial: Stainless Steel/Aluminum 6061

       

       Features
      product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
      product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles
      product_right_arrow.pngRemovable speed trigger plate to shorten trigger pull and prevent over-pull damage to electronic switch on controller board
      product_right_arrow.pngCompatible with stock trigger setting without the speed trigger plate
      product_right_arrow.pngStainless Steel Pivot Pin for maximum strength and durability
      product_right_arrow.pngInsulated trigger spring extension to prevent short circuit to controller board
      product_right_arrow.pngAluminum and Stainless Steel construction, very strong and durable
      product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
      product_right_arrow.pngUnique shapes, stylish design and colors

       

       Weight
      product_right_arrow.pngN/A grams

       

       Usage
      product_right_arrow.pngUsed for the ASG 2018 CZ Scorpion EVO-3 A1 Airsoft Rifles

       

       Requires
      product_right_arrow.pngWearing eye protection is recommended
      product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
      product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

       

       Instruction
      product_right_arrow.pngInstruction Manuals are included
    27,42 €
    Maxx Model CNC Advanced Speed Trigger Style E titan for Scorpion EVO-3

    27,42 €

The ASG Scorpion have already an ETU / mosfet system but you can choose a most advanced one

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • JEFFTRON Leviathan Bluetooth Mosfet for ASG Scorpion

    Leviathan - EVO3 is processor controlled mosfet with wireless communication. It adds new shooting modes, controls RoF, pre-cocking, active braking, low battery indication, statistics... Everything is controlled via application in the smart phone (iOS and Android). Device is fully integrated inside the gearbox version ASG EVO 3 A1 instead of the original electronics. It keeps all functions as original electronics - empty magazine detection, bolt catch, burst fire, battery undervoltage protection,...
    Comes with completely made wires to the front with deanT connector - no soldering needed.

    MAIN FUNCTIONS:

    • Adds new shooting modes independent for every position on the fire selector (SEMI - BURST - AUTO)
    • Three adjustable bursts (range 2 - 20 shots)
    • Rate of fire can be reduce to 40%. It add breaks between shots to reduce RoF. It gives fast trigger response even with very low rate of fire, just like in a real gun
    • In the package is included ARL mode set to make anti reverse latch which allows to use pre-cocking, lower level active braking and DSG gears
    • Adjustable strength active braking (can be disabled with installed ARL mode)
    • Pre-cocking function for instant shot on SEMI fire (can be used only with installed ARL mode)
    • Bolt catch lever has to be pulled after battery connection, which simulates load the bullet into the barrel like in the real gun
    • Emply magazine sound indication and bolt catch lever can be deactived in the app
    • Delay between shots adds time in which isn't possible to shoot, it simulates the delay from gun reload or recoil (range 0,1 - 4,0 seconds)
    • Electronic fuse set sensitivity for high current detection to avoid any damage if something goes wrong
    • Low battery indication for 2S - 4S li-pol and 3S - 4S li-fe
    • Statistics screen shows shooting output with cycle timing, motor current consumption, rate of fire and mosfet temperature. It allows you to do fine-tune gearbox upgrade
    • Application shows actual battery voltage value. Color lines indicates battery charge status
    • User can save multiple settings under profiles
    • Update function fixes bugs and adds new features to the device
    • There are three shot counters. Total count every shot during the device lifetime. User counter can be reset by user anytime. Power-up counter is reset by battery connection
    • Error log shows errors made during the device life
    • For better security wireless connection can be disable by the selector switch (can be deactivated)
    • Leviathan - EVO 3 monitors current, voltage and temperature to avoid any damage when something go wrong.
    • Motor vibrates and beeps as a feedback for user
    • Programmed settings are saved in the Leviathan - EVO 3 memory immediately after their change, so settings aren't lost when is battery disconnected or lost connection with smartphone

    FIRE MODES:

    Independent for every position on the fire selector (SEMI - BURST - AUTO)

    • SAFE: no responding on the trigger pull.
    • Semi: it fires single shot per trigger pull.
    • Semi/BurstX: short trigger pull fires single shot, long trigger pull fires burst.
    • Binary trigger: it fires single shot when trigger is pulled and another single shot when is released.
    • BurstX: gun shoot burst per trigger pull.
    • BurstX+BurstY: short trigger press fires burstX, long trigger press makes burstX+burstY fire.
    • BurstX/Full: short trigger press fires burstX, long trigger press makes auto fire.
    • Full: gun makes auto fire until releasing trigger.

    TECHNICAL SPECIFICATIONS:

    • Easy installation inside the gearbox version ASG EVO 3 A1
    • No modifications is needed in the gun or Leviathan - EVO3
    • Compatible with Scorpion EVO 3 - A1, Scorpion EVO 3 - A1 B.E.T., Scorpion EVO 3 - A1 carbine with gearbox gen.1, version 2018 and version 2020
      Compatible with stock and CNC trigger
    • Installation ARL Mode: with anti reverse latch you can use precocking, lower level active brake and DSG gears
    • It uses micro switch actuated by sector gear for perfect semi and burst fire timing
    • Thanks to advanced electronics, Leviathan - EVO 3 can be used with any common gearbox upgrade and gun rate of fire
    • Completely made wiring allows the fastest and the easiest installation into the gun, it is long enough for all kind of weapons with battery placed in the front. No soldering is needed
    • There are high quality wires 1,5 qmm (AWG16) with thin and hard MPPE insulation
    • Wire outer diameter is only 2,06 mm
    • Board is covered by conformal coating, it protect Leviathan - EVO3 against water
    • Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
    • Device increases gun rate of fire and battery holds longer, than with basic wiring
    • With active braking ON piston isn't partially stretched, spring is fully released, parts in mechabox aren't under strain and nozzle locks hop-up chamber in greater part (depends on ROF)
    • In weapons with very high rate of fire (ROF) active brake solves multiple shots in semi mode
    • The braking effect is the most powerful with high torque motor
    • Remove from the gearbox: cut off lever, stock electronic, you will not need them with the Leviathan - EVO 3

    LINKS:

    PACKING:

    • Leviathan - EVO3 drop-in electronic module with wiring to front, DeanT connector
    • ARL Mode: Anti reverse latch, spring and special screw
    • Two plastic washers under screw for securing device in the gearbox
    • Black Leviathan sticker 40 mm
    • Foam to keep device in place
    • Installation manual in English

    SAFETY WARNING:

    • Installation of this device into the gearbox requires advanced technician skills!
    • Please read these informations before installing your device to prevent any damage.
    • Short circuit or incorrectly connected battery will cause immediate damage to the device which is not covered by the warranty. It can lead to fire or even battery explosion.
    • Disconnect battery, when you aren't using the gun! Otherwise you will fully discharge the battery. Because the device drains small amount of current from the bettery all the time.
    • Don't connect battery when gun pointing towards you, another person or an animal.
    • Don't modify, repair and put into any kind of liquids or thermal shock the Leviathan - EVO3.

    83,25 €
    JEFFTRON Leviathan Bluetooth Mosfet for ASG Scorpion

    83,25 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Option No.1 Motor Brushless Hi-torque short plug-in

    The OptionNo.1 brand unveilsa brand new Hi-torque axe short Brushless motor that will allow you to upgrade your AEG replica. The special features of the Brushless motor allow you to benefit from impressive performance while reducing electrical consumption and removing the constraints of a conventional carbon motor.

    This motor is suitable for all mosfets! * see table below

    option-no1-moteur-brushless-hi-torque-lo

    • Increased response time compared to a conventional engine
    • Power consumption down
    • Operation by magnetic field
    • No motor brushes
    • Heats much less than a conventional engine
    • More torque
    • No mechanical and electrical loss
    • High performance
    • Plug-in design simple to install
    • 7.4V 31000 rpm LiPo battery
    • LiPo 11.1v 46000 rpm battery
    • Low voltage protection
    • Overheating protection
    • 100 Protection temperature protection
    108,25 €
    Option No.1 Motor Brushless Hi-torque short plug-in

    108,25 €
  • Guarder Infinite Torque-Up motor - Short Type

    Guarder Infinite Torque-Up Type Motor :

    Two Ball Bearing Bushing Inside
    Guarder Motor Pinion Gear (Thermal Treatment)

    40,75 €
    Guarder Infinite Torque-Up motor - Short Type

    40,75 €
  • Nimrod NT Blackbird 20K CNC Motor Short axis

    The Blackbird 20K series is built with solid materials and is suitable for every setup. Due to the high TPA (Turns Per Armature) it can easily pull up all of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 20000
    • TPA: 26
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 18:1 / 16:1 / 13:1 / 12:1
    • Springs : all
    56,58 €
    Nimrod NT Blackbird 20K CNC Motor Short axis

    56,58 €
  • Nimrod NT Blackbird 26K CNC Motor Short axis

    The Blackbird 26K series is built with solid materials and is suitable for nearly every setup. Due to the high TPA (Turns Per Armature) it can easily pull up all kinds of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 26000
    • TPA: 19
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1 / 16:1 / 13:1 / 12:1
    • Springs : M110+
    56,58 €
    Nimrod NT Blackbird 26K CNC Motor Short axis

    56,58 €
  • Nimrod NT Blackbird 30K CNC Motor Short axis

    The Blackbird 30K series is built with solid materials and is suitable for nearly every setup. Due to the high TPA (Turns Per Armature) it can easily pull up most of of springs available for AEGs. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 30000
    • TPA: 16
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1 / 16:1 / 13:1
    • Springs : M100-M150
    58,25 €
    Nimrod NT Blackbird 30K CNC Motor Short axis

    58,25 €
  • Nimrod NT Blackbird 39K CNC Motor Short axis

    The Blackbird 39K series is built with solid materials and is suitable for nearly every setup. Due to the high rpm, it also can be used in short stroked 0.5 Joules or under 1 Joule builds. Take care of the spring and sector gear management to prevent a pre interlocking which will cause a broken piston or sector gear. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 39000
    • TPA: 14
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1 / 16:1
    • Springs : M100 to M140
    56,58 €
    Nimrod NT Blackbird 39K CNC Motor Short axis

    56,58 €
  • Nimrod NT Blackbird 45K CNC Motor Short axis

    The Blackbird 45K series is built with solid materials and is suitable for nearly every setup. Due to the high rpm, it also can be used in short stroked 0.5 Joules or under 1 Joule builds. Take care of the spring and sector gear management to prevent a pre interlocking which will cause a broken piston or sector gear. Our magnets can withstand high temperatures up to 150°C and the armature is equipped with a cooling system as well as 0.8mm wires. The cooling port near the end bell does provide impactful cooling without risking damaging the motor if any internals fail. The CNC machined end bell also does provide better cooling and better fit and endurance of the bearings inside the motor. The pinion gear is made of strong MIM technology material and with D-shape fitting, it is easy to change if you need to. It also provides a better force translation than O-shaped pinion gears.

    • U/min @ 11.1V: 45000
    • TPA: 11
    • Pinion Gear Shape: D-Shape

    We do recommend using it in the following setups

    • Gearset : 32:1 / 18:1
    • Springs : M100 to M130
    56,58 €
    Nimrod NT Blackbird 45K CNC Motor Short axis

    56,58 €
  • Nimrod NT Blackbird 36K/27K CNC Brushless Motor short

    The Nimrod Tactical Brushless motor has 2 adjustable speed settings. Depending on the battery being used, either 27000 rpm or 36000 rpm can be set. Same as with the regular Nimrod motors, a D-shape pinion gear is used. Thus the power transmission is better and the change of the bevel gear is easier. The motor should only be used in conjunction with strong batteries. The C rating must necessarily be above 40 / 60. Also, the battery should have a high capacity (1400 mAh or more) to operate smoothly. The motor has been successfully tested with a variety of mosfets available on the market and it can be reported that all tested combinations worked well together.

    Please note that some Mosfet manufacturers cannot guarantee that operation with a brushless motor is possible. In this regard, always refer to the Mosfet manufacturer’s specifications. To ensure a trouble-free installation, the pinion to bevel gear position must be considered. Some grips and motor covers need to be modified to allow a perfect fit of the motor.

    149,92 €
    Nimrod NT Blackbird 36K/27K CNC Brushless Motor short

    149,92 €
  • SHS high torque motor short axis

    The SHS high-torque motor is an affordable, high quality AEG motor that has been enhanced for high torque output. Well known from every gunsmith for several years, it is an essential base for upgrading your replica, especially since its price / performance ratio is unbeatable.

    Features :

    • Steel pinion gear
    • Neodym magnets
    • 16 TPA
    • Excellent ROF and responsiveness
    • Short axis version
    29,08 €
    SHS high torque motor short axis

    29,08 €
  • G&G Talaria 40K Motor Short Axis

    • High-Performance Motor
    • Compatible to up to 12v Batteries
    • Designed for AEG
    • Shaft : short
    • Magnets: Neodymium
    • Maximum speed: 40000rpm
    66,66 €
    G&G Talaria 40K Motor Short Axis

    66,66 €
  • Warhead BASE Brushless motor 27K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 27,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    120,75 €
    Warhead BASE Brushless motor 27K short axis

    120,75 €
  • Warhead BASE Brushless motor 35K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 35,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    124,92 €
    Warhead BASE Brushless motor 35K short axis

    124,92 €
  • Warhead Motor Brushless HIGH speed 36K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    • High quality 7075 aluminum housing
    • Totally customized design with maximum power and torque
    • High temperature resistant quality copper winding
    • High quality magnets
    • Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    • High precision CNC design
    • High quality "D" insert for motor gear
    • Compatibility: AEG using short axis motors

    Information: 25,000 rpm in 7.4 v Lipo - 36,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    155,75 €
    Warhead Motor Brushless HIGH speed 36K short axis

    155,75 €
  • Warhead BASE Brushless motor 45K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 45,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    124,92 €
    Warhead BASE Brushless motor 45K short axis

    124,92 €
  • Warhead Motor Brushless ULTRAHIGH speed 52K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    • High quality 7075 aluminum housing
    • Totally customized design with maximum power and torque
    • High temperature resistant quality copper winding
    • High quality magnets
    • Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    • High precision CNC design
    • High quality "D" insert for motor gear
    • Compatibility: AEG using short axis motors

    Information: 35,000 rpm in 7.4 v Lipo - 52,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    149,92 €
    Warhead Motor Brushless ULTRAHIGH speed 52K short axis

    149,92 €

This part will be assembled and tested with your custom replica, we can add the Airtech Studios hop-up wheel to the stock chamber or you can choose the ASG CNC hop-up unit

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Airtech Studios Enhanced Hop Up Gear for Scorpion EVO Series

    The Airtech Studio EHG (Enhanced Hop Up Adjustment Gear) for the Scorpion EVO3 line of AEGs is an upgrade part over the stock gear found in the out of the box gun.

    Compatibility:

    • Scorpion EVO3A1
    • Scorpion EVO3A1 Carbine
    • Scorpion EVO3A1 Carbine B.E.T.
    9,99 €
    Airtech Studios Enhanced Hop Up Gear for Scorpion EVO Series

    9,99 €
  • ASG Ultimate EVO CNC Performance Hop Up

    ActionSportGames are proud to present the Ultimate EVO CNC Performance Hop Up. A unique design created to enhance the performance of all models within the EVO family.Constructed from a single piece of aerospace grade aluminium this revolutionary new hop up offers optimized range and accuracy. Suitable for all BB weights and fully compatible with aftermarket hop up rubbers the this CNC’d unit features a fully customisable stepless hop up adjustment with laser engraved increments allowing you to easily record the most effective setting for your EVO.
    Easy to install in minutes, this essential upgrade allows you to perfectly tailor the hop setting to your individual EVO and will even improve ‘flat hop’ and ‘r hop’ installations.Like all of our EVO components the Ultimate EVO CNC Performance Hop Up is designed, developed and manufactured in Denmark to the highest standards, resulting in a high quality finish and a  flawless shooting experience with a longer range and tighter grouping  for the airsoft skirmisher or target shooting enthusiast
     
    Features:
    • New Generation of hop up design and performance “EVOlution”. Designed and Made in Denmark.
    • Fully compatible with all hop-up rubbers and BB weights in the market.
    • Hop up Chamber CNC machined out of a single piece of aerospace aluminum.
    • Fully customizable hop up engagement point.
    • Compatible with both AEG and HPA.
    • Stepless hop up adjustment.
    • Easy detection of hop up position with laser engraved hop up adjustment wheel.
    • Virtually unlimited fine adjustment possibilities for ultimate adaptability and precision performance.
    • Easy installation, can be assembled and installed in minutes – Contains only 1 screw.
    • Engineered to improve the performance of flathop and R-hop solutions straight out of the box.
    • New additional adjustment hex bolt to fine tune the fit between the Hop-Up bucking and gearbox nozzle.
    76,58 €
    ASG Ultimate EVO CNC Performance Hop Up

    76,58 €

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

This SCORPION EVO 3 has been upgraded in our workshop.
Preparation :

  •     Unmount of the original airsoft gun
  •     Open the gearbox, take off everything inside, cleaning & degreasing shells
  •     Replacement of internal components
  •     Adjusting the new gears with inox shims, one by one
  •     Custom anti reversal for bevel gear
  •     Modification of the gearbox for setting an anti reversal for the bevel gear
  •     Angle of engagement optimisation (AOE)
  •     Short Stroke Of the Sector gear and Piston
  •     Shorten the original trigger course by 70% included in the custom replica
  •     Greasing with pencil
  •     Firing tests
You can check the result of the modification in the video below.

Caracteristics :
  •     12 month warranty
  •     Comes with ASG Scorpion 75 rds magazine.
  •     Doesn't come with lipo battery : Recommended battery is IPOWER 11.1V 1200mah

With many years of experience, our team now offers fully upgraded AEGs. The airsoft guns are unmounted, improved, reinforced and tested both mecanic and trajectory. We change only the necessary by selecting reinforced parts that will give longevity and performance. The goal is to get a reliable airsoft gun and in the same time use 11.1v lipo batteries with confidence and high response cycle. Please contact us if you need any variant of this custom gun tuned to your needs.

Data sheet

TypeScorpion
Caliber6mm Airsoft
MaterialPolymer
Hop-upAdjustable
Firing modeSelectable
Attachment SystemPicatinny rail
Power sourceElectric
Gearbox inserts8mm Bearings
Gear ratioSelectable
Quick change spring GearboxYes
Integrated MosfetSelectable
Trigger SystemElectronic
Magazine VersionMid-cap Spring operated
Magazine capacity75
BatteryNot Included
Battery chargerNot Included
Battery ConnectorDEAN (T-Plug)
Power (FPS @ 0.20gr)Selectable

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Accessories

Mosfet

Here is a sum-up list of the available mosfets for our custom AEG airsoft guns. Note that you may see or not see this options following the Custom replica.

Important note : With a high performance mosfet configuration, for each shot fired the motor is instantly launched and instantly stopped, wich mean the more you shoot fast with a lot of quantity shot in few timing, the motor is heating accordingly, this is normal, but too much is not advised. Our products are made to get a very responsive semi automatic and make short full auto. If you wish to fire a lot of BBs in during a short timing (speedQB, Machine gun), we strongly advice to get HPA system more suitable.

The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade Economic version with limited number of functions.

 VIDEO

TITAN V2 Advanced Set is an AEG Control System for V2 gearboxes which will transform your airsoft gun into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. TITAN V2 enables you to adjust the trigger sensitivity with military precision. The innovative proximity trigger sensor offers you even 250 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions.

 VIDEO

Leviathan - V2 is processor controlled mosfet with Bluetooth communication. It adds new shooting modes, controls RoF, pre-cocking, active braking, low battery indication, statistics... Everything is controlled via application in the smart phone (iOS and Android). Device is fully integrated inside the gearbox version 2 instead of the original trigger contacts. Comes with completely made wires to stock with 30A mini fuse and deanT connector - no soldering needed.

VIDEO 

This option feature a modified Gate TITAN module combined with ICFU System (Integrated Custom Firestop Upgrade) : the system makes stop firing the replica when there is no BB left in the magazine, just like a PTW !

  • Stop BBs when magazine is empty
  • Gate Titan integrated mosfet
  • No bolt stop system necessary to resume fire
  • ICFU requires special magazine, not possible to use regular M4 AEG Magazine
  • Please never update the Firware, that would delete the ICFU fonction permently

 VIDEO ICFU Magazine

This option feature a modified Jefftron Leviathan module combined with ICFU System (Integrated Custom Firestop Upgrade) : the system makes stop firing the replica when there is no BB left in the magazine, just like a PTW !

  • Stop BBs when magazine is empty
  • Jefftron Leviathan integrated mosfet
  • No bolt stop system necessary to resume fire
  • ICFU requires special magazine, not possible to use regular M4 AEG Magazine
  • Please never update the Firware, that would delete the ICFU fonction permently

 VIDEO  ICFU Magazine

Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

Videos

Questions  (2)

A partir de antonin | 2019-03-09 09:07:15

Bonjour est il possible d'effectuer ce travail sur une réplique que je possède?

Cordialement,

Powair6

Bonjour, C'est tout a fait réalisable sur une réplique que vous possédez, n’hésitez pas a nous contacter par e-mail ou téléphone pour cela ! Cdt

A partir de Jeremy | 2019-02-15 19:21:49

Peux t-on la commander en high toque ?

Powair6

Oui c'est tout a fait possible mais la préparation diffère sensiblement a cause notamment du ratio des engrenages mais le prix reste identique. Contactez nous par e-mail ou téléphone pour confirmation avant de placer votre commande. Cdt

Page: 1
Seuls les utilisateurs enregistrés peuvent poser une question. Login