The US Special Operations Command(US SOCOM) issued a solicitation for the procurement of SOF Combat Assault Rifles (SCAR)on October 15th, 2003. This solicitation requested a new combat rifle, specially tailored for the current and proposed future needs of the US Special Forces, which are somewhat different from then current US Army requirements, which were being fulfilled (unsuccessfully) by the newest Heckler-Koch XM8 assault rifle. The key difference in basic requirements between XM8 and SCAR was that, while XM8 was a single-caliber weapon system, tailored for 5.56x45mm NATO ammunition, the SCAR would be available in various different calibers. Initial SOF requirements included two basic versions of SCAR system - the SCAR Light (SCAR-L), available in 5.56mm NATO, and the SCAR heavy (SCAR-H), which should be initially available in significantly more powerful 7.62x51 NATO chambering, and should be easily adaptable in the field to other chamberings (this still is not the case).The key idea of SCAR rifle system is that it will provide the Special Forces operators with wide variety of options, from short-barreled 5.56mm SCAR-L CQC variation, tailored for urban close combat, and up to long range 7.62x51 SCAR-H Sniper variant. Both SCAR-L and SCAR-H are available in three basic versions, Standard(S), Close Quarters Combat (CQC) and Long Barrel (LB). All these variants, regardless the caliber and exact configuration, will provide the operator with the same controls layout, same handling and maintenance procedures, and same optional equipment, such as sights,scopes, andother current and future attachments.
In the beautiful FN two tone tan color, the upper receiver is made in metal with a anodized finish and paired with a weight lightening polymer lower receiver. Inside is a gas blowback system that gives a better kick than the other SCAR-H GBBs out there in the market. .
The upper receiver features a 13 inch carbine length barrel with the AAC type flash hider and have rails on all 4 sides, that gives great flexibility to fulfill with mission requirements, no matter it's laser designators, flashlights, fore grips, backup sights you will find enough space to fit them all on if required so. Hop up adjustment is located behind the lower rail, adjustable with flat head screw drivers. Charging handle is reciprocating, and could be changed to either side tailored to user's preference. Iron sights are flip up 600m type with windage and elevation adjustments. .
In the lower receiver features a pistol grip that is interchangeable with other M4 GBB grips in the market. The lower receiver also have ambidextrous magazine release and ambidextrous fire selector with the bolt release on the left. The buttstock is the most iconic feature of the SCAR series that is foldable, 6 position retractable and have an adjustable cheekrest. .
With the strong kick, reliable gas system and the SCAR platform makes this gun both fun and deadly as a DMR platform.
|Firing mode||Semi + Full automatic|
|Material||Polymer / Metal|
|Main color||Dark Earth|
|Thread type||14mm CCW|
|Inner Barrel dia (mm)||6.03|
|Magazine Version||Mid cap spring operated|
|Power (FPS @ 0.20gr)||390ps|
The power of gas replicas is a point of reference only, it does not constitute a guarantee of results but an estimation made by the manufacturer. Please take this information into account before purchasing, no warranty service regarding the power can be applied. The power advertised for gas replicas can be highly variable because the cooling of the tank linked to rapid fire, pressure / type of gas used and winter conditions, it is possible to empty all the gas quickly from a magazine, and if there is not enough time given to convert the liquid part into gas, the liquid form then rises through the nozzle as a white cloud. Be sure to use your equipment on suitable climatic conditions and adapt your rate of fire to the ambient temperature to avoid that effect. We recommend that you always choose the manufacturer's brand spare magazines. Choosing a different brand may generate a different power from the original as the percussion valve and magazine lips are not the same.
This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:
* Never point or shoot at a person, animal or any other object representing any danger.
* Do not aim with your replica until you are ready to shoot at the target you have selected.
* Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
* Do not aim the shot at the eyes or ears.
* Do not use airsoft without wearing goggles or a protective mask.
* Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
* Always be sure to keep the safety “ON” when you are no longer using the product.
* Never look into the barrel, a BB may be hurt your eyes.
Does the rifle have a built in npas to lower fps?
Hello , yes .
Vous attendez-vous à avoir cette réplique bientôt?
CYBERGUN VFC FN SCAR H GBBR - TAN
Nous n'avons pas de date de réapprovisionnement pour ce produit, il n'est pas non plus possible de le précommander.
Nous vous recommandons de créer une alerte e-mail sur la page produit, vous serez prévenu instantanément dès son retour !
Hey, does it have the "F" for legally use in germany?
Hi, no F marking on this replica
Je souhaiterai savoir quel canon et quel joint hop up peuvent être installés dessus.
Est ce qu'il existe des pièces de rechange ( nozzle, détente, bloque hop up et toute pièces d'usure interne) pour cette réplique.
je vous remercie par avance de vos réponses,
À notre connaissance il n'existe pas de pièces détachées "custom" de remplacement sur le marché. Néanmoins la garantie assurée par Cybergun vous protège de tous les vices cachés et les pièces sont disponibles. En ce qui concerne le canon vous pouvez utiliser des modèles avec une embase de type VSR, idem pour le joint hopup. cdt