P6 VFC MP7A1 H&K HPA Polarstar F2

P6-HPA-MP7-26393X

New product

Out of stock - No date of restock

Moyenne des votes pour ce produit
0 / 5
Moyenne : 0 / 5
Basée sur 0 avis clients.

1 258,25 € tax excl.

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • EU Version

    EU Version

  • US Version

    US Version

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

This is the VFC MP7A1 H&K AEG tuned in HPA by our workshop. The replica is powered by one of the best drop in system available, the Polarstar F2. The gearbox has been entirely milled and wiring modifications has been made to keep all the actual fonctions of the original AEG.

Feature :

  • Polarstar F2 powered with dual solenoid system
  • Polarstar FCU Rev3 located in the handguard
  • Maple leaf hop-up rubber
  • MP7A1 HPA laser markings with unique serial number
  • Mp7 does not fire when no magazine inserted + empty magazine detection
  • Full ambidextrous controls keeped

Inside the box :

  • MP7A1 HPA with Polarstar F2
  • Polarstar FCU Rev3
  • 7.4v 180mah lipo battery
  • 110 round magazine
  • P6 Workshop Patch
  • Choose the end connector (EU or US) in the dropdown menu

Power :

  • FPS at 70 psi : 270 FPS
  • FPS at 150 psi : 360 FPS

Update 17/09/2021 : 

  • Short trigger mod with a micro switch fiitted, it gives less course and a sharp stop, nice trigger feel guaranted !
  • Modification of the hop-up chamber, we have imagined an easier and safer hop up system setting to prevent the "side spin" effect (trajectory going to the left or to the right). We have chosen to remove the dial on the side and make a vertical adjustment with 2 screws (TDC). This solution allow to press perfectly and uniform on the bucking, the settings are also much more precise than with the original dial system. Be careful, however, to not tighten the aim fully as this could damage the unit. How it works ? TDC allow you to adjust the BB trajectory with 2 screws that push on each side of the hop-up rubber. By screwing you increase the hopup effect, by unscrewing you reduce it. Example: your bb go to the right and upwards, you have to unscrew the screw on the right. Your bbs goes down to the left, you need to tighten the left screw.

61355.jpg?time=1610549332685

Important note :

  • The final replica is tested with 600 rounds aprox to provide you the best experience out of the box.
  • Please do not try to unmount the internals otherwise it will immediatly cancel the warranty.
  • FCU and battery will be covered in black color for not being seen from the holes of the handguard
  • FCU is already programmed, access is hard, please do not try to make changes, all works like a charm, just plug the battery and play :)
  • The stock cannot be retracted completly at the end due to the HPA hose blocking, we will create a new step to block the stock before touching the hose.
  • Use only High quality BBs like ASG, Tippmann, G&G, Krytac, BLS : all claims due to BB blocked inside the gun won't be taken in warranty.
  • Original AEG internal parts are not included
  • Don't feed your mid cap magazine more than 80% of the maximal capacity
  • We strongly advice you to use high performance BBs such as BLS, Krytac, Madbull ASG blaster Devil or open Blaster.
  • Never use grease or any silicone on the electric gun, magazine or BBs.
  • There is a very important operating tip please users notice carefully. The MP7 AEG magazine comes with a new swing-able follower, which could fits bullets tunnel much freely that we can make more capacities in the MP7 AEG mags. However the new follower will goes out from magazine once the ammos ran dry, if you need to insert the empty mag into receiver for some reasons (storage, photo taking...etc.), Please remember PUSH DOWN THE FOLLOWER FIRST, because the follower tip may tilt to side and bump your hop-up port, Please check it's locked inside mag by retainer before insert.

Data sheet

TypeSMG
Caliber6mm Airsoft
HPA SystemPolarstar F2
Lenght (mm)380
Weight1720gr
MaterialPolymer
Main colorBlack
Thread type12mm CW
Hop-upAdjustable
Firing modeSemi + Full automatic
Power sourceHPA
Inner barrel (mm)200
Inner Barrel dia (mm)6.03
Magazine VersionMid-cap Spring operated
Magazine capacity110
BatteryIncluded
Battery voltage7.4V
Battery ConnectorJST
Power (FPS @ 0.20gr)260 - 360 FPS

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Accessories

Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

Videos

Questions  (1)

A partir de Antonio F | 2019-12-02 23:36:11

Es posible tener un recorrido de gatillo más corto?

Powair6

Hola, no es possible. Un saludo

Page: 1
Seuls les utilisateurs enregistrés peuvent poser une question. Login