Powair6 si proud to introduce the Ares Honey Badger with a Polarstar Fusion Engine fitted.
- Polarstar Fusion Engine fitted with all the internals modifications
- Macroline exits rear side on the stock
- Firing tests to control working, range and accuracy
We can also configure and add special upgrade and accessories to your airsoft gun :
- Add RIS, GRIPS, silencers, etc .., we will mount it for you
- Add any type of parts such as rubber, hop-up unit, inner barrels (can be cutted to the exact length of the gun)
- Laser markings if you want ! on the body, dust cover or any aluminum/steel surface available, it is also free!
For this options or if you have any questions, do not hesitate to contact us by phone 0033-534278810 or firstname.lastname@example.org
The Redline SR-E Lightning is a Patent Pending HPA drop in cylinder replacement. The Lightning is not just another cylinder replacement engine. It uses only a single solenoid, has a forward biased nozzle and fires from a true closed bolt. Due to its true closed bolt design the Lightning is much more consistent in seating the BB in the bucking from shot to shot when compared to a typical open bolt HPA engine. The result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range when compared to open bolt HPA engines. A unique feature of the Lightning is that it uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the Lightning fills an internal air chamber at the pressure set by the users external supply regulator. When fired, this air chamber is mechanically sealed off from the supply and the chambers contents is released down the barrel to propel the BB. This feature contributes to the Lightnings excellent shot to shot consistency, with no air wasted do to improper dwell settings. The Lightning is also super simple to set up. Since there is no poppet dwell to tune you just set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot regardless of BB weight, barrel length or any other factor is all that is released.
The Hurricane is the flagship of our new SR line of engines. The SR-M Hurricane is an evolution of the now famous N7 Milsim. Both engines being semi only, closed bolt mechanical- pneumatic drop-in HPA engines. Although the Hurricane shares no parts with the N7 Milsim. The Hurricane does have the same outstanding performance and reliability that N7 Milsim owners have come know and love, with the added benefit of increased air efficiency. The fact that the Hurricane is mechanical-pneumatic means that there is no battery or FCU needed. Just plug in your regulated air source and you are good to go. That also means that even rain and snow are not a worry since there are no electronics to short or corrode. Due to its true closed bolt design, the Hurricane is much more consistent in seating the BB in the bucking from shot to shot. When compared to typical open bolt HPA engines, the result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range.A unique feature of the Hurricane is that it uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the Hurricane fills an internal chamber at the pressure set by the users external supply regulator. When fired, this air chamber is mechanically sealed off from the supply and the chambers contents released down the barrel to propel the BB. This feature contributes to the Hurricane’s excellent shot to shot consistency, with no air wasted do to improper dwell settings. The Hurricane is also super simple to set up. Since there is no FCU to tune, you just set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot regardless of BB weight, barrel length or any other factor is all that is released. Please note that the N7 Hurricane is not compatible with ICFU and Custom trigger with shortened course, do not choose those options if you want an N7 Milsim
F2 is essentially a Mini Fusion Engine. It offers the same adjustability and performance as the Fusion Engine in a cylinder sized package. Patented Dual Solenoid Design : The dual solenoid design of the F2™ provides the same functionality as the legendary Fusion Engine™ but in a more compact, efficient and flexible design. Dual solenoids allow for the nozzle and the poppet valve to be adjusted independently of each other for unparalleled control over both the loading time and air volume used. Additionally, this makes it possible to change the firing sequence giving it the ability to operate in both true closed bolt as well as "AEG" mode. Increased Efficiency : The F2™ incorporates a new one-piece, lightweight poppet valve design yet still operates on the same principle as the Fusion Engine™ poppet. This valve is able to operate at lower pressures and uses less air volume to function which optimizes air efficiency. The standard F2 poppet is equivilent to the Red Low-Flow poppet of the Fusion Engine. comes with REV3 FCU
Polarstar F1 Mini FCU & Standard FCU
The F1 is a high performance, universal HPA drop-in cylinder. Comes with REV3 FCU (led screen & joystik) or mini FCU (programmation with trigger)
Polarstar Jack Mini FCU & Standard FCU
lthough economically priced, JACK™ still retains the same performance and quality you have come to expect from PolarStar products. Comes with REV3 FCU (led screen & joystik) or mini FCU (programmation with trigger)
Wolverine Inferno Premium / Spartan / Bluetooth
The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. The GEN 2 Inferno is a HYBRID of Open Bolt and Closed Bolt technology. It takes the advantages of Open Bolt, but takes out the hassle of tuning and searching for the right hop up/bucking/barrel combinations.. Premium version comes with FCU in the stock tube, Spartan comes with FCU in the gearbox (programmation with trigger), Bluetooth comes with FCU in the stock tube & programmable with Android.
Wolverine Reaper Premium / Spartan / Bluetooth / Electro Mecanic
The Reaper is a new HPA airsoft system from Wolverine that features a true "closed bolt" firing system. The air is locked and loaded for its first shot, ready to go. Premium version comes with FCU in the stock tube, Spartan comes with FCU in the gearbox (programmation with trigger), Bluetooth comes with FCU in the stock tube & programmable with Android, Electro Mecanic comes without FCU and is semi-auto only
Polarstar Fusion Engine
the patented Fusion Engine is one of the most reliable, high performance airsoft systems available today. No matter if you need a high fire rate CQB setup or a high velocity sniper platform, the Fusion Engine can do it all without sacrificing dependability or trigger response. Comes with REV3 FCU (led screen & joystik). Please note that the Fusion Engine is not compatible with ambidextrous selector set, in the case you choose an AEG with ambidextrous selector you will get only the selector left side working, and sometimes we should be able to replace the original left selector to a CNC balystik.
Polarstar Fusion Engine + poppet mod
This modification allow to modify the original Fusion Engine to the range of power used mostly in european countries & reduce by 30 % the air consumption, also overall performances are improved. Min Power is 340 FPS & Max power is 430 FPS @ 120 PSI. FPS may change with inner barrel lenght and inner diameter. We have The lowered Original Poppet air flow by 75% and turn the original Nozzle in red Nozzle (4mm inner diameter) with our turning lathe. Please note that the Fusion Engine is not compatible with ambidextrous selector set, in the case you choose an AEG with ambidextrous selector you will get only the selector left side working, and sometimes we should be able to replace the original left selector to a CNC balystik.
Aucun avis pour le moment.
AAC Honey Badger PDW is an CAR-15 based assault rifle / PDW in caliber .300 AAC Blackout produced by Advanced Armament Corporation, a subsidiary of Freedom Group. The weapon is named after the honey badger.
Both the rifle and the caliber used were developed in close cooperation with American special operations units to create a suitable and effective replacement for the HK MP5 and similar CQB weapon systems. The rifle is designed to be very convenient for military use where the CAR-15 platform is issued and in common use, since many similarities would exist in the fire controls, weapon manipulation, and magazines.
Finally, the airsoft version has arrived. A lot of people have gone and customized their own version but ARES are the only company that have listened and set off to design the AM-014 which closely resembled the AAC Honey Badger PDW.
It fits in with their Amoeba line as their receiver hasn't changed but they've managed to add the stylish HB extendable stock, a free float hand guard and a mock suppressor protruding out the front. The hand guard is a little shorter suitable for those who prefers the gun length shorter.
It works with the ARES / Amoeba Electronic Gearbox Programmer for ARES Electronic Firing Control System Gearbox so you can set your AEG to burst fire if you prefer. The trigger response is excellent and works best with a 7.4v PEQ battery which is stored in a small compartment of the stock. It's a little fidgety, but it fits perfectly so you don't get any rattling.
|Firing mode||Semi + Full automatic|
|Inner barrel (mm)||345|
|Inner Barrel dia (mm)||6.03|
|Battery charger||Not Included|
|Battery Connector||Small Tamiya|
This service include all the the following task done in our workshop.
- Unmount of the original airsoft gun
- modification (if needed) of the original gun to fit the new HPA system
- Installation of the HPA engine including spare tapet plate if necessary
- Rear sided installation of the macroline
- Installation of any accessory such as inner barrels ... purchased with the HPA gun
- Firing tests (around 500-600 BBs) to check about the working and grouping.
- FCU optimal programmation
- Test of the regulator and the tank
- 1 year warranty
- Additionnal engravings if you need !
Aucun avis pour le moment.
Pin front and pin back body
If you want to change the trigger in your set up, we will install it for you !
Choose your HPA tank
Tanks are delivered empty
|PI approved regulator||yes|
|PI approved tank||yes|
Choose your regulator (include regulator and line)
Choose the battery model for your FCU.
This option is only available in our packs and cannot be bought separately.