- Polarstar Fusion Engine fitted with all the internals modifications
- EasyConnect system fitted on the motor grip or rear sided : no more visible macroline hose, just click & go.
- Firing tests to control working, range and accuracy
- ICFU : Gun stop firing when magazine is empty, a must have ! requires special ICFU magazines
- Custom trigger with reduced stroke : for more comfort and responsiveness
- Poppet mod : we modify the poppet and transform the blue nozzle as a red one, it is lowering air consumption
- Also classic options such as regulator, air tanks, batteries and battery charger can be chosen if you are not already equipped
We can also configure and add special upgrade and accessories to your airsoft gun :
- Add RIS, GRIPS, silencers, etc .., we will mount it for you
- Add any type of parts such as rubber, hop-up unit, inner barrels (can be cutted to the exact length of the gun)
- Laser markings if you want ! on the body, dust cover or any aluminum/steel surface available, it is also free!
For this options or if you have any questions, do not hesitate to contact us by phone 0033-534278810 or firstname.lastname@example.org
Have you ever dreamed of Polarizing your MP5, G3 or SCAR? With the introduction of the GEN3, now you can! At first glance the GEN3 FE looks very much like the GEN2 and, for the most part, the two are quite similar. However, unlike its predecessor, the FE GEN3 is no longer just for the M4/M16 series rifle. We applied the same concept used with our Version 3 Fusion Engine™ so that it is now able to interface with the selector plate and related components of your existing AEG’s gearbox.
The FE GEN3 will come complete with a trigger and steel selector plate so that it can be installed into any airsoft gun which is Tokyo Marui compatible. However, by installing a different nozzle or rifle specific conversion kit, you will be able to expand the number of rifles it will be compatible with. In most cases all you’ll need to do is change out the trigger and selector components with ones from your AEG, install a different Fusion Engine™ nozzle, and the engine is ready to use in a completely different model of rifle.
The internal operation of the Fusion Engine cylinder assembly are exactly the same and share many of the same parts, so it offers the same stellar downrange performance and rock solid reliability as its predecessor. This GEN3 does however feature a new side plate design to accommodate the AEG selector plate and is equipped with a new electronic switchboard. One advantage to this new design is that the switchboard offers a wider contact point with the selector plate to allow for varying tolerances in the rifles selector assembly making for improved out-of-the-box compatibility with an increased number of rifle brands.
As requested by many of our fans, the FE GEN3 will come standard with our newly redesigned “Milsim Manifold”. This feature enables the user to install an optional 90 degree fitting inside of their engine allowing the air line to be routed to the rear of the engine and exit through the buffer tube sling plate on an M4 series rifle.
As with all of our engine models, you can quickly change and adjust key functions of the engine via the on-board FCU (Fire Control Unit) which is no bigger than an AEG`s MOSFET and can easily fit inside of a rifles battery compartment along with a small Li-po battery. Using the FCU`s five position joystick and LCD display you will be able to easily adjust such functions as the systems cyclic rate, fire modes and nozzle timing on the fly.
With the Fusion Engine™ in your rifle you will also be able to adjust its muzzle velocity via the remote air rig (sold separately). Adjusting the PSI output on your air rig will allow you to fine tune your rifles muzzle velocity so you will always be able to get it exactly where you want it. And then for larger velocity changes we offer a series of air nozzles with varying bore sizes to shift the velocity adjustment range up or down to best meet your requirements.
The best part is that our system is extremely user friendly. Even if you have only the basic understanding of an airsoft rifle, you will find that operating and manipulating this system is very simple and does not require a degree in airsoft engineering to figure out.
Fire mode/s : Full Auto, Semi Auto, Variable Burst
FE Profile: M4
Included Selector Plate: M4/M16 Series
Cyclic Rate: 500 RPM to 1,800 RPM
Fire Modes: Semi / 2 to 9 Shot Burst, Semi / Full Auto, Semi Only
Power Source: HPA (High Pressure Air via remote air rig)
FCU Battery: 7.4v Lipo w/ JST Connector
FCU Voltage Input Range: 6.8v to 12v
PSI Operating Range: 80 psi. to 120 psi.
Build Material: Aluminum
Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.
|HPA System||Polarstar Fusion Engine|
|HPA Fitting type||6mm hose|
Ares are continuing with the Amoeba Innovations M4 style AEGs, except this time they look a little more like a M4. They've released three different version. The CG-001, CG-002, and CG-003. They all have the same Amoeba receiver you've seen on their last product, the Amoeba pistol grip and a 300 round hi cap PMG magazine which has a fold out rubber piece to protect it from drops. The magazine also looks as if there are cartridges inside making it look realistic.
This is where the similarities end. The CG-003 is the full carbine length version with QUAD rails and an uninterrupted top rail for all your accessories and even more space for additional rails. On top are their own flip up, removable front and rear sights. It has a Amoeba style extendable stock. It's length makes it ideal for outdoor skirmishes as the fps is a little high. Since it's very accurate at ranges of 20 meters, you'll have no trouble picking off your targets.
The AMOEBA uses ARES's Electric Fire Control System so you can make your AMOEBA shoot in burst fire if you wish. Inside, you can find a MOSFET so each and every single shot is even and consistent with one full rotation of the gears.
|Firing mode||Semi + Full automatic|
|Inner Barrel dia (mm)||6.03|
|Magazine Version||Hi Cap (scroll wheel)|
|Battery charger||Not Included|
|Battery Connector||Small Tamiya|
|Power (FPS @ 0.20gr)||400 Fps|
This service include all the the following task done in our workshop.
- Unmount of the original airsoft gun
- modification of the original gun to fit the new HPA system
- Installation of the HPA engine including spare tapet plate if necessary
- Installation of a spare MOE motor grip with grip connect
- Installation of any accessory such as inner barrels ... purchased with the HPA gun
- Firing tests (around 500-600 BBs) to check about the working and grouping.
- FCU optimal programmation
- Test of the regulator and the tank
- 1 year warranty
- Additionnal engravings if you need !
This modification allow to reduce the Fusion engine air consumption
P6 poppet & nozzle mod include :
FPS may change with inner barrel lenght and inner diameter
What is ICFU System ?
The ICFU System (Integrated Custom Firestop Upgrade) is a device which allows to stop firing when there is no BB left in the magazine. The ICFU system can be fitted on a M4, 416 or Scar-L airsoft gun equipped with a fusion engine (new feature) or drop-in HPA System type (exept N7 MILSIM) and requires specific 120 rounds magazines (originally PTS but modified).
Players buying a brand new complete HPA gun get 75% discount on the price, because the gun is already unmounted to install the HPA system and of course it is cheaper to make the mod rather than unmount & mount everything just for that. Only remain ICFU modification fees such as milling the gearbox shells, wiring, components and tests.
ATTENTION: Classic M4 AEG magazines will no longer be compatible when the system is fitted and could cause damage to the sysytem if inserted on the lower receiver.
Choose your regulator (include regulator and line)
Choose your HPA tank
Tanks are delivered empty
|PI approved regulator||yes|
|PI approved tank||yes|
Choose the battery model for your FCU.
This option is only available in our packs and cannot be bought separately.