The P6 Workshop is proud to present the Ares Am-016 with Polarstar Fusion Engine system fitted by our services. All unmounted AEG spare parts are delivered.
- Polarstar Fusion Engine fitted with all the internals modifications
- EasyConnect system fitted on the motor grip : no more visible macroline hose, just click & go.
- Firing tests to control working, range and accuracy
- Custom trigger with reduced stroke : for more comfort and responsiveness
- Poppet mod : we modify the poppet and transform the blue nozzle as a red one, it is lowering air consumption
- Also classic options such as regulator, air tanks, batteries and battery charger can be chosen if you are not already equipped
We can also configure and add special upgrade and accessories to your airsoft gun :
- Add RIS, GRIPS, silencers, etc .., we will mount it for you
- Add any type of parts such as rubber, hop-up unit, inner barrels (can be cutted to the exact length of the gun)
- Laser markings if you want ! on the body, dust cover or any aluminum/steel surface available, it is also free!
For this options or if you have any questions, do not hesitate to contact us by phone 0033-534278810 or firstname.lastname@example.org
Have you ever dreamed of Polarizing your MP5, G3 or SCAR? With the introduction of the GEN3, now you can! At first glance the GEN3 FE looks very much like the GEN2 and, for the most part, the two are quite similar. However, unlike its predecessor, the FE GEN3 is no longer just for the M4/M16 series rifle. We applied the same concept used with our Version 3 Fusion Engine™ so that it is now able to interface with the selector plate and related components of your existing AEG’s gearbox.
The FE GEN3 will come complete with a trigger and steel selector plate so that it can be installed into any airsoft gun which is Tokyo Marui compatible. However, by installing a different nozzle or rifle specific conversion kit, you will be able to expand the number of rifles it will be compatible with. In most cases all you’ll need to do is change out the trigger and selector components with ones from your AEG, install a different Fusion Engine™ nozzle, and the engine is ready to use in a completely different model of rifle.
The internal operation of the Fusion Engine cylinder assembly are exactly the same and share many of the same parts, so it offers the same stellar downrange performance and rock solid reliability as its predecessor. This GEN3 does however feature a new side plate design to accommodate the AEG selector plate and is equipped with a new electronic switchboard. One advantage to this new design is that the switchboard offers a wider contact point with the selector plate to allow for varying tolerances in the rifles selector assembly making for improved out-of-the-box compatibility with an increased number of rifle brands.
As requested by many of our fans, the FE GEN3 will come standard with our newly redesigned “Milsim Manifold”. This feature enables the user to install an optional 90 degree fitting inside of their engine allowing the air line to be routed to the rear of the engine and exit through the buffer tube sling plate on an M4 series rifle.
As with all of our engine models, you can quickly change and adjust key functions of the engine via the on-board FCU (Fire Control Unit) which is no bigger than an AEG`s MOSFET and can easily fit inside of a rifles battery compartment along with a small Li-po battery. Using the FCU`s five position joystick and LCD display you will be able to easily adjust such functions as the systems cyclic rate, fire modes and nozzle timing on the fly.
With the Fusion Engine™ in your rifle you will also be able to adjust its muzzle velocity via the remote air rig (sold separately). Adjusting the PSI output on your air rig will allow you to fine tune your rifles muzzle velocity so you will always be able to get it exactly where you want it. And then for larger velocity changes we offer a series of air nozzles with varying bore sizes to shift the velocity adjustment range up or down to best meet your requirements.
The best part is that our system is extremely user friendly. Even if you have only the basic understanding of an airsoft rifle, you will find that operating and manipulating this system is very simple and does not require a degree in airsoft engineering to figure out.
Fire mode/s : Full Auto, Semi Auto, Variable Burst
FE Profile: M4
Included Selector Plate: M4/M16 Series
Cyclic Rate: 500 RPM to 1,800 RPM
Fire Modes: Semi / 2 to 9 Shot Burst, Semi / Full Auto, Semi Only
Power Source: HPA (High Pressure Air via remote air rig)
FCU Battery: 7.4v Lipo w/ JST Connector
FCU Voltage Input Range: 6.8v to 12v
PSI Operating Range: 80 psi. to 120 psi.
Build Material: Aluminum
Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.
|HPA System||Polarstar Fusion Engine|
The ARES Amoeba AM-016 AEG Series comes in either tan or black and is the latest line of Amoeba AEGs which we all know to be more reliable than its predecessors. This particular M4 style is known as the Honey Badger from the popular computer game Call Of Duty.
Ares are known for making affordable AEG that performs very well straight out of the box. They started selling their line of products in 2009 and have a good reputation ever since. Majority of their guns can be upgraded with their own line of parts.
It works with the ARES / Amoeba Electronic Gearbox Programmer for ARES Electronic Firing Control System Gearbox so you can set your AEG to burst fire if you prefer. The trigger response is excellent and works best with a 7.4v battery which is stored in the stock tube (max 115mm X 22mm X 20mm). It's a little fidgety, but it fits perfectly so you don't get any rattling.
|Firing mode||Semi + Full automatic|
|Thread type||14mm clockwise (CW)|
|Inner Barrel dia (mm)||6.03|
|Magazine Version||Hi Cap (scroll wheel)|
|Battery charger||Not Included|
|Battery Connector||Small Tamiya|
|Power (FPS @ 0.20gr)||400fps|
This service include all the the following task done in our workshop.
- Unmount of the original airsoft gun
- modification of the original gun to fit the new HPA system
- Installation of the HPA engine including spare tapet plate if necessary
- Installation of a spare MOE motor grip with grip connect
- Installation of any accessory such as inner barrels ... purchased with the HPA gun
- Firing tests (around 500-600 BBs) to check about the working and grouping.
- FCU optimal programmation
- Test of the regulator and the tank
- 1 year warranty
- Additionnal engravings if you need !
Aucun avis pour le moment.
Pin front and pin back body
This modification allow to reduce the Fusion engine air consumption
P6 poppet & nozzle mod include :
FPS may change with inner barrel lenght and inner diameter
Aucun avis pour le moment.
If you want to change the trigger in your set up, we will install it for you !
Choose your regulator (include regulator and line)
Choose your HPA tank
Tanks are delivered empty
|PI approved regulator||yes|
|PI approved tank||yes|
Choose the battery model for your FCU.
This option is only available in our packs and cannot be bought separately.