This set include HK417 SNIPER tuned with REDLINE Lightning fitted. All the details of our workshop preparation can be found bellow. Gun comes with integrated grip connect in EU or US version, VFC hard case, bipod and 100 rounds mid cap magazine. All the unmounted original parts are included in the package.
- 7.4v lipo battery : Optional, selectable
- Regulator : Optional, selectable
- Tank : Optional, selectable
- Battery charger
Include VFC Hard Case
Umarex's Full Metal HK 417 is the first of airsoft AEG of it's kind to hit the market. It is very similar to the HK 416 except that it's real steel counterpart uses 7.62 caliber rounds so the magazine and lower receiver is larger than the HK 416.
It is of a full metal construction and has been engraved with HK Trademarks as it is licensed by H&K. The ergonomic pistol grip is made out of nylon fiber and is very comfortable to grasp. The 6 position adjustable crane stock is also made of nylon fiber and has very authentic H&K markings as it should. The butt pad itself is made of rubber which is very comfortable when applied against the shoulder.
The HK 417 features a solid, CNC Aluminium, free float rail system and two sling attachment points are mounted at the front and at the back. The internals are of exceptional quality as from VFC with self shimming gears which makes for a very smooth operating system.
Another new feature of the HK 417 is that that the version 2 gearbox has now been upgraded to a V2.2 gearbox. The new features consists of the motor being at a steeper angle which allows the use of traditional pistol grips and anything that will come out in the future. The top part of the gearbox is a little thinner as well so the receiver of the HK 417 can be thinner in comparison to what you're used to seeing on a traditional M4/SR25 AEG.
It shoots at a very consistent 360 fps and consistency is what you look for. It's great for most CQB areas but if it's still too high or too low for you, we can change that!
-- Official H&K (HECKLER & KOCH) Licensed Authentic Marking on Body
-- Fully / Semi-Auto Shooting Mode
-- 500mm Outer Barrel With 40mm Flashider
-- Full Metal Free Float Rail System (325mm)
-- Nylon Fiber 6 position adjustable crane stock and Pistol Grip (Authentic H&K marking)
-- 100rds Loading Capacity polymer mid-cap (7.62 Type) Magazine - Dummy Cartridge Inside the Mag
-- Full Metal Bipod
-- Folding Front Sight and Flip-up Rear Sight
Item Weight (gram) 4340
Length 1005mm / 1085mm (Extened)
Barrel Length ~460mm
Shooting Mode Semi/Fully Automatic
AEG Motor Long / High Torque
Barrel Thread Type Clockwise
Barrel Thread Diameter 14mm
Magazine Capacity 100 Rounds
Bullet Type 6mm BB
Power (Muzzle Velocity) 360 FPS
Package Includes :
- Umarex (VFC) H&K HK417 Airsoft AEG Sniper Rifle
- 100 rounds polymer mid-cap Magazine
- VFC hard case
Manufacturer : Umarex
|Type||417 / G28|
|Firing mode||Semi - Full auto|
|Length||1000 / 1095 mm|
|Inner barrel (mm)||460mm|
|Inner Barrel dia (mm)||6.03mm|
|Gear ratio||Torque 18:1|
|Quick change spring||No|
|Trigger System||Mecanic Switch|
|Magazine Version||Mid cap spring operated|
|Battery charger||Not Included|
|Battery Connector||Small Tamiya|
|Power (FPS @ 0.20gr)||360fps|
The Redline SR-E Lightning is a Patent Pending HPA drop in cylinder replacement. The Lightning is not just another cylinder replacement engine. It uses only a single solenoid, has a forward biased nozzle and fires from a true closed bolt.
Due to its true closed bolt design the Lightning is much more consistent in seating the BB in the bucking from shot to shot when compared to a typical open bolt HPA engine. The result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range when compared to open bolt HPA engines.
A unique feature of the Lightning is that it uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the Lightning fills an internal air chamber at the pressure set by the users external supply regulator.
When fired, this air chamber is mechanically sealed off from the supply and the chambers contents is released down the barrel to propel the BB. This feature contributes to the Lightnings excellent shot to shot consistency, with no air wasted do to improper dwell settings.
The Lightning is also super simple to set up. Since there is no poppet dwell to tune you just set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot regardless of BB weight, barrel length or any other factor is all that is released.
The FCU is programmable for:
1 : Nozzle Dwell.
2: Semi Auto Max Rate of Fire
3: Full Auto / Burst Mode
4: Full Auto Rate of Fire
5: Anti Stiction Pulse
6: Selector position
You can also convert the Lightning from electro-pneumatic to a mechanical-pneumatic operation with an optional conversion kit.
SR-E Lightning key features:
|HPA System||Redline SR Lightning|
|Firing mode||Semi - Full auto|
Switchboard and spacer kit for F1 / Jack / F2 Polarstar and Redline , suitable for Hk417 & Hk G28 aeg rifle
It is necessary to solder the wires onto the original trigger system, professionnal installation is highly recommanded
No reviews at this time.
This service include all the the following task done in our workshop.
- Unmount of the original airsoft gun
- modification (if needed) of the original gun to fit the new HPA system
- Installation of the HPA engine
- Modification of the original Nozzle -if needed- with our turning lathe based on the exact lenght of the gun original nozzle (0.01mm tolerance)
- Installation of the motor grip plate connect
- FCU optimal programmation with reverse selector set to get the correct configuration SAFE - SEMI - AUTO fonctions
- Rework of the HK417 / G28 hop-up unit to get stable FPS, reliable performance and good seal.
- Installation of any precision inner barrel if added in your cart, we will re-cut it with turning lathe to fit perfectly if needed.
- Test of the regulator and the tank (if chosen)
- Firing tests (around 500-600 BBs) to check about the working and grouping.
- 1 year warranty
- Additionnal engravings if you need !
No reviews at this time.
Choose your regulator (include regulator and line)
Choose your HPA tank
Tanks are delivered empty
|PI approved regulator||yes|
|PI approved tank||yes|
Choose the battery model for your FCU.
This option is only available in our packs and cannot be bought separately.