Estimated preparation time : 2-5 days
Warning: Last items in stock!
P6 workshop release the VFC leopard with a selectable HPA system. the FCU & battery (if chosen) are located on the small stock tube. We advice you to keep the original & beautiful Crusader trigger if you choose the "Custom trigger with shortened course". Gun comes with original VFC hard case. Please note, installation of the Polarstar Fusion Engine will make the right sided selector deactivated.
Your HPA Airsoft Gun will be delivered with the following features :
- HPA system fitted with all the internals modifications (choose your HPA system in the list)
- Grip Connect system fitted on the motor grip: no more visible macroline hose, just click & go.
- Firing tests to control working, range and accuracy
You can find the complete details in the tabs below.
Additional options are available if you want to complete your HPA equipment around the gun :
- ICFU : Gun stop firing when magazine is empty, a must have ! requires special ICFU magazines
- Custom trigger with reduced stroke : for more comfort and responsiveness
- Also classic options such as regulator, air tanks, batteries and battery charger can be chosen if you are not already equipped
- Special stock tubes such a Wolverine Wraith & Quake are available, please contact us if you want to add one.
You can find more details in the tab below.
In addition to that, you can also configure your replica as you wish before sending:
- Add a RIS in your cart with this HPA gun, we will mount it for you for free before sending.
- Add any type of accessories such as rubber, hop-up unit, inner barrels (can be cutted to the exact length of the gun)
- Laser markings if you want ! on the body, dust cover or any aluminum/steel surface available, it is free!
For this options or if you have any questions, do not hesitate to contact us by phone 0033-534278810 or email@example.com
The Redline SR-E Lightning is a Patent Pending HPA drop in cylinder replacement. The Lightning is not just another cylinder replacement engine. It uses only a single solenoid, has a forward biased nozzle and fires from a true closed bolt. Due to its true closed bolt design the Lightning is much more consistent in seating the BB in the bucking from shot to shot when compared to a typical open bolt HPA engine. The result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range when compared to open bolt HPA engines. A unique feature of the Lightning is that it uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the Lightning fills an internal air chamber at the pressure set by the users external supply regulator. When fired, this air chamber is mechanically sealed off from the supply and the chambers contents is released down the barrel to propel the BB. This feature contributes to the Lightnings excellent shot to shot consistency, with no air wasted do to improper dwell settings. The Lightning is also super simple to set up. Since there is no poppet dwell to tune you just set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot regardless of BB weight, barrel length or any other factor is all that is released.
The Hurricane is the flagship of our new SR line of engines. The SR-M Hurricane is an evolution of the now famous N7 Milsim. Both engines being semi only, closed bolt mechanical- pneumatic drop-in HPA engines. Although the Hurricane shares no parts with the N7 Milsim. The Hurricane does have the same outstanding performance and reliability that N7 Milsim owners have come know and love, with the added benefit of increased air efficiency. The fact that the Hurricane is mechanical-pneumatic means that there is no battery or FCU needed. Just plug in your regulated air source and you are good to go. That also means that even rain and snow are not a worry since there are no electronics to short or corrode. Due to its true closed bolt design, the Hurricane is much more consistent in seating the BB in the bucking from shot to shot. When compared to typical open bolt HPA engines, the result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range.A unique feature of the Hurricane is that it uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the Hurricane fills an internal chamber at the pressure set by the users external supply regulator. When fired, this air chamber is mechanically sealed off from the supply and the chambers contents released down the barrel to propel the BB. This feature contributes to the Hurricane’s excellent shot to shot consistency, with no air wasted do to improper dwell settings. The Hurricane is also super simple to set up. Since there is no FCU to tune, you just set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot regardless of BB weight, barrel length or any other factor is all that is released. Please note that the N7 Hurricane is not compatible with ICFU and Custom trigger with shortened course, do not choose those options if you want an N7 Milsim
F2 is essentially a Mini Fusion Engine. It offers the same adjustability and performance as the Fusion Engine in a cylinder sized package. Patented Dual Solenoid Design : The dual solenoid design of the F2™ provides the same functionality as the legendary Fusion Engine™ but in a more compact, efficient and flexible design. Dual solenoids allow for the nozzle and the poppet valve to be adjusted independently of each other for unparalleled control over both the loading time and air volume used. Additionally, this makes it possible to change the firing sequence giving it the ability to operate in both true closed bolt as well as "AEG" mode. Increased Efficiency : The F2™ incorporates a new one-piece, lightweight poppet valve design yet still operates on the same principle as the Fusion Engine™ poppet. This valve is able to operate at lower pressures and uses less air volume to function which optimizes air efficiency. The standard F2 poppet is equivilent to the Red Low-Flow poppet of the Fusion Engine. comes with REV3 FCU
Polarstar F1 Mini FCU & Standard FCU
The F1 is a high performance, universal HPA drop-in cylinder. Comes with REV3 FCU (led screen & joystik) or mini FCU (programmation with trigger)
Polarstar Jack Mini FCU & Standard FCU
lthough economically priced, JACK™ still retains the same performance and quality you have come to expect from PolarStar products. Comes with REV3 FCU (led screen & joystik) or mini FCU (programmation with trigger)
Wolverine Inferno Premium / Spartan / Bluetooth
The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. The GEN 2 Inferno is a HYBRID of Open Bolt and Closed Bolt technology. It takes the advantages of Open Bolt, but takes out the hassle of tuning and searching for the right hop up/bucking/barrel combinations.. Premium version comes with FCU in the stock tube, Spartan comes with FCU in the gearbox (programmation with trigger), Bluetooth comes with FCU in the stock tube & programmable with Android.
Wolverine Reaper Premium / Spartan / Bluetooth / Electro Mecanic
The Reaper is a new HPA airsoft system from Wolverine that features a true "closed bolt" firing system. The air is locked and loaded for its first shot, ready to go. Premium version comes with FCU in the stock tube, Spartan comes with FCU in the gearbox (programmation with trigger), Bluetooth comes with FCU in the stock tube & programmable with Android, Electro Mecanic comes without FCU and is semi-auto only
Polarstar Fusion Engine
the patented Fusion Engine is one of the most reliable, high performance airsoft systems available today. No matter if you need a high fire rate CQB setup or a high velocity sniper platform, the Fusion Engine can do it all without sacrificing dependability or trigger response. Comes with REV3 FCU (led screen & joystik)
Polarstar Fusion Engine + poppet mod
This modification allow to modify the original Fusion Engine to the range of power used mostly in european countries & reduce by 30 % the air consumption, also overall performances are improved. Min Power is 340 FPS & Max power is 430 FPS @ 120 PSI. FPS may change with inner barrel lenght and inner diameter. We have The lowered Original Poppet air flow by 75% and turn the original Nozzle in red Nozzle (4mm inner diameter) with our turning lathe.
No reviews at this time.
What is ICFU System ?
The ICFU System (Integrated Custom Firestop Upgrade) is a device which allows to stop firing when there is no BB left in the magazine. The ICFU system can be fitted on a M4, 416 or Scar-L airsoft gun equipped with a fusion engine (new feature) or drop-in HPA System type (exept N7 MILSIM) and requires specific 120 rounds magazines (originally PTS but modified).
Players buying a brand new complete HPA gun get 75% discount on the price, because the gun is already unmounted to install the HPA system and of course it is cheaper to make the mod rather than unmount & mount everything just for that. Only remain ICFU modification fees such as milling the gearbox shells, wiring, components and tests.
ATTENTION: Classic M4 AEG magazines will no longer be compatible when the system is fitted and could cause damage to the sysytem if inserted on the lower receiver.
No reviews at this time.
We shorten at the max the trigger course byinserting a screw on the gearbox shell. P6 adjustable trigger mod gives the possibility to reduce the original trigger course close to the maximum for high speed response. The safety fonction is also modified to let the trigger close to the swich while keeping the safe mode fonctionnal.
Modification is made on the original trigger, you keep the possibility to add a spare CNC trigger in your order, we will take this last one to make the mod.
Not compatible with MAXX Model and G&G trigger
The VFC Avalon Leopard Carbine AEG comes with a full metal body and high quality Avalon engravings. With an extendable stock it allows you to adjust the length of the rifle that fits your body! What makes this different to the previous series is that this one is styled to a sports theme with the red parts such as the aggressive looking hand guard, trigger, charging handle and mag release. Comes with a 120 round Mid capacity QRS magazine. Metal flash hider can be screwed off for installation of a 14mm clockwise threaded silencer, just like the Marui M4A1. Dust cover can be flipped open to reveal hop-up adjuster. This particular version comes with an ambidextrous fire selector which is lefty friendly.
It features a keymod rail system with with a monolithic top rail, ample room for all sorts of sights and accessories. In the real steel world, this makes things much easier when it comes to stabilizing yourself after each and every shot but in the airsoft world, it's for aesthetics. It also depends on how you like to hold your AEG.
You can choose the Balystik 7.4V 1600mah Lipo battery that fit perfectly the battery storage and will give excellent autonomy & reactivity !
|Thread type||14mm clockwise (CW)|
|Inner barrel (mm)||160|
|Inner Barrel dia (mm)||6.03|
|Gear ratio||Torque 18:1|
|Quick change spring||Yes|
|Integrated Mosfet||Yes Factory built in|
|Trigger System||Mecanic Switch|
|Firing mode||Semi - Full auto|
|Magazine Version||Mid cap spring operated|
|Power (FPS @ 0.20gr)||330|
This service include all the the following task done in our workshop.
- Unmount of the original airsoft gun
- Modification (if needed) of the original gun to fit the new HPA system
- Modification (if needed) of the HPA nozzle to match perfectly with the original AEG nozzle outside length
- Installation of the HPA engine
- Installation of the motor grip plate connect (US or EU), if you don't purchase any regulator with the gun just let us know wich one you want. available on all models exept M249 A&K.
- FCU optimal programmation
- Unmount, cleanning & improvement of the hop-up unit
- Firing tests (around 500-600 BBs) to check about the working and grouping.
- Test of the regulator and the tank if purchased
- Additionnal engravings if you need !
- 1 year warranty
No reviews at this time.
Choose your regulator (include regulator and line)
Choose your HPA tank
|PI approved regulator||yes|
|PI approved tank||yes|
Choose the battery model for your FCU.
This option is only available in our packs and cannot be bought separately.