P6 workshop release Krytac Aegs with a selectable HPA system fitted. The beautiful shape & finish of those airsoft guns combined with high performance HPA system make an amazing combination. We strongly advice you to not change first the original hop-up chamber, rubber and inner barrel because they deliver very good performance out of the box. Please note, installation of the Polarstar Fusion Engine will make the right sided selector deactivated. the MK2 SPR bundle comes with spare CQB complete upper and both configuration will be tested with firing test before shipping.
Your HPA Airsoft Gun will be delivered with the following features :
- HPA system fitted with all the internals modifications (choose your HPA system in the list)
- Grip Connect system fitted on the motor grip: no more visible macroline hose, just click & go.
- Firing tests to control working, range and accuracy
- All the original parts of the airsoft guns are included in the package
You can find the complete details in the tabs below.
Additional options are available if you want to complete your HPA equipment around the gun :
- ICFU : Gun stop firing when magazine is empty like a PTW, a must have ! requires special ICFU magazines
- Custom trigger with reduced stroke : for more comfort and responsiveness
- Also classic options such as regulator, air tanks, batteries and battery charger can be chosen if you are not already equipped
- Special stock tubes such a Wolverine Wraith (with or without dual source) & Quake are available, please contact us if you want to add one.
You can find more details in the tab below.
In addition to that, you can also configure your replica as you wish before sending:
- Add a RIS in your cart with this HPA gun, we will mount it for you for free before sending.
- Add any type of accessories such as rubber, hop-up unit, inner barrels (can be cutted to the exact length of the gun)
- Laser markings if you want ! on the body, dust cover or any aluminum/steel surface available, it is free!
For this options or if you have any questions, do not hesitate to contact us by phone 0033-534278810 or firstname.lastname@example.org
The Redline SR-E Lightning is a Patent Pending HPA drop in cylinder replacement. The Lightning is not just another cylinder replacement engine. It uses only a single solenoid, has a forward biased nozzle and fires from a true closed bolt. Due to its true closed bolt design the Lightning is much more consistent in seating the BB in the bucking from shot to shot when compared to a typical open bolt HPA engine. The result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range when compared to open bolt HPA engines. A unique feature of the Lightning is that it uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the Lightning fills an internal air chamber at the pressure set by the users external supply regulator. When fired, this air chamber is mechanically sealed off from the supply and the chambers contents is released down the barrel to propel the BB. This feature contributes to the Lightnings excellent shot to shot consistency, with no air wasted do to improper dwell settings. The Lightning is also super simple to set up. Since there is no poppet dwell to tune you just set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot regardless of BB weight, barrel length or any other factor is all that is released.
The Hurricane is the flagship of our new SR line of engines. The SR-M Hurricane is an evolution of the now famous N7 Milsim. Both engines being semi only, closed bolt mechanical- pneumatic drop-in HPA engines. Although the Hurricane shares no parts with the N7 Milsim. The Hurricane does have the same outstanding performance and reliability that N7 Milsim owners have come know and love, with the added benefit of increased air efficiency. The fact that the Hurricane is mechanical-pneumatic means that there is no battery or FCU needed. Just plug in your regulated air source and you are good to go. That also means that even rain and snow are not a worry since there are no electronics to short or corrode. Due to its true closed bolt design, the Hurricane is much more consistent in seating the BB in the bucking from shot to shot. When compared to typical open bolt HPA engines, the result is more consistent shot to shot velocity, tighter groupings and greater accuracy at range.A unique feature of the Hurricane is that it uses a mechanically sealed, dump chamber. Rather than relying on solenoid dwell to control the volume of air used to propel the BB, the Hurricane fills an internal chamber at the pressure set by the users external supply regulator. When fired, this air chamber is mechanically sealed off from the supply and the chambers contents released down the barrel to propel the BB. This feature contributes to the Hurricane’s excellent shot to shot consistency, with no air wasted do to improper dwell settings. The Hurricane is also super simple to set up. Since there is no FCU to tune, you just set your supply regulators output pressure to match the Joules required and you are good to go. The proper amount of air needed for each shot regardless of BB weight, barrel length or any other factor is all that is released. Please note that the N7 Hurricane is not compatible with ICFU and Custom trigger with shortened course, do not choose those options if you want an N7 Milsim
F2 is essentially a Mini Fusion Engine. It offers the same adjustability and performance as the Fusion Engine in a cylinder sized package. Patented Dual Solenoid Design : The dual solenoid design of the F2™ provides the same functionality as the legendary Fusion Engine™ but in a more compact, efficient and flexible design. Dual solenoids allow for the nozzle and the poppet valve to be adjusted independently of each other for unparalleled control over both the loading time and air volume used. Additionally, this makes it possible to change the firing sequence giving it the ability to operate in both true closed bolt as well as "AEG" mode. Increased Efficiency : The F2™ incorporates a new one-piece, lightweight poppet valve design yet still operates on the same principle as the Fusion Engine™ poppet. This valve is able to operate at lower pressures and uses less air volume to function which optimizes air efficiency. The standard F2 poppet is equivilent to the Red Low-Flow poppet of the Fusion Engine. comes with REV3 FCU
Polarstar F1 Mini FCU & Standard FCU
The F1 is a high performance, universal HPA drop-in cylinder. Comes with REV3 FCU (led screen & joystik) or mini FCU (programmation with trigger)
Polarstar Jack Mini FCU & Standard FCU
lthough economically priced, JACK™ still retains the same performance and quality you have come to expect from PolarStar products. Comes with REV3 FCU (led screen & joystik) or mini FCU (programmation with trigger)
Wolverine Inferno Premium / Spartan / Bluetooth
The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. The GEN 2 Inferno is a HYBRID of Open Bolt and Closed Bolt technology. It takes the advantages of Open Bolt, but takes out the hassle of tuning and searching for the right hop up/bucking/barrel combinations.. Premium version comes with FCU in the stock tube, Spartan comes with FCU in the gearbox (programmation with trigger), Bluetooth comes with FCU in the stock tube & programmable with Android.
Wolverine Reaper Premium / Spartan / Bluetooth / Electro Mecanic
The Reaper is a new HPA airsoft system from Wolverine that features a true "closed bolt" firing system. The air is locked and loaded for its first shot, ready to go. Premium version comes with FCU in the stock tube, Spartan comes with FCU in the gearbox (programmation with trigger), Bluetooth comes with FCU in the stock tube & programmable with Android, Electro Mecanic comes without FCU and is semi-auto only
Polarstar Fusion Engine
the patented Fusion Engine is one of the most reliable, high performance airsoft systems available today. No matter if you need a high fire rate CQB setup or a high velocity sniper platform, the Fusion Engine can do it all without sacrificing dependability or trigger response. Comes with REV3 FCU (led screen & joystik)
Polarstar Fusion Engine + poppet mod
This modification allow to modify the original Fusion Engine to the range of power used mostly in european countries & reduce by 30 % the air consumption, also overall performances are improved. Min Power is 340 FPS & Max power is 430 FPS @ 120 PSI. FPS may change with inner barrel lenght and inner diameter. We have The lowered Original Poppet air flow by 75% and turn the original Nozzle in red Nozzle (4mm inner diameter) with our turning lathe.
No reviews at this time.
What is ICFU System ?
The ICFU System (Integrated Custom Firestop Upgrade) is a device which allows to stop firing when there is no BB left in the magazine. The ICFU system can be fitted on a M4, 416 or Scar-L airsoft gun equipped with a fusion engine (new feature) or drop-in HPA System type (exept N7 MILSIM) and requires specific 120 rounds magazines (originally PTS but modified).
Players buying a brand new complete HPA gun get 75% discount on the price, because the gun is already unmounted to install the HPA system and of course it is cheaper to make the mod rather than unmount & mount everything just for that. Only remain ICFU modification fees such as milling the gearbox shells, wiring, components and tests.
ATTENTION: Classic M4 AEG magazines will no longer be compatible when the system is fitted and could cause damage to the sysytem if inserted on the lower receiver.
No reviews at this time.
We shorten at the max the trigger course byinserting a screw on the gearbox shell. P6 adjustable trigger mod gives the possibility to reduce the original trigger course close to the maximum for high speed response. The safety fonction is also modified to let the trigger close to the swich while keeping the safe mode fonctionnal.
Modification is made on the original trigger, you keep the possibility to add a spare CNC trigger in your order, we will take this last one to make the mod.
Not compatible with MAXX Model and G&G trigger
This bundle include the trident MK2 SPR with additionnal 5.5inch complete upper receiver set
The KRISS ARMS group, makers of the famous KRISS Vector, took the airsoft community by storm with their announcement of their new line of Airsoft products under the brand KRYTAC. Demanding nothing short of perfection the Krytac engineers designed the ultimate gearbox taking all of the best features and concepts while listening to the wants and needs of the airsoft community.
Trident MK2 SPR is designed to be the ideal scout rifle to take into the field. The 16inch barrel and 13inch free floating DEFIANCE keymod hand guard gives the user numerous customization options. The DEFIANCE hand guard features three prongs at the front that can be used to brace the gun against barricades, eliminating the need for an aftermarket barricade stop rail accessory. An originally designed DEFIANCE pistol grip enhances the rifles comfort. Additional features include an ambidextrous fire selector and a locking bolt that provides easy access to the KRYTAC rotary hop-up system.
The KRYTAC rotary hop-up has 15 adjustment settings and a numbered adjustment wheel for a quick reference point to determine how much hop is needed. At the rear of the SPR is the KRYTAC adjustable battery stock, which features two different battery configurations, nunchuck style batteries can fit in the tubes or a small lithium polymer brick battery can fit at the rear of the stock in front of the buttpad. A third battery option for the Trident MK2 SPR is a stick battery in the buffer tube. The stock also features two QD sling swivel divots as well as a loop for strap type sling attachments. The SPR has the look of a long distance rifle, and it also has the power plant to back it up.
The Trident MK2 SPR is designed to excel at medium to long distance engagements.
Internally, the gun features a reinforced 8mm ball bearing gearbox with integrated MOSFET to regulate electronic signals and to protect the trigger contacts. The corners of the gearbox that surround the cylinder feature a smooth radius, as opposed to a 90° angle, to prevent fracture. Also, the gearbox shell features a small window on the left side where lubrication can be applied directly to the gears or piston, this window is also convenient for inspecting the angle of engagement with the gearbox fully assembled. Additional gearbox features include a modular spring guide system that will allow the spring to be changed without completely disassembling the gearbox. The KRYTAC piston is made of a durable, lightweight, polymer and features 4 metal teeth, with the 2nd to last tooth absent.
The Cylinder head is padded with an enlarged rubber bumper to optimize the angle of engagement and to absorb energy form the impact of the piston assembly. The material for the gears have been especially formulated to be very strong, Rockwell test figures on the KRYTAC gears are much higher than industry norms. Turning all of the drive train components is the KRYTAC 20k motor.
|Firing mode||Semi - Full auto|
|Thread type||14mm counterclockwise (CCW)|
|Magazine Version||Hi Cap (scroll wheel)|
|Battery Connector||Small Tamiya|
No reviews at this time.
This service include all the the following task done in our workshop.
- Unmount of the original airsoft gun
- Modification (if needed) of the original gun to fit the new HPA system
- Modification (if needed) of the HPA nozzle to match perfectly with the original AEG nozzle outside length
- Installation of the HPA engine
- Installation of the motor grip plate connect (US or EU), if you don't purchase any regulator with the gun just let us know wich one you want. available on all models exept M249 A&K.
- FCU optimal programmation
- Unmount, cleanning & improvement of the hop-up unit
- Firing tests (around 500-600 BBs) to check about the working and grouping.
- Test of the regulator and the tank if purchased
- Additionnal engravings if you need !
- 1 year warranty
No reviews at this time.
Choose your regulator (include regulator and line)
Choose your HPA tank
|PI approved regulator||yes|
|PI approved tank||yes|
Choose the battery model for your FCU.
This option is only available in our packs and cannot be bought separately.