AirsoftPro VSR10 complete trigger set, hop-up & cylinder head - M130

10300-BH-M130

New product

Hors stock

Moyenne de tous les produits du pack
5.0 / 5
Moyenne : 5.0 / 5
Basée sur 2 avis clients.

136,03 € HT

154,58 € TTC

Un des produits n'est plus disponible. Ce pack ne peut pas être acheté

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

AirsoftPro VSR ZERO upgrade trigger GEN 5



65,93 €

-12%

74,92 €

In stock


AirsoftPro Lightweight hybrid piston ZERO for TM VSR, CYMA CM.700, 708



18,99 €

-12%

21,58 €

In stock


AirsoftPro 7mm / 9mm Stainless steel spring guide for VSR-10



11,66 €

-12%

13,25 €

In stock


AirsoftPro 9mm upgrade spring for sniper rifles - M130 (430 FPS)



5,06 €

-12%

5,75 €

In stock


AirsoftPro Double lever Hop Up chamber GEN2 for VSR-10



34,39 €

-12%

39,08 €

Rupture de stock


  1. Ce produit n'est pas disponible pour l'instant.

Content

The new 5th generation of the Zero trigger again brings a number of changes and improvements. At first glance, a modern shape with bevelled edges is visible. The whole shape was completely redesigned. Only two components are identical to the previous generation. The shape modifications now allow to use in M40 (CM.700) as well as. The upper edge follows the round shape of the bolt housing and fits better on it. The steel and hardened spring guide stopper is now part of the entire trigger. The 5th generation brings back safety lever into the game.  It is now part of the package and you can decide whether to simply screw it on or not. Each piece also has its own serial number.

A significant novelty is the adjustable trigger for an ideal position in the bow. The trigger can slide in the groove of the base and is secured with a small allen screw. You can access it even when gun is fully assembled. Smooth adjustment is possible in a 7 mm travel length. Player can set his ideal trigger position.

This is just Zero trigger packing. Please make sure you have a compatible piston with a vertical (0 degree) catch in your rifle. CYMA CM.700 is fully compatible, but if you have VSR system gun, you have to replace also piston. You can find it in this e-shop under 6720 code, or you can buy a complete Upgrade ZERO set including the piston, spring guide and spring under code 10300.

 SPECIFICATIONS:

  • Body made by CNC machining from light, but durable aluminum alloy 6061-T6.
  • Aluminum parts with high quality matt anodized finish
  • Piston sear, trigger sear and the spring guide stopper are made of steel and hardened to HRC 28-32.
  • The top of the trigger is equiped with ball bearing for the smoother trigger moove.
  • Trigger position is now adjustable.
  • Axis are made of stainless steel.
  • Two torsional springs safety returns catch to the original position.
  • Whole trigger is made of 28 parts.
  • Tested up to M170 springs.
  • All spare parts available (based on request).
  • Easy to install under 10 minutes.
  • Complete set is designed and assembled in the Czech Republic. Partial technical solutions are protected by copyright!
  • Package include trigger , assembly screws and safety lever assembly

ZERRO UPGRADE TRIGGER set is compatible with:

  • Marui VSR-10
  • JG BAR-10 (please note that newest models use M4 assembly screws. Out trigger uses M3 so some modification may be needed)
  • Well MB02, MB03, MB07, MB09, MB10, MB11
  • CYMA CM.700 (cannot use safety lever)
  • CYMA CM.701
  • CYMA CM.708

Doesn't fit on M24, Marui AWS, Well MA4401,4402 or Well L96.

 WHY ZERO TRIGGER:

Durable and reliable trigger mechanism is basic premise for a successful upgrade sniper rifle. Stock supplied trigger mechanism is sufficient for basic springs. But when you use stronger springs, significantly increases possibility of the damage. Unfortunately you can`t avoid this even with cheap alloy triggers. Only steel machined mechanism can ensure the greatest durability.

Rifles working on a system Marui VSR have very bad piston catch system. It is capturing only a small edge and angle of 45 degrees. This is sufficient for relatively basic weak spring, but can`t hold stronger springs. In addition, 45 degree system lift piston end and cause jam in the cylinder. Our CNC metal trigger mechanism brings different solution. It holds piston at 0 degree (here comes name Zero Trigger). Surface is larger and can hold stronge springs.

Avis des clients

Tri:
03/31/2022
Ruslan D.
Very good quality trigger

Reinforced piston for your airsoft sniper rifle. For maximum performance and durability. It is the same piston that is used in the AirsoftPro ZERO trigger Gen.4.1 (and higher). The hybrid piston is made of three different materials:

  • Light aluminum body
  • Two POM rings for better sliding in the cylinder
  • Catch back end part made of stainless steel.

Compared to the previous version, the piston was completely redesigned. Rubber pad now exceeds larger area, stainless steel part is shorter, piston is more lightweight. This reduce the weight by a quarter over the previous generation. And lower weight means higher performance. The groove below the sealing ring is shallower with a modified shape, reducing the risk of head deformation due to impact. Improvements have also been made to the sliding POM piston rings for longer life of the front of the piston. They were slightly enlarged so that the metal parts did not touch cylinder and had a smoother surface.

SPECIFICATIONS:

  • The piston is made by CNC machining from light, but durable aluminum alloy 6061-T6 (Dural) with a high-quality anodized finish.
  • The piston catch is made of stainless steel.
  • The piston has two sliding polyacetal (POM) rings.
  • The piston head has an back-pressure system with O-ring (O-ring expands and seals better when shotting).
  • The enlarged inner piston diameter allows you (and we recommend) to insert a stronger 9mm spring upgrade.
  • Dimensions: lenght - 105mm, outer diameter - 21,8mm, inner diameter - 13,5mm
  • Weight: 30g

APPLICATION:

  • CYMA CM.700 , CM.708
  • Tokyo Marui VSR-10 , but can be combined only with the ZERO trigger catch system! Does not work with the stock trigger set, because the stock trigger has a 45° piston sear.

Avis des clients

Tri:

Aucun avis pour le moment.

A brand new type of steel spring guide that allows the use of classic 7mm springs and stronger 9mm spring springs. Inner steel guide with the bearing has outer diamater 7mm. Once you've put on the sleeve, you can use a 9mm upgrade spring (means inner spring diameter). Axial bearing makes pull back much smoother, because of limited spring rotation. This solution also increases the durability of the set - lower friction and spring stress. The spring guide is made of stainless steel with a perfectly smooth surface. Suitable for :

  • Tokyo Marui VSR-10 Pro Sniper and G-Spec
  • JG BAR 10
  • Well MB02,03,07,09,10,11..
  • CYMA CM.701
  • CYMA CM.702
  • CYMA CM.708

Avis des clients

Tri:

Aucun avis pour le moment.

New upgrade spring for bolt action sniper rifles. Made of steel spring wire, blackening surface, thermal tratment. Ends of the spring are grounded in. Older AirsoftPro springs where little bit "over scaled". These new springs better match to its nominal value. Please note this is upgrade spring with the outer diameter 12,8mm and inner diameter 9mm. It is suitable for upgraded pistons which larger inner diameter !

Avis des clients

Tri:

Aucun avis pour le moment.

Second generation of the favourite VSR HopUp unit.  Provide full metal CNC construction for better durability. Better sealing. Hop up unit require to use AEG HopUp bucking (not included) and AEG HopUp barrel. This is advantage, because market offer full range of the various brand barrels and bucking so customer may choose based on needs.

The chamber has a different BBs enter design. This makes it necessary to use a different cylinder head, but it is directly in the package. So you get not only chamber, but also a brand new stainless steel cylinder head ! Small bag in the package include three o-rings  and three pieces of the rubber rolls with the various diameter. User has to cut the piece according to his needs.

Very interesting is HopUp adjustment. Chamber has not one, but two adjusting arms. Pressing roll is longer. Customer is able to adjust arms separately and affect BBs trajectory. Simply says, you can slightly adjust left and right rotation. Above all, second generation has third screw in the middle. It adjust both levers together. So customer can decide if adjust levers separately by screws on the sides or adjust both levers by one screw in the moddle.

HopUp is adjustable from the magwell. Uswer has to remove magazine, pull back bolt and turn with the adjustable hex screws. One on the left for the left arm, one on the right for the right arm and central screw for both levers. Tightening lift lever and cause less rotation on this side.

Specifications (red are improovements in the second generation)

  • CNC production of aluminum alloy 6061- T6 with red anodized finish .
  • Require to use standard AEG barrel.  (Original barrel cannot be used!)
  • Require to use standard AEG HopUp bucking.  (Original bucking cannot be used!)
  • Increased size of the internal O- ring  for maximum sealing and better durability.
  • Two metal pressure arms which allows side trajectory adjustment.
  • Centering ring for good axial of the barrel.
  • Two rubber pads between chamber and cylinder head. This reduce barrel vibrations and improve accuracy.
  • New double seal stainless steel cylinder head in the packing.
  • Adjusting by 1,5mm hex key in the packing.
  • Redesigned body, larger screws for barrel mount.
  • Larger o-rings for main levers force.
  • Improoved BBs feeding.

Chamber is compatible with these models:

Chamber outer diameter is 26,5mm so it is not possible to fit it into Well MB07,09,10,11,12. Also not compatible with the Marui AWS or Well MB44xx series.

Avis des clients

Tri:
08/05/2022
yannick m.
Parfait
Livraison au canada plus rapide que prévu. Produit en parfait état.