Panier
Il y a 2658 avis.
25/10/2023
Michael L.
Ce client a acheté 1 produit(s)
Do not buy
Nothing to do with Powair6 good customer service ,but a part of the gun snapped off flash hider nub and ASG have no replacement parts so would avoid this particular gun, very disappointed in ASG.
(0)
(0)
23/10/2023
Mark Bendorff N.
Ce client a acheté 170 produit(s)
Flimsy, unreliable and a waste of money
You get what you pay for, but I did expect a little more for 12,40 Euro.
*Initial feel and quality*
- Plastic feels very thin and poorly made.
- The entire "upper" and "lower" is held together with two very small screws, allowing the entire unit to flex.
*Inserting the adapter*
- The adapter does fit into the odin speedloader and it even has a groove cut in the side to allow you to store the handle of the odin with the adapter attached.
*Attampting insert a Cyma midcap*
- Rocking the magazines like you would into your gun, won't allow the magazine to engage with the front hook properly, so the adapter will lock in at the magazine catch first and then you can force the front of the magazine in place for loading.
- For ease of manufacture, they've decided that you load the AK magazine "backwards" into the adapter, since Ak magazines feed BBs from the back and M4 magazines feed BBs from the front. Meaning that the magazine is pointing the wrong way when you use the Odin. Not a big deal, but it does get annoying when loading 6+ magazines in a row.
*Loading BBs into the magazine*
- Here's the real kicker. The adapter never managed to completely load a single magazine. BBs jam up in the adapter and completely stops you from loading, giving you the feel of a fully loaded magazine. Testing this again after getting home from a field day, I can confirm that out of the 30 magazines I attempted to load, I only got partial mags loaded, best result was a 80% load on a 150rnd magazine.
(0)
(0)
23/10/2023
Kevin V.
Ce client a acheté 50 produit(s)
Does not fit Tokyo Marui MWS
Good quality for price, easy installation but is not able to close on an MWS because the groove of the bolt carrier is no deep enough.
(0)
(0)
22/10/2023
Vjpc R.
Ce client a acheté 2 produit(s)
Gas options
Is it usable wth NUPROL GBBR PREMIUM GAS 4.0 1000ml 200 psi ? Kind regards,
(0)
(0)
21/10/2023
Philippe B.
Ce client a acheté 24 produit(s)
Drum rk74 t
Dommage ne s enclenche pas du tout sur ma réplique pourtant drum prévu pour.
Je n ose pas forcer comme un taré.
Contact powair6 en début de semaine pour voir avec eux.
(0)
(0)
20/10/2023
arnaud k.
Ce client a acheté 11 produit(s)
20/10/2023
Paul M.
Ce client a acheté 81 produit(s)
Pas à la taille standard d'un chargeur type PMAG
Malheureusement ce chargeur ressemble plus à un pmag 40 voir 50 que 30. C'est dommage car ce n'est pas spécifié sur la fiche technique
(0)
(0)
16/10/2023
Cocquet J.
Ce client a acheté 32 produit(s)
Non compatible
N est pas compatible avec mes deux replique hpa
(0)
(0)
15/10/2023
Gilles D.
Ce client a acheté 15 produit(s)
C'est pas un BlackCat mais un Sotac...
...et les produits estampillés Sotac sont affichés à des prix inférieurs aux BlackCat. Fait correctement le job sauf que la pile s'est vidée toute seule avec le point rouge éteint.
(0)
(0)
14/10/2023
Adrian A.
Ce client a acheté 40 produit(s)
RedLine n7 on E&l Ак74u
The engine is a perfect fit for E&L's AK74u with the standard nozzle (LCT). With the E&L nozzle, although I ordered it, I haven't tried it because it seemed a bit long and could cause problems when feeding the replica with bbs. In reality, the nozzle of RedLine for E§L is 1.5 mm longer than that of LST. However, I would recommend that if you buy an engine, you also get the nozzle for the given manufacturer. I will soon be testing the Cyma AKs and Acturus AKs and writing a review to help other customers decide if this is the right engine for them. Before installation, I recommend inspecting and relubricating the three rubber seals inside the engine, because they may have hardened from sitting and not hold the compression well. 5 minute job and the right type of silicone lube. You also get quieter engine operation.
(0)
(0)
14/10/2023
Wilfrid S.
Ce client a acheté 25 produit(s)
Excellent
Corrige le principal souci avec les chargeurs G36 : se glisse dans une pouch pour m4 !!!
Compatible JG et Specna Arms
(0)
(0)
12/10/2023
Jean L.
Ce client a acheté 2 produit(s)
Chargeur Scar Mk17
Que dire? emballage au top, expédition flash.
Chargeur avec une pointe de gaz pour protéger les valves...
Bref juste parfait Bravo à l'équipe
(0)
(0)
12/10/2023
Viktor S.
Ce client a acheté 74 produit(s)
It fit perfectly vorsk vmp-1
(0)
(0)
11/10/2023
Maxime M.
Ce client a acheté 58 produit(s)
Super qualité
Je n'ai pas acheté le régulateur sur P6 car pas dispo à l'époque, mais je souhaitais laisser un avis ici, car on trouve très peu d'infos concernant ce régu sur le net.
Il est très bien finit, très compact, super taux de rafraichissement et facile d'entretien (on trouve la notice de maintenance sur le site de MANCRAFT). Mention spéciale pour la roulette de réglage, que je trouve bien meilleure et précise que les vis classiques qu'on peut trouver sur les autres régulateurs de cette taille.
S'il fallait lui faire un reproche, ce serait le connecteur qui est super dur (j'ai remplacé le mien par un Balistyk acheté sur P6).
Pour résumer, un super produit bien finit à un tarif correct si on le compare aux autres marques.
(0)
(0)
10/10/2023
Jolivet V.
Ce client a acheté 78 produit(s)
Super qualité, la peinture et la finition sont nickel. Pour le prix c'est imbattable
Mais par contre .... Il est scellé ! impossible de l'ouvrir :/
Il y a de la mousse dedans, mais impossible de le customiser en interne :(
(0)
(0)