Panier
Il y a 2658 avis.
25/05/2016
benjamin F.
Ce client a acheté 44 produit(s)
super
javais vu des video etc sur ce bb loader et au final ba tout ce que jai vu est vrai feed super bien super rapide (beaucoup plus qun bbloader electrique ) tres robuste bref cher mais tres efficace je recommande vivement !
(0)
(0)
20/05/2016
Aleksandr N.
Ce client a acheté 16 produit(s)
Used on a sniper rifle with HPA. At the moment, a good rubber.
(0)
(0)
19/05/2016
david g.
Ce client a acheté 2 produit(s)
AAAh
Super grip! Installé sur M4 MWS Tokyo Marui !
(0)
(0)
17/05/2016
Alistar F.
Ce client a acheté 115 produit(s)
Good
Very fast, very strong, very powerful magnets, construction apparently good, but I do not recommend pinion , poor construction !! ... use an original pinion systema
Use washer set for PTW motor pinion gear
(0)
(0)
16/05/2016
Lars B.
Ce client a acheté 52 produit(s)
Dimensions are wrong
actual dimensions: 129mm x 21mm x 19mm
So they are a little on the big side for the PTW stock tube.
(0)
(0)
16/05/2016
COSTE M.
Ce client a acheté 32 produit(s)
Super gearbox !
très bonne gearbox :
très réactive
silencieuse
les cosses moteur sont solides
(0)
(0)
16/05/2016
Lars B.
Ce client a acheté 52 produit(s)
Wow
This is what I've been waiting for for the 12 years I've been plying airsoft. Used it on G&G M4 midcaps and Systema PTW mags. When loading the PTW mags you need to hold them in place because they don't go in all the way. But there is no problem losing the Loader and the mag with one hand while cranking.
One thing you will need to do is to loctite the screw on the handle. otherwise it will become loose after a few mags.
(0)
(0)
16/05/2016
Lars B.
Ce client a acheté 52 produit(s)
Great mag
Bought a pack to use with a Tippmann M4. Needed to do some filing on the mag catch on the mag to get it to latch. Took about 20 seconds per mag. No feeding issues at all and the mags feels really well built. Will place another order for one more pack soon.
(0)
(0)
09/05/2016
Kai W.
Ce client a acheté 13 produit(s)
FCC Gen2 Mosfet
very nice mosfet. workes perfect
(0)
(0)
08/05/2016
Tomas D.
Ce client a acheté 1 produit(s)
Madbull MK18 12 Inch Daniel Defense RIS II (DE)
excellent produit merci Powair6!
(0)
(0)
07/05/2016
Alistar F.
Ce client a acheté 115 produit(s)
OK
the material is similar to a transparent nylon, does not crack, the springs a little hard for my taste, emptying is a bit heavier, I used some internal FCC and had to change them slightly to get properly
(0)
(0)
06/05/2016
Alistar F.
Ce client a acheté 115 produit(s)
not as on photo
It does not look like on photo, Part which must enter in the Oring is more narrow
(0)
(0)
05/05/2016
Alistar F.
Ce client a acheté 115 produit(s)
Average quality !!
I bought two pieces, best price for stainless steel exterior ... cylinder quality it's good , the front stainless steel, the back are quality aluminum, Interior are average in quality rack similar in quality as Vanaras the only big minus is the head of the piston which is painted aluminum, you give the impression of being in polymer ... should be serviced before use, are poorly lubricants and poorly adjusted ... rack is not bonded to the piston , seals are good ... O-ring on the piston end is a little too soft
(0)
(0)
28/04/2016
arthur l.
Ce client a acheté 10 produit(s)
pratique
pièce obligatoire pour coupler sa réplique en hpa et sont gbb.
Attention pour l’installation pour le pas de vise sur le régulateur.
(0)
(0)
27/04/2016
Jordan V.
Ce client a acheté 53 produit(s)
perfect
Super mags, rentre parfaitement dans mon ares amoeba / ça fais plaisir d'avoir des mid cap d'une grosses capacité!! merci
(0)
(0)