Avis des clients Il y a 7270 avis.

Peu importe le jour ou la période, matériels de qualité, conseils au top, rapidité de réponse, préparation et expédition quasi instantané Je recommande fortement allez y les yeux fermés ou grands ouverts pour votre plaisir Airsoftement FABIEN

Rien à redire sur FPS Softair en général mais après avoir installé ce tappet plate sur ma réplique j'ai rencontré un souci de feeding et aucune bille ne partait car le nozzle était trop avancé. Je ne sais pas si c'est un souci sur celui que j'ai reçu (surement) je tenais juste à prévenir les futurs acheteurs. Par contre ça à l'air d'être un produit solide et de qualité mise à par mon souci

Fast delivery, flawless service.

This arrived on time and looked like it would be a great shell to use in my launcher however the first time I tried to gas it up out of the packet the fill valve fell apart. There has been no contact from powair6 so looks like I have a useless lump of metal. Very disappointed

In a VFC HK416 a5 with prometheus 6.03 inner barrel and Maxx Me pro hop chamber with r hop 4.5mm cnc arm. Huge gain of accuracy and range. Just amazing!

Paket kam sehr schnell an. Jedoch leider von DPD neu verpackt, weil der Karton beim Transport beschädigt wurde. Dennoch alles da und in Ordnung. Patches haben eine sehr hohe Qualität. Dieser Shop ist empfehlenswert

Hello! Does it come with the CO2 mag? can i use it only with the CO2 mag? thank you!

Produit impeccable,, de bonne qualité. Testé sans fuites, 2 chargeurs au premier remplissage. Je n'y avais pas fait attention en commandant mais il est dommage qu'il n'y ai pas le renfort sous le chargeur comme celui fournit avec la réplique .

S’intègre parfaitement sur les passants mais ne se bloque pas complètement pour empêcher la rotation . Peut être gênant lors d'une action.

Hi, Very Good people on the back office!! Nice and serious, I got my LVOA so fast and 5 stars, I will buy again on this shop, and I definitely recommend!! Thanks, regards

a réellement accentué la précision de mon ak 105 ghk, le T-hop fait vraiment le taf, et ce bloc hop-up est vraiment du plus bel effet.

Rien a dire ce gaz est vraiment top par forte chaleur , utilisé dans mon Hi-Capa 5.1 Tokyo Marui par 30° ça marche sans aucun problème

Fonctionne sur Umarex et Cybergun G17 Fonctionne sur Inokatsu G17 uniquement si on change la valve (hi flow) ou le plus simple est d'agrandir les trous de la valve. je conseille dans tous les cas de faire cette manip pour un focntionnement normal ou un meilleur kick

DSG in 18/1 gears :D

je l'ai cassé sans faire expres, le baton a brillé pendant 48h Qualité excellente, son seul defaut est que je le trouve un peu trop grand pour mon gilet

Todo perfecto y rápido en la entrega. Gracias y hasta pronto

These have been great so far, good quality. I only observed one in the entire bag that had some dirt on it

This is a good quality optic given the price point. Construction is very sturdy, adjustments work without problems. Dots are clear and bright, especially outdoor where it's meant to be used.

Just what the Evo Scorpion was lacking ! Stabilized the stock very nicely, no more rattle

I've tried a couple of grip connectors and couldn't get them to work with the sru stock I have. This one works great. Could be a bit fiddly for someone who isn't experienced. Also recommend getting a couple of extra bolts or washers to make it a little more flush/less obtrusive.

Super produit, mais ce qu'il me plaît chez powair6, la livraison, super rapide. Merci

I use it with Super Macaron rubber - they work perfectly together! No problem to use with G&G rotary hop up chamber.

First of all - thank you for excellent and fast service from Powair6! About the rubber - perfect seal on bridged AEG barrel, better range and grouping than standard G&G green rubber and even than with my unprofessional R-hop patch. Highly recommended! My setup for reference: G&G CM AEG, G&G rotary hop up, ZCI steel 6.02 370mm barrel, under 1J due to country limitations (IRL), Maple Leaf Omega Tensioner, 0.32 BBs, effective range 30-60m.

This battery is linked as a fit for the G&G PRK9 RTS but is way too big. Keeps popping the cover and the slide action will not work as too tight. Nothing wrong with the battery though. Just the size.

I bought the P6 Workshop HK 416 with following internals: Gate Titan Basic, Brushless Motor with ICFU. The AEG itself is significantly darker than on the pictures which in all honesty looks way better than the RAL8000 colour which can be still found on the stock. Colourwise it looks similar to a MK18. Now to the internals: P6 did an outstanding job. Especially in combination with the brushless motor the trigger response is insane. No winding of the gears and instant trigger response. I reckon since there is no gear whining, the shimjob is perfect. Triggerpull is very responsive. You cant directly feel a clicking since it's an optical trigger (Titan) but there is a definitive wall when pulling the trigger. Since I ordered a 18:1 gearset with 400fps, the ROF is around 30, which is absolute madness. I also ordered a PTS grip, Trigger and a Maxx Hop Up chamber and asked them to install both for me since I didnt want to mess with anything on this AEG and they were kind enough to install both for me before shipping. Customer service was en par. I've been even called on phone because I ordered the wrong parts and since I wanted to use the ICFU - System they informed me what they were doing and what I had to order to make this AEG work the way I wanted it. Be aware the gun itself is quite loud, I'd recommend using a supressor for this. The only let-down is the fire selector. It is quite flimsy and wobbly but that's not P6's fault. It is a known issue with a lot of VFC guns. Nothing a shim or two cant fix.Sidenote #1: The gate titan advanced set doesnt work with the ICFU system. You must order the basic set.Sidenote 2#: If you order the ICFU magazines, they are bit wobbly in the magwell but fit perfectly and most importantly at least for me if you press the mag-release, they are gonna come out freely without any resistance.HU rubber wise, they used a Super macaron ruber. I have yet to figure out what kind of barrel has been installed since they included the original barrel in the package but there is another one installed.All in all, if you go all in and take the fully upgraded package with the brushless motor, you are absolutely gonna be satisfied and it's worth every euro.

Rien à dire hormis que le site est sérieux comme d’habitude. Jamais d’erreur produit et rapidité d’envoi.

Bon deal Livraison rapide et peu onéreuse. Le chargeur destiné à un Striker.45 convient parfaitement. Tiptop

Enfin un mid cap compatible Jing gong. Fonctionne parfaitement. Livraison rapide. Une tout petit détail à dire : pour le retirer il coince un tout petit peu. Mais rien de très embêtant.

Top notch products, resonable prices, fast delivery and really good customer service! from here on and out im going to do most of my shopping on Powair6!

I gave 4 out of 5 because in my country the fps limit is 400... thats why I ordered the 380fps gun. But when we crono it we had to see sadly that its 410-415 fps... beacuse of that i have to do something with it cause of the rules... But otherwise the gun well qualified, delivery was fast and can followed well!!! Thank you !! Everything is fine with it and Im happy to order from you! This wasnt the last time!