Fabricants

Avis clients

Tri:
14/08/2025
Stéphane B.
Mag M16 VFC GBBr
Rien à redire sur la qualité de ces chargeurs, feed parfait, aucune fuite rien à resserrer bref du VFC! P6 au top...
13/08/2025
Cyril r.
Une belle réplique, comme d'habitude !
Une excellente réplique compacte que Krytac nous met à disposition ! La qualité est au rendez vous aussi bien sur...
13/08/2025
Arthur M.
⭐⭐⭐⭐
Une superbe réplique en terme d'externe, un magnifique bi ton et un beau look sous licence, cependant il faut...
12/08/2025
Quentin L.
Pas compatible avec le LevAR 15
Comme Pierre-Louis, cette valve ne semble pas compatible avec le LevAR, elle fuit.
Team P6
Bonjour, le pas de vis est compatible, néanmoins ce produit nécessite des modifications pour le rendre compatible...
12/08/2025
Fx A.
L'arme est bien, le chargeur fuit jour 1
Le fusil est nickel, rien à redire. Solide, léger, fonctionne bien. La finesse du garde-main et de la crosse sont...
12/08/2025
Thomas L.
Déçu
C'est indiqué comme compatibles avec la mecanique mws marui Mais c'est incompatible avec le mtr 16 Tres...
Team P6
Bonjour, en effet ce produit nécessite des modifications pour etre compatible avec le MTR16. Cdt
12/08/2025
Daimy S.
Great sniper
Amazing sniper. I replaced the spring with a Rapax 2+J and the range is amazing!

Avis des clients Il y a 7522 avis.

Tri:
13/02/2022
Joselito L.
13/02/2022
Joselito L.
Ak mags
Very nice
12/02/2022
Olivier T.
Slt à l'équipe Très bon produit prise de vu très rapide excellent au top
12/02/2022
Olivier T.
Slt à toutes l équipe Excellent produit batterie au top rentre nickel dans le tubes de crosse De ma M4
11/02/2022
Paavo S.
Info about the kythera sr25 JG
I have just installed this to A&K sr25 and it works perfectly. If this info could be added also to the description.
11/02/2022
Dustin R.
I have two things to complain about:
First - the magazine is a great solution for gbb players who just want to have fun and don't want to spend 60€ for 30 shot magazines.BUT:1. The HPA valve is an in and out valve. Since the mp5 magazine still has the original gas valve, one could have (if an only in valve had been installed) filled the magazine with gas during storage and thus avoided a lot of work and leaks.2. The magazine holder is 3d printed. I have had the experience with 3d printed parts that they unfortunately break after 1-2 shots. This would of course be a bad mistake with the magazine, because then the whole construction would fall apart.For me, the biggest shortcoming is that no only in valve was installed.Power6 if you read this. Please take my tip to heart. There is nothing worse in a gas magazine than a gas magazine which is leaking.
Team P6
Hello, whatever the fact you a storing the magazine with or without compressed AIR, it does not affect the durability of the valve orings. Regarding the 3D printed magazine coupler, it is very strong, no risk of break for a normal use of course. regards
10/02/2022
Laurent K.
airsoft
je suis très satisfait de mes articles. je vais enfin pouvoir passé mon pompe en hpa. un grand merci pour la rapidité de livraison,comdab. à très bientôt pour de nouveau achat. merci.
10/02/2022
Floryan D.
Parfait
Super poignée je recommande
10/02/2022
Floryan D.
Bien
J ai une m4 cm16 g&g sa fonctionne parfaitement mais faut être minimum a 100 psi pour le bon fonctionnement
09/02/2022
Renoe M.
Does not fit my umarex glock 17 gen5
In thr questions section it was stated that it is compatible, but allas its not
09/02/2022
Sebastien P.
Commande et SAV excellent !
Je tiens tout d’abord à félicité l’équipe SAV pour leur efficacité et leur rapidité à répondre. La commande a était envoyé rapidement et soigneusement. Que demander de plus? Je recommande les yeux fermé
09/02/2022
Marc G.
gestion des envois très rapide
super site, envoi rapide, très rapide, article réellement en stock, parfait
09/02/2022
Constantin B.
07/02/2022
Sean W.
The rail is great
This rail has been fitted to my TM MWS.You do need an aftermarket barrel adaptor for the MWS, I actually bought a whole new barrel with the ring included.The new rail is much more solid, the trades are great. I did have to cut down the pin that goes where the gas tube used to be as the MWS body hole is quite shallow.Great product and came within 24 hours to the UK.
07/02/2022
Jürgen S.
magazin
alles bestens, funktioniert super. schneller versand . vielen dank
07/02/2022
Konstantins C.
06/02/2022
Eugeniy C.
Thank you.
Hello! big thanks to you. I received my order. Everything is safe. The order came very quickly. Thank you for your promptness. Great job. Thank you.
05/02/2022
Carsten V.
05/02/2022
Sean W.
Great customer service
Fast delivery from France, excellent customer service with quick response time. They have a massive range and I would highly recommend them for all things airsoft.
05/02/2022
Michal O.
Excellent
Didn’t really know what to expect from this weapon. Couldn’t find many reviews. But after testing it I’m more than happy and love the full auto. It’s very good quality and looks awesome.
04/02/2022
Krisztián H.
Perfect
I've ordered this grip for my GHK AK105 and it's just perfect! :D Easy to assembly and looks very durable! I recommend it for everyone who wants a badass grip for the GBBR AK. :)
04/02/2022
Sander K.
Netjes en snel.
Had besteld en kort daarna kreeg ik een mail dat het onderweg was. De producten waren eerder dan verwacht bezorgd. Verder was alles netjes en goed verpakt.
Résultats 3901 - 3930 sur 7522.

PayPal