Maxx Model CNC Hopup Chamber for ASG Scorpion EVO-3

MX-HOP020EVO

New product

In stock

Moyenne des votes pour ce produit
4.8 / 5
Moyenne : 4.8 / 5
Basée sur 13 avis clients.

54,08 € tax excl.

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

More info

CNC Aluminum Hopup Chamber EVO unit is precisely machined to perform accurately and consistently on the ASG CZ Scorpion EVO-3 Airsoft Rifles. The Hopup Chamber EVO unit is built with a Precision Aluminum Rotary Dial Knob for fine hopup adjustments and equipped with 4mm Flat Soft Bucking Nub (6mm Bucking Nub is optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot. The Hopup Chamber EVO unit is designed to accept the 18.5mm nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber EVO unit is wisely built with a self-centering inlet to ensure the hopup unit is inserted exactly in the center of the 11.5mm inner bore ASG EVO-3 gear box outlet without wobbling. Also included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

 
***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

 Includes
product_right_arrow.png1 x CNC Aluminum Hopup Chamber EVO unit
product_right_arrow.png1 x Dual UV LED Boards and Module set (optional)
product_right_arrow.png2 x Strong Clear Vinyl Cover set
product_right_arrow.png1 x CNC Aluminum Soft Round Nub
product_right_arrow.png1 x CNC Aluminum Soft Flat Nub (4mm) (Pre-installed)
product_right_arrow.png2 x Steel Nub Spring
product_right_arrow.png1 x Steel Compression Spring
product_right_arrow.png1 x Brass Dial Bushing
product_right_arrow.png1 x Dial O-ring
product_right_arrow.png1 x CNC Precision Aluminum Rotary Dial Knob
product_right_arrow.png1 x CNC Delrin Locking C-Clip
product_right_arrow.png1 x CNC Brass Barrel Spacer
product_right_arrow.png1 x Brass Barrel Spacer Holder O-ring

 

 Specification
product_right_arrow.pngOverall Length: 47mm
product_right_arrow.pngOverall Height: 26.25mm
product_right_arrow.pngInlet Diameter: 11.5mm
product_right_arrow.pngHub Outer Diameter (to fit into Outer Barrel): 12mm
product_right_arrow.pngHub Inner Diameter (to fit Nozzle): 7mm
product_right_arrow.pngMaterial: Brass/Aluminum 6061

 

 Features
product_right_arrow.pngMachined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
product_right_arrow.pngPerformed accurately and consistently on the ASG 2018 CZ Scorpion EVO-3 Airsoft Rifles
product_right_arrow.pngBuilt-in Precision Aluminum Rotary Dial Knob for fine hopup adjustments
product_right_arrow.pngPre-installed 4mm Flat Soft Bucking Nub (6mm Bucking Nub is optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
product_right_arrow.pngAccepted the 18.5mm nozzle length
product_right_arrow.pngFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
product_right_arrow.pngWisely built with a self-centering inlet to ensure the hopup unit is inserted exactly in the center of the 11.5mm inner bore ASG EVO-3 gear box outlet without wobbling
product_right_arrow.pngIncluded an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting

 

 Compatibility

product_right_arrow.png

product_right_arrow.png

ASG 2018 CZ Scorpion EVO-3 AEG

ASG 2018 CZ Scorpion EVO-3 HPA

 

 Requires
product_right_arrow.pngWearing eye protection is recommended
product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

 

 Instruction
product_right_arrow.pngInstruction Manuals are included

Data sheet

TypeScorpion
Caliber6mm Airsoft
MaterialAluminum
Main colorRed

Accessories

Questions  (4)

A partir de Christophe | 2023-12-18 22:30:58

Bonjour, pour accompagner ce bloc et un canon Prométhéus 6.03 x 501 mm, quel joint me conseillez vous ?

Powair6

Bonjour, nous vous conseillons ou un maccaron ou un super maccaron en 60 degrés. Ce sont des valeurs sures.

A partir de Chris | 2023-08-26 10:54:10

Bonjour, est-ce que l'emplacement de la roulette de réglage a une incidence sur l'insertion de la batterie dans la réplique ?

Powair6

Bonjour , non elle ne gêne pas l'insertion de la batterie .
Cordialement,

A partir de Damien | 2023-08-09 11:52:15

Ok, vous me conseillez quel joint hop UP, pour scorpion hPa?

Powair6

Bonjour;
nous vous conseillons de partir sur un macaron ou super macaron en 60° de la marque Maple leaf pour un appui plat, ou un prometheus violet pour l'appui cylindrique.
Cordialement.

A partir de Chapron | 2023-08-08 13:19:21

Bonjour, je sais que c est une nouveauté, mais pensez vous que c est mieux que celui fait par asg?

Powair6

Bonjour;
nous avons une préférence pour les pattes d'appui proposé par celui-ci. Il offre un plus large choix de joint hop-up.
Cordialement.

Page: 1
Seuls les utilisateurs enregistrés peuvent poser une question. Login