P6 550rds HPA Hi-cap Magazine for VFC / Umarex HK417 / G28 / M110 A1 -

P6 550rds HPA Hi-cap Magazine for VFC / Umarex HK417 / G28 / M110 A1

Name: P6 550rds HPA Hi-cap Magazine for VFC / Umarex HK417 / G28 / M110 A1
Brand: P6 Workshop
SKU: P6-HICAP-HK417-VFC
Price: 259.9 EUR
Availability: InStock

Reference P6-HICAP-HK417-VFC

In stock

€259.90

Product customization

Don't forget to save your customization to be able to add to cart

Valve type
250 char. max
Image 1
optional .gif .jpg .jpeg .jpe .png .webp
Image 2
optional .gif .jpg .jpeg .jpe .png .webp
Type de valve
optional 250 char. max

Save your customization

If you want to save you customization, you have to be a registrered user

Customize

Valve type

Total quantity 0

You can't add more than 1 quantities

You must add a minimum of 1 quantities

BalystiK HPA no return valve male fitting for GBB magazine EU Version
This new fitting is especially made for GBB / GBBR magazine, the air will stop immediatly once you disconnect the HPA line and will keep pressure inside the magazine, very usefull to save a lot of air !
Slim design
High flow design allowing to play in semi-auto or full auto with GBB / GBBR magazine
HEX print inside the fitting for easier installation with M3 HEX key
Magazine can be used both with HPA and GAS (if installed on another location on the mag)
Keep air inside the magazine and seals under pressure
M9X1 postive thread
EU Male HPA connector version suitable for Balystik EU version HPA lines
Instalation advice / Security warning
The fitting feature M9X1 male positive thread, so it will be necessary to use a M8 drill and M9X1 Tap
It is imperative to use high strengh chemical locking thread to ensure seal and strong build.
Professional installation by experienced gunsmith is strongly advised !
Never input more pressure than recommended by the magazine manufacturer
Kepp in mind that even disconnected the magazine have pressure and can fire a bb, never let your magazine on a replica if you don' play.
BalystiK HPA no return valve male fitting for GBB magazine EU Version
BalystiK HPA no return valve male fitting for GBB magazine US Version
This new fitting is especially made for GBB / GBBR magazine, the air will stop immediatly once you disconnect the HPA line and will keep pressure inside the magazine, very usefull to save a lot of air !
Slim design
High flow design allowing to play in semi-auto or full auto with GBB / GBBR magazine
HEX print inside the fitting for easier installation with M3 HEX key
Magazine can be used both with HPA and GAS (if installed on another location on the mag)
Keep air inside the magazine and seals under pressure
M9X1 postive thread
US Male HPA connector version for US version HPA lines
Instalation advice / Security warning
The fitting feature M9X1 male positive thread, so it will be necessary to use a M8 drill and M9X1 Tap
It is imperative to use high strengh chemical locking thread to ensure seal and strong build.
Professional installation by experienced gunsmith is strongly advised !
Never input more pressure than recommended by the magazine manufacturer
Kepp in mind that even disconnected the magazine have pressure and can fire a bb, never let your magazine on a replica if you don' play.
BalystiK HPA no return valve male fitting for GBB magazine US Version

Overview :

Total :

Share your customization with your firends

Description

This magazine gives more autonomy while taking advantage of the GBBR recoil. The HPA fitting is high flow so you run full auto without any problem.

High-capacity magazine for VFC/Umarex HK417 replicas, made in our workshop. It consists of a 550-round VFC or Tokyo Marui 417 high-capacity magazine with a winding wheel and a VFC 417 GBBR gas magazine.The two magazines are joined by a spécial maglink 3D printed magazine coupler.

About the HPA valve fitting :

“High flow” type with a large diameter for the air flow: will allow you to fire full auto without loss of charge
Anti-return system: keeps air in the magazine when disconnecting the supply hose, so possibility of using green gas also.
Choose your EU or US version

Technical details :

With this modification, the empty mag stop firing system no longer works.
Magazine is delivered assembled and tested before sending, so you will still find BBs in the hi-cap :)
Only compatible with HK417 VFC GBB replicas
Fitting installation is done with chemical sealing, it is not intended to be dismantled.
Max pressure 150 PSI

Product Details

Type: 417 / G28
Caliber: 6mm Airsoft
HPA System: Gas gun in HPA
Weight: 740gr
Material: Polymer / Metal
Colour: Black
Power source: HPA
Magazine Version: Hi-cap
Magazine capacity: 550
Output pressure: Max 150 PSI

About P6 Workshop

Our own Airsoft Workshop Brand based in Pechbonnieu France

Magazine advice

Despite everything you can read on the internet and on on the manufacturer's manual, we recommend that you never introduce silicone or grease into airsoft magazines. Greasing has a devastating effect on a replica since it will directly grease the hop-up rubber and inner barrel, resulting in a loss of precision and even more accentuated dust fixing. Never introduce chemical products such as grease, silicone spray or any other kind into the magazine, the hop-up unit, the BBs, the internal parts of the AEGs. The silicone is only used on pneumatic parts such as a gearbox cylinder or a moving O-ring. Special recommandation regarding Mid-cap Magazine :

Limit the number of bbs by 70-80% of the mid-cap capacity, never force the introduction of the BBs with a BB loader.
Too many BBs can slow down the operation of the nozzle and that can have repercussions on the trajectory of the bbs and the feed.
If you want to keep your magazine for many years, it is also imperative for not working the spring to the maximum of its capabilities.
Never store your magazine filled for a long period of use, the spring loaded for a long time may be irreparably damaged with a settling effect.
Use BBs with irreproachable sphericity