ARCTURUS AK Carbine AT-AK05

The new AK rifle from the MOS factory is a magnificent rifle fromthe AK family. And this time too, the rifle combines a modern look with precision performance. For years, MOS has gained experience, producing articles for firearms as well as for the biggest companies in the Airsoft industry.

• The replica was made with precision and care.
• The lower receiver is connected to a light MLOCK handguard
• In this model is mounted an adjustable stock type M4.
• NOTE! The replica have a unique serial number!
• Most of the external elements are made of metal.

It should be noted that, as in the original, the lower top cover, the safety selector, the trigger guard as well as the magazine lock were cold pressed from a sheet of steel. According to the original, all the front and rear bases such as the muzzle brake and the loading handle are made of metal. In addition, the strap plate and the locknuts on the butt tube are made of metal. All these metallic elements have been protected against corrosion, by an industrial method.

The gearbox and its interior are another advantage of this replica :

• It has a quick spring change system, the piston head, is on bearings. The polymer piston is fitted with steel teeth which work with high quality gears. The gears are mounted on smooth bearings to be able to support the highest loads. Only the motor gear is mounted on ball bearings to ensure that it is free to rotate at high speeds.
• Inside, we will find an electric micro-stick "Micro Switch" which is connected to low intensity wiring, preparing the replica for cooperation with Li-Po batteries.
  The use of an electric trigger eliminates the problem of burnt out contacts and improves the response time of the trigger.
• The gearbox is finished with a waterproof Teflon nozzle. It works with a metal hop-up chamber in which a 6.01 mm precision hardened steel barrel is mounted.
  The gearbox is equipped with a button to disengage the spring tension, it is placed next to the trigger. After using the replica, we can release the spring.

All the materials and solutions used to create the replica have placed MOS in the lead.

The set include:

• Replica
• Hi-cap magazine 550bb and mid 120 / 30bb