HPA M4 Magazine kit for HI-CAPA series GBB

The AMAROK magazine features a textured, rough polymer body that ensures a secure grip, even in wet conditions or when wearing gloves. Its rugged construction withstands drops and rough handling, giving players a tactical advantage in dynamic combat environments. With a 250-round capacity, the Mid-Cap Type A magazine allows for a sustained rate of fire without frequent reloading. The high-tension internal spring ensures reliable pellet feeding, even during rapid automatic fire. The wide loading port allows for fast and efficient loading.

The AMAROK magazine features a textured, rough polymer body that ensures a secure grip, even in wet conditions or when wearing gloves. Its rugged construction withstands drops and rough handling, giving players a tactical advantage in dynamic combat environments. With a 250-round capacity, the Mid-Cap Type A magazine allows for a sustained rate of fire without frequent reloading. The high-tension internal spring ensures reliable pellet feeding, even during rapid automatic fire. The wide loading port allows for fast and efficient loading.

New version 2023

The venerable PTS® Enhanced Polymer Magazine AEGhas been slightly revised for 2023. It retains all of the same features and technologies of the original EPM:

• Capacity: The EPM retains its 150round capacity and its legendary feeding consistency and reliability.
• Dupont Zytel polymer shell: This extremely rugged polymer that PTS uses in our Enhanced Polymer product line allows the EPM to withstand a considerable amount of field use and abuse. 
• Bright orange full load indicator: When the magazine is fully loaded, at the base of the see-through bullet window, an orange follower comes into view. This is a remarkable design feature unique to the EPM as it allows the end user to pick up any EPM magazine and immediately know if the magazine is filled to capacity and ready to go. It also acts a visual indicator for the user to known when to stop loading the magazine.
• Angled basepad: The bottom of the base plate has been designed with an angled surface that allows the end user to rest the gun on any flat shooting surface and have more surface contact for greater shooting stability. The angled surface is minimized to the point that it is functional, yet still comfortable in the hand when drawn from pouches and also not inhibit the closure of flaps on closed top magazine pouches. The front of the base plate has also been designed with a ribbed ledge which promotes easier extraction of the magazine from deep magazine pouches and can help the end user with correctly indexing the magazine.  Base dot matrix pattern allows for magazine customization and identification.
• Continuous magazine well guides that reduce snagging when the magazine is drawn from and reinserted into pouches.
• A wide range of compatibility: It is compatible with Version 2 based M4 AEGs by TM, KWA, PTS PDR-C, PTS ERG series, PTS Masada, G&P, the VFC 416, the CA 416 and the AMOEBA AM Variants.
• Easy disassembly for general maintenance and parts replacement

Features:

1. BBs bullet full load indicator
2. Enhanced Polymer Baseplate with angled surface and dot matrix
3. Floorplate compatible with PMAG® RANGER PLATE™ – GEN M2 MOE® 5.56,
4. original EPM Rubberzed floorplate
5. High efficiency compression spring
6. Transparent magazine inner part for easy check up and repairing
7. Complex size BB STOPPER for better compatibility
8. Unique magazine mag well guide that reduce snagging
9. The texture along the spins have been changed to ridges for even more positive tactility 

Specification: 

• Color – Black
• Dimension – 1020 x 305 x 95mm (w/ packaging)
• Weight – 189g
• Material – Aluminum Upper & Lower Receivers 

Revisions:

• The angled baseplate with angled surface is now entirely Dupont Zytel polymer for even greater ruggedness. The floorplate is still compatible with real steel Magpul PMAG® RANGER PLATE™ – GEN M2 MOE® 5.56 and the original EPM rubber overmolded floorplate.
• The EPM front and back spine has been revised with our current design language with the EPM1 style ridges which provide compatibility with Magpul Mag Couplers and, along with the narrow strip of texturing along the length of the EPM body, improved grip and tactility

New version 2023

The venerable PTS® Enhanced Polymer Magazine AEGhas been slightly revised for 2023. It retains all of the same features and technologies of the original EPM:

• Capacity: The EPM retains its 150round capacity and its legendary feeding consistency and reliability.
• Dupont Zytel polymer shell: This extremely rugged polymer that PTS uses in our Enhanced Polymer product line allows the EPM to withstand a considerable amount of field use and abuse. 
• Bright orange full load indicator: When the magazine is fully loaded, at the base of the see-through bullet window, an orange follower comes into view. This is a remarkable design feature unique to the EPM as it allows the end user to pick up any EPM magazine and immediately know if the magazine is filled to capacity and ready to go. It also acts a visual indicator for the user to known when to stop loading the magazine.
• Angled basepad: The bottom of the base plate has been designed with an angled surface that allows the end user to rest the gun on any flat shooting surface and have more surface contact for greater shooting stability. The angled surface is minimized to the point that it is functional, yet still comfortable in the hand when drawn from pouches and also not inhibit the closure of flaps on closed top magazine pouches. The front of the base plate has also been designed with a ribbed ledge which promotes easier extraction of the magazine from deep magazine pouches and can help the end user with correctly indexing the magazine.  Base dot matrix pattern allows for magazine customization and identification.
• Continuous magazine well guides that reduce snagging when the magazine is drawn from and reinserted into pouches.
• A wide range of compatibility: It is compatible with Version 2 based M4 AEGs by TM, KWA, PTS PDR-C, PTS ERG series, PTS Masada, G&P, the VFC 416, the CA 416 and the AMOEBA AM Variants.
• Easy disassembly for general maintenance and parts replacement

Features:

1. BBs bullet full load indicator
2. Enhanced Polymer Baseplate with angled surface and dot matrix
3. Floorplate compatible with PMAG® RANGER PLATE™ – GEN M2 MOE® 5.56,
4. original EPM Rubberzed floorplate
5. High efficiency compression spring
6. Transparent magazine inner part for easy check up and repairing
7. Complex size BB STOPPER for better compatibility
8. Unique magazine mag well guide that reduce snagging
9. The texture along the spins have been changed to ridges for even more positive tactility 

Specification: 

• Dimension – 1020 x 305 x 95mm (w/ packaging)
• Weight – 189g
• Material – Aluminum Upper & Lower Receivers 

Revisions:

• The angled baseplate with angled surface is now entirely Dupont Zytel polymer for even greater ruggedness. The floorplate is still compatible with real steel Magpul PMAG® RANGER PLATE™ – GEN M2 MOE® 5.56 and the original EPM rubber overmolded floorplate.
• The EPM front and back spine has been revised with our current design language with the EPM1 style ridges which provide compatibility with Magpul Mag Couplers and, along with the narrow strip of texturing along the length of the EPM body, improved grip and tactility

Quantity discount available

The PTS Enhanced Polymer Magazine is their new 150 Round Mid-capacity Polymer Magazine for AEGs. Externally it features a Dupont Polymer shell, with recessed panels for better grip, and unique magazine well guides that reduce snagging. When the magazine is fully loaded, at the base of the see-through bullet window, an orange follower comes into view as well as the fake 556 bullets which only for show. It allows the end user to pick up any EPM magazine and immediately know if the magazine is filled to capacity and ready to go as it also acts a visual indicator for the user to show that it's full. The bottom of the base plate has been designed with an angled surface and a rubber overmold on the lower face. This combination of features allows the end user to rest the gun on any flat shooting platform and have more surface contact with better traction and therefore greater stability.

It is compatible with Version 2 M4 AEGs such as:

• Tokyo Marui,
• KWA,
• PTS PDR-C,
• PTS ERGs,
• PTS Masada,
• G&P AEGs,
• VFC 416,
• And the CA 416.

Features:

• 150 Round Capacity
• Orange Full Indicator
• Rubber Floorplate
• Durable DuPont Polymer material

The PTS EPM1-S AEG magazine, made with the same technology as our EPM1, is a 20R length short M4 magazine that holds an incredible 170 round bb capacity and offers the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more. The magazine is available in Black and Dark Earth.

About the EPM1

The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:

• The EPM1 is the First collaborative development between PTS and Odin Innovations
• The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 170 bb capacity
• The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
• The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

Features :

• Dupont Zytel® polymer shell
• Orange mag level indicator
• High efficiency compression spring
• Low friction internal shell
• Unique magazine mag well guide that reduce snagging
• EP dot pattern texture for better grip
• New polymer baseplate with angled surface and dot matrix
• New design follower prevents bbs jam

Specifications :

• Material – Dupont™ Zytel High Performance Reinforced Polymer
• Compatibility : Tokyo Marui Style AR-15 AEG,G&P AR-15 AEG, PTS ERG AR-15 AEG, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft,CA AR-15 & 416 AEG Airsoft,Krytac,AMOEBA AM Variants AEG Airsoft

Disclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.

We draw your attention for some important points before placing your order :

• Keeping a magazine fully compressed for an extended period of time creates a risk of spring damage. No guarantee will be made for sagging springs.
• Use a flawless BBS with perfect smoothness. The internal system of the mag  cannot become blocked unless two BBS get stuck each other. In that case no warranty for product manufacturing defect can be claimed.
• The capacity is a manufacturer's announcement, This capacity is difficult to reach because the spring is extremly powerful. Powair6 advises to self limit the quantity to 220 BBs for EPM1 and 150 BBs for EPM1-S

The PTS EPM1-S AEG magazine, made with the same technology as our EPM1, is a 20R length short M4 magazine that holds an incredible 170 round bb capacity and offers the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more. The magazine is available in Black and Dark Earth.

About the EPM1

The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:

• The EPM1 is the First collaborative development between PTS and Odin Innovations
• The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 170 bb capacity
• The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
• The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance

Features :

• Dupont Zytel® polymer shell
• Orange mag level indicator
• High efficiency compression spring
• Low friction internal shell
• Unique magazine mag well guide that reduce snagging
• EP dot pattern texture for better grip
• New polymer baseplate with angled surface and dot matrix
• New design follower prevents bbs jam

Specifications :

• Material – Dupont™ Zytel High Performance Reinforced Polymer
• Compatibility : Tokyo Marui Style AR-15 AEG,G&P AR-15 AEG, PTS ERG AR-15 AEG, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft,CA AR-15 & 416 AEG Airsoft,Krytac,AMOEBA AM Variants AEG Airsoft

Disclaimer: This product is for airsoft, training, and simulation purposes only.  Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury.  PTS will not accept any responsibility or liability for misuse of this product.

We draw your attention for some important points before placing your order :

• Keeping a magazine fully compressed for an extended period of time creates a risk of spring damage. No guarantee will be made for sagging springs.
• Use a flawless BBS with perfect smoothness. The internal system of the mag  cannot become blocked unless two BBS get stuck each other. In that case no warranty for product manufacturing defect can be claimed.
• The capacity is a manufacturer's announcement, This capacity is difficult to reach because the spring is extremly powerful. Powair6 advises to self limit the quantity to 220 BBs for EPM1 and 150 BBs for EPM1-S

The EPM1-RX is a slight revision of the venerable but still industry-leading PTS EPM1 250 round midcap magazine. The primary revision is brand new tooling for the internal shell which leads to more precise dimensions and smoother bb channel. The EPM1-RX internal shell is distinguished by its grey color and EPM1-RX markings on its surface.

Caracteristics:

• Material: Dupont-Zytel high performance reinforced polymer
• Capacity: 250 rounds
• Dimensions: 180x72x26mm
• Weight: 207gr approx. (empty)
• Angled Basepad: allows you to lean on it for more stability when shooting
• High efficiency compressor spring
• The magazine features a positive texture for better grip and tactile feel. It allows to be compatible with the Magpul Maglink® Coupler.
• Enhanced magazine follower
• Compatible with electronic loader
• Compatibility: Tokyo Marui Style AR-15 AEG Airsoft, G&P AR-15 AEG Airsoft, KWA AR-15 AEG & ERG Airsoft, PTS ERG AR-15 Airsoft, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft, CA AR-15 & 416 AEG Airsoft, AMOEBA AM Variants AEG Airsoft

The EPM1-RX is a slight revision of the venerable but still industry-leading PTS EPM1 250 round midcap magazine. The primary revision is brand new tooling for the internal shell which leads to more precise dimensions and smoother bb channel. The EPM1-RX internal shell is distinguished by its grey color and EPM1-RX markings on its surface.

Caracteristics:

• Material: Dupont-Zytel high performance reinforced polymer
• Capacity: 250 rounds
• Dimensions: 180x72x26mm
• Weight: 207gr approx. (empty)
• Angled Basepad: allows you to lean on it for more stability when shooting
• High efficiency compressor spring
• The magazine features a positive texture for better grip and tactile feel. It allows to be compatible with the Magpul Maglink® Coupler.
• Enhanced magazine follower
• Compatible with electronic loader
• Compatibility: Tokyo Marui Style AR-15 AEG Airsoft, G&P AR-15 AEG Airsoft, KWA AR-15 AEG & ERG Airsoft, PTS ERG AR-15 Airsoft, PTS Masada AEG, PTS PDR-C AEG, VFC AR-15 & HK416 AEG Airsoft, CA AR-15 & 416 AEG Airsoft, AMOEBA AM Variants AEG Airsoft

This magazine is compatible with the AR15/M4/M16/416/SCAR16/SA80/AR18 serie replica from brand like CYMA, APS, Dboys, JG, A&K, VFC. Also compatible with AEG in Tokyo Marui standard. Magazine with a modern design that improves the grip, ensuring faster reloading and magazine handling. Made of durable polymer proven in the battle. Feature a transparent window with dummy cartridges and a rubber floor plate that protects against damage.

Magazine are delivered in foam packaging

Bo manufacture / Lonex 200 rounds mid cap polymer magazine for M4 AEG

- Spring operated

- 200 rounds capacity !

Bo manufacture / Lonex 200 rounds mid cap polymer magazine for M4 AEG

- Spring operated

- 200 rounds capacity !

Bo manufacture / Lonex 200 rounds mid cap polymer magazine for M4 AEG

- Spring operated

- 200 rounds capacity !

• Durable polymer shell
• High tensile strength spring ensures reliable feeding
• 150 round capacity
• TTI-branded extended baseplate with engraved logo (does not function as a magazine extension)

• Durable polymer shell
• High tensile strength spring ensures reliable feeding
• 150 round capacity
• TTI-branded extended baseplate with engraved logo (does not function as a magazine extension)

High-strength polymer Mid-cap magazine type 5.56×45mm under Strike industries (EMG) license for airsoft electric rifles for AR15, M4 airsoft rifles series. The capacity of the charger 210 bbs.

30-Round Real-Cap 130-Round Mid-Cap mode switchable. One button easy switch from mid-cap to real magazine capacity. One piece magazine shell providing more durability. Made of fiber reinforced polymer. Applied with high strength material providing high-quality external texture. Special design of follower makes sure no BB left after the final shot.

Compatible with most AEG at the market, including Arcturus, Ares, Cyma, APS, GG, EL, Arcturus etc.

• Polymer magazine
• Switchable from Low-cap (20 rds) to Mid-cap (70rds)
• Compatible M4 AEG

• Weight: 158 grams
• Size: 170 x 65 x 25 mm
• Loading Capacity: 150 Rounds
• Material High Strength Engineering Plastic

The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The mid-cap version holds 120 rounds.

The QMAG from VFC is a new magazine line by VFC that is entirely differnt to what they had before. The QMAG is a polymer magazine that fits all Umarex VFC M4 AEG series and 416 AEG series magwell. It has diamond hexagonal shape composite reinforced ribs and anti-skid textured surface to ensure the magazine has enough grip on it in every condition. The floor plate is also designed to be reinforced in structure for higher durability and shaped to be easier to be pulled out from your magazine pouches. The mid-cap version holds 120 rounds.