Pack

P6 Workshop 20rds HPA magazine for H&K M110 A1 -

P6 Workshop 20rds HPA magazine for H&K M110 A1

Name: P6 Workshop 20rds HPA magazine for H&K M110 A1
Brand: P6 Workshop
SKU: P6-HPA-2.6490.1
Price: 129.9 EUR
Availability: InStock

Reference P6-HPA-2.6490.1

In stock

€129.90

FAST SHIPPING

REAL TIME STOCK

SECURE PAYMENT

Save your customization

If you want to save you customization, you have to be a registrered user

Customize

Valve type

Total quantity 0

You can't add more than 1 quantities

You must add a minimum of 1 quantities

BalystiK HPA no return valve male fitting for GBB magazine EU Version
This new fitting is especially made for GBB / GBBR magazine, the air will stop immediatly once you disconnect the HPA line and will keep pressure inside the magazine, very usefull to save a lot of air !
Slim design
High flow design allowing to play in semi-auto or full auto with GBB / GBBR magazine
HEX print inside the fitting for easier installation with M3 HEX key
Magazine can be used both with HPA and GAS (if installed on another location on the mag)
Keep air inside the magazine and seals under pressure
M9X1 postive thread
EU Male HPA connector version suitable for Balystik EU version HPA lines
Instalation advice / Security warning
The fitting feature M9X1 male positive thread, so it will be necessary to use a M8 drill and M9X1 Tap
It is imperative to use high strengh chemical locking thread to ensure seal and strong build.
Professional installation by experienced gunsmith is strongly advised !
Never input more pressure than recommended by the magazine manufacturer
Kepp in mind that even disconnected the magazine have pressure and can fire a bb, never let your magazine on a replica if you don' play.
BalystiK HPA no return valve male fitting for GBB magazine EU Version
BalystiK HPA no return valve male fitting for GBB magazine US Version
This new fitting is especially made for GBB / GBBR magazine, the air will stop immediatly once you disconnect the HPA line and will keep pressure inside the magazine, very usefull to save a lot of air !
Slim design
High flow design allowing to play in semi-auto or full auto with GBB / GBBR magazine
HEX print inside the fitting for easier installation with M3 HEX key
Magazine can be used both with HPA and GAS (if installed on another location on the mag)
Keep air inside the magazine and seals under pressure
M9X1 postive thread
US Male HPA connector version for US version HPA lines
Instalation advice / Security warning
The fitting feature M9X1 male positive thread, so it will be necessary to use a M8 drill and M9X1 Tap
It is imperative to use high strengh chemical locking thread to ensure seal and strong build.
Professional installation by experienced gunsmith is strongly advised !
Never input more pressure than recommended by the magazine manufacturer
Kepp in mind that even disconnected the magazine have pressure and can fire a bb, never let your magazine on a replica if you don' play.
BalystiK HPA no return valve male fitting for GBB magazine US Version

Overview :

Total :

Share your customization with your firends

Description

Stay fully loaded with these spare HPA magazine for Umarex H&K M110 A1

Umarex H&K M110 A1 20rds gaz magazine tuned in HPA by our Workshop
Suitable for Umarex H&K M110 A1 only
HPA provide much more better consistency than gas !
Available in US or EU version, please make your choice before adding to cart
Can be used with Gas or HPA thanks to the use of the Balystik no return valve.
Max 140 PSI
Please note that for added security the high flow fitting is permanently sealed to the magazine and cannot be unscrewed.

Product Details

Type: HK
Caliber: 6mm Airsoft
Weight: 450g
Colour: Black
Power source: HPA
Magazine capacity: 20

About P6 Workshop

Our own Airsoft Workshop Brand based in Pechbonnieu France

Reviews

No reviews at this time.

Magazine advice

Despite everything you can read on the internet and on on the manufacturer's manual, we recommend that you never introduce silicone or grease into airsoft magazines. Greasing has a devastating effect on a replica since it will directly grease the hop-up rubber and inner barrel, resulting in a loss of precision and even more accentuated dust fixing. Never introduce chemical products such as grease, silicone spray or any other kind into the magazine, the hop-up unit, the BBs, the internal parts of the AEGs. The silicone is only used on pneumatic parts such as a gearbox cylinder or a moving O-ring. Special recommandation regarding Mid-cap Magazine :

Limit the number of bbs by 70-80% of the mid-cap capacity, never force the introduction of the BBs with a BB loader.
Too many BBs can slow down the operation of the nozzle and that can have repercussions on the trajectory of the bbs and the feed.
If you want to keep your magazine for many years, it is also imperative for not working the spring to the maximum of its capabilities.
Never store your magazine filled for a long period of use, the spring loaded for a long time may be irreparably damaged with a settling effect.
Use BBs with irreproachable sphericity