> >>>P6 Workshop Kriss Vector series custom AEG
P6 Workshop Kriss Vector series custom AEG - View larger
Previous Next

P6 Workshop Kriss Vector series custom AEG

P6-AEG-KTAEG-VECTOR

New product

Build time 3 - 6 days

Moyenne des votes pour ce produit
5.0 / 5
Moyenne : 5.0 / 5
Basée sur 2 avis clients.

Configure

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

Choose your replica version. P6 Workshop Team will prepare, customize, adjust and test your custom replica before shipping, a 130€ fees is asked for this service and added to the replica base price.

Please not that only classic short kriss versions can be combined with the silencer option.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Krytac Kriss Vector GEN2 AEG

    Today KRYTAC®, KRISS USA’s brand of premium performance airsoft and training products, launches the first and only officially licensed KRISS® Vector AEG. The all-new AEG is the first of its kind, and an exact replica of the KRISS® Vector SMG Submachine Gun. The dimensions of the all-new KRYTAC® KRISS® Vector AEG are a 1:1 scale to its firearms counterpart. Additional external features include the side folding stock, ambidextrous safety and selector switch, MIL-STD 1913 picatinny top rail, MIL-STD 1913 picatinny bottom accessory rail, and a Trident flash hider mounted to the 14mm counter clock wise threaded barrel.

    Internally, the AEG is powered by a vertically oriented mechbox, with V2 compatible gears, piston, piston head, and cylinder. A short type motor pulls the AEG main spring, which is guided by a quick detach metal ball bearing spring guide. Semi, two round burst, and fully automatic fire modes are controlled by a micro-switch trigger and electronic control board with integrated 3034 MOSFET. Additional internal features include the famous KRYTAC® rotary hop up, bucking, and a 155mm inner barrel. Feeding the KRISS® Vector AEG is a 95 rounds mid capacity magazine.

    Factory standard accessories include the DEFIANCE® front and rear folding polymer sights, a 7-slot MIL-STD 1913 picatinny side rail section, and one magazine.

    Comes with one 95 rounds mid cap magazine and one 20mm rail

    External Features:

        Licensed KRISS Vector GEN II housing
        Licensed KRISS Vector GEN II folding stock
        Licensed DEFIANCE flip up iron sights
        Ambidextrous fire selector
        Semi, two-round burst, full auto fire modes
        Ambidextrous safety
        KRISS Vector GEN II pivoting trigger
        MIL-STD 1913 picatinny top rail
        MIL-STD 1913 picatinny bottom rail

    Internal Features:

        8mm VECTOR gearbox
        Integrated Krytac FET system
        Electronic trigger
        Quick change spring
        Padded cylinder head
        Relief cut cylinder window
        Adjustable rotary hop-up
        Temperature and wear resistant bucking
        Krytac 30K neodymium magnets, high torque, short type motor

    Manufacturer: Krytac / Licensed by KRISS USA

    729,92 €
    Krytac Kriss Vector GEN2 AEG

    729,92 €

  • Krytac Kriss Vector AEG Dual-tone GEN2

    Today KRYTAC®, KRISS USA’s brand of premium performance airsoft and training products, launches the first and only officially licensed KRISS® Vector AEG. The all-new AEG is the first of its kind, and an exact replica of the KRISS® Vector SMG Submachine Gun. The dimensions of the all-new KRYTAC® KRISS® Vector AEG are a 1:1 scale to its firearms counterpart. Additional external features include the side folding stock, ambidextrous safety and selector switch, MIL-STD 1913 picatinny top rail, MIL-STD 1913 picatinny bottom accessory rail, and a Trident flash hider mounted to the 14mm counter clock wise threaded barrel.

    Internally, the AEG is powered by a vertically oriented mechbox, with V2 compatible gears, piston, piston head, and cylinder. A short type motor pulls the AEG main spring, which is guided by a quick detach metal ball bearing spring guide. Semi, two round burst, and fully automatic fire modes are controlled by a micro-switch trigger and electronic control board with integrated 3034 MOSFET. Additional internal features include the famous KRYTAC® rotary hop up, bucking, and a 155mm inner barrel. Feeding the KRISS® Vector AEG is a 95 rounds mid capacity magazine.

    Factory standard accessories include the DEFIANCE® front and rear folding polymer sights, a 7-slot MIL-STD 1913 picatinny side rail section, and one magazine.

    Comes with one 95 rounds mid cap magazine and one 20mm rail

    External Features:

        Licensed KRISS Vector GEN II housing
        Licensed KRISS Vector GEN II folding stock
        Licensed DEFIANCE flip up iron sights
        Ambidextrous fire selector
        Semi, two-round burst, full auto fire modes
        Ambidextrous safety
        KRISS Vector GEN II pivoting trigger
        MIL-STD 1913 picatinny top rail
        MIL-STD 1913 picatinny bottom rail

    Internal Features:

        8mm VECTOR gearbox
        Integrated Krytac FET system
        Electronic trigger
        Quick change spring
        Padded cylinder head
        Relief cut cylinder window
        Adjustable rotary hop-up
        Temperature and wear resistant bucking
        Krytac 30K neodymium magnets, high torque, short type motor

    Manufacturer: Krytac / Licensed by KRISS USA

    729,92 €
    Krytac Kriss Vector AEG Dual-tone GEN2

    729,92 €

  • Krytac Kriss Vector AEG Dark Earth GEN2

    Today KRYTAC®, KRISS USA’s brand of premium performance airsoft and training products, launches the first and only officially licensed KRISS® Vector AEG. The all-new AEG is the first of its kind, and an exact replica of the KRISS® Vector SMG Submachine Gun. The dimensions of the all-new KRYTAC® KRISS® Vector AEG are a 1:1 scale to its firearms counterpart. Additional external features include the side folding stock, ambidextrous safety and selector switch, MIL-STD 1913 picatinny top rail, MIL-STD 1913 picatinny bottom accessory rail, and a Trident flash hider mounted to the 14mm counter clock wise threaded barrel.

    Internally, the AEG is powered by a vertically oriented mechbox, with V2 compatible gears, piston, piston head, and cylinder. A short type motor pulls the AEG main spring, which is guided by a quick detach metal ball bearing spring guide. Semi, two round burst, and fully automatic fire modes are controlled by a micro-switch trigger and electronic control board with integrated 3034 MOSFET. Additional internal features include the famous KRYTAC® rotary hop up, bucking, and a 155mm inner barrel. Feeding the KRISS® Vector AEG is a 95 rounds mid capacity magazine.

    Factory standard accessories include the DEFIANCE® front and rear folding polymer sights, a 7-slot MIL-STD 1913 picatinny side rail section, and one magazine.

    Comes with one 95 rounds mid cap magazine and one 20mm rail

    External Features:

    • Licensed KRISS Vector GEN II housing
    • Licensed KRISS Vector GEN II folding stock
    • Licensed DEFIANCE flip up iron sights
    • Ambidextrous fire selector
    • Semi, two-round burst, full auto fire modes
    • Ambidextrous safety
    • KRISS Vector GEN II pivoting trigger
    • MIL-STD 1913 picatinny top rail
    • MIL-STD 1913 picatinny bottom rail

    Internal Features:

    • 8mm VECTOR gearbox
    • Integrated Krytac FET system
    • Electronic trigger
    • Quick change spring
    • Padded cylinder head
    • Relief cut cylinder window
    • Adjustable rotary hop-up
    • Temperature and wear resistant bucking
    • Krytac 30K neodymium magnets, high torque, short type motor

    Manufacturer: Krytac / Licensed by KRISS USA

    704,92 €
    Krytac Kriss Vector AEG Dark Earth GEN2

    704,92 €

  • Krytac Kriss Vector AEG Alpine white limited edition GEN2

    The officially licensed KRISS® Vector AEG is an exact replica of the KRISS® Vector SMG Submachine Gun. The dimensions of the KRYTAC® KRISS® Vector AEG are a 1:1 scale to its firearms counterpart. Additional external features include the side folding stock, ambidextrous safety and selector switch, MIL-STD 1913 picatinny top rail, MIL-STD 1913 picatinny bottom accessory rail, and a Trident flash hider mounted to the 14mm counter clock wise threaded barrel. Internally, the AEG is powered by a vertically oriented mechbox, with V2 compatible gears, piston, piston head, and cylinder. A short type motor pulls the AEG main spring, which is guided by a quick detach metal ball bearing spring guide. Semi, two round burst, and fully automatic fire modes are controlled by a micro-switch trigger and electronic control board with integrated 3034 MOSFET. Additional internal features include the famous KRYTAC® rotary hop up, bucking, and a 155mm inner barrel. Feeding the KRISS® Vector AEG is a 95 rounds mid capacity magazine.

    External Features:

    • Licensed KRISS Vector GEN II housing Alpine White Edition Krytac
    • M4 Stock tube and adjustable stock Alpine White Edition Krytac
    • RIS Alpine White Edition Krytac
    • Licensed DEFIANCE flip up iron sights
    • Ambidextrous fire selector
    • Semi, two-round burst, full auto fire modes
    • Ambidextrous safety
    • KRISS Vector GEN II pivoting trigger
    • MIL-STD 1913 picatinny top rail
    • MIL-STD 1913 picatinny bottom rail

    Internal Features:

    • 8mm VECTOR gearbox
    • Integrated Krytac FET system
    • Electronic trigger
    • Quick change spring
    • Padded cylinder head
    • Relief cut cylinder window
    • Adjustable rotary hop-up
    • Temperature and wear resistant bucking
    • Krytac 30K neodymium magnets, high torque, short type motor

    Special version Alpine White Edition comes with :

    • 95 rds mid cap magazine
    • 50 rds mid cap magazine
    • Battery extension
    • Dean connector
    • Dean to mini tamiya converter
    • Certificate of authenticity
    • Please note that the stock tube is not foldable
    796,58 €
    Krytac Kriss Vector AEG Alpine white limited edition GEN2

    796,58 €

  • Krytac Kriss Vector with Mock Suppressor

    External Features

    • Licensed KRISS Vector GEN II Housing
    • Licensed DEFIANCE® Flip Up Iron Sights
    • Ambidextrous Fire Selector
    • Semi, Two-Round Burst, and Full Auto Fire Modes
    • Ambidextrous Safety
    • MIL-STD 1913 Picatinny Top Rail
    • MIL-STD 1913 Picatinny Bottom rail

    Internal Features

    • 280mm Inner Barrel
    • Vector Mechbox
    • Integrated FET System
    • Electronic Trigger
    • Quick Spring Change
    • Padded Cylinder Head
    • Relief-cut Cylinder Window
    • Adjustable Rotary Hop-Up
    • Temperature And Wear Resistant Hop-Up Bucking
    • KRYTAC 30K Neodymium Magnets, High-Torque, Short Type Motor

    Your Krytac Kriss Vector comes with a 95 rds mid cap magazine

    729,92 €
    Krytac Kriss Vector with Mock Suppressor

    729,92 €

Choose your output power, value in FPS with 0.20gr BBs. Please note : FPS may vary, we cannot garantee exact FPS asked, it will be a range. For low power configuration please note that the cylinder can be modified.

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • 270 FPS

    270 FPS

  • 280 FPS

    280 FPS

  • 290 FPS

    290 FPS

  • 300 FPS

    300 FPS

  • 310 FPS

    310 FPS

  • 320 FPS

    320 FPS

  • 330 FPS

    330 FPS

  • 340 FPS

    340 FPS

  • 350 FPS

    350 FPS

  • 360 FPS

    360 FPS

  • 370 FPS

    370 FPS

  • 380 FPS

    380 FPS

  • 390 FPS

    390 FPS

  • 400 FPS

    400 FPS

  • 410 FPS

    410 FPS

  • 420 FPS

    420 FPS

  • 430 FPS

    430 FPS

Choose Your piston. Basically, we advise you to choose the Balystik which is very versatile and resistant, but you can choose another model ! We make AOE modification of the piston + piston head whatever the model chosen in order to allow a perfect start of the cycle between the sector gear and the first piston teeth.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Lightweight 14 teeth Piston

    • Essential part for upgrading your Airsoft AEG
    • Polymer Construction Lightweight piston with high impact-durability
    • 14 Full Teeth rack gear made of metal
    • Suitable for mainstream high-speed tune-up and has excellent operational characteristics
    • The Grease grooves cut on the rail-guides keep it lubricated
    • Suitable for standard AEG gearbox Tokyo Marui and clones
    5,75 €
    Lightweight 14 teeth Piston

    5,75 €

  • Balystik polycarbonate 14 steel teeth piston for AEG

    • Balystik polycarbonate 14 teeth steel piston
    • Extremely durable body made of polycarbonate
    • 14 Full Teeth rack gear made of metal
    • 16gr only
    • Suitable for all configuration from high speed to high torque
    • Suitable for standard AEG gearbox Tokyo Marui and clones
    5,75 €
    Balystik polycarbonate 14 steel teeth piston for AEG

    5,75 €

  • Balystik ULTRALIGHT 14 steel teeth piston for AEG

    • Balystik ULTRALIGHT 14 teeth steel piston
    • Ultralightweight "cheese edition" with 7 openings
    • Extremely durable reinforced POM construction
    • 14 Full Teeth rack gear made of metal
    • 13,3gr only
    • Suitable for high speed and semi automatic shooting with high rate trigger response
    • Suitable for standard AEG gearbox Tokyo Marui and clones
    5,75 €
    Balystik ULTRALIGHT 14 steel teeth piston for AEG

    5,75 €

  • POINT POLICARBON PISTON WITH 14 STEEL TEETH

    8,25 €
    POINT POLICARBON PISTON WITH 14 STEEL TEETH

    8,25 €

  • FPS Softair Full Metal Teeth light Piston

    FPS is proud to present the first lightened piston with 100% Made in Italy technopolymer body and all metal teeth.

    For the material of the piston the POM C was chosen, a technopolymer with high mechanical performances and a very low friction coefficient because it is self lubricating. The rack has been manufactured using MIM (Metal Injection Molding) technology, because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed. The type of metal injected is SAE 4650 which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder. Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    9,92 €
    FPS Softair Full Metal Teeth light Piston

    9,92 €

  • FPS Softair Full Metal Teeth Piston

    FPS is proud to present the first piston with 100% Made in Italy technopolymer body and all metal teeth.

    For the material of the piston the POM C was chosen, a technopolymer with high mechanical performances and a very low friction coefficient because it is self lubricating. The rack has been manufactured using MIM (Metal Injection Molding) technology, because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed. The type of metal injected is SAE 4650 which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder. Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    9,92 €
    FPS Softair Full Metal Teeth Piston

    9,92 €

  • FPS Softair ZERO-SHOCK Lightened 14 Teeth Piston

    FPS is proud to present the first ZERO-SHOCK lightened piston with 100% Made in Italy technopolymer body and full metal teeth. This system patented by Fps allows to attenuate the stresses that the rack transmits to the piston body and it makes the assembly enormously more resistant and reliable than a normal piston.

    For the material of the piston was chosen a reinforced technopolymer with added elastomer with high mechanical performances and a very low friction coefficient. The rack has been manufactured using MIM (Metal Injection Molding) technology because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed.


    The type of metal injected is SAE 4650 + HRC38-42 hardening treatment which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder.

    Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    11,58 €
    FPS Softair ZERO-SHOCK Lightened 14 Teeth Piston

    11,58 €

  • FPS Softair ZERO-SHOCK 14 Teeth Piston

    FPS is proud to present the first ZERO-SHOCK piston with 100% Made in Italy technopolymer body and full metal teeth. This system patented by Fps allows to attenuate the stresses that the rack transmits to the piston body and it makes the assembly enormously more resistant and reliable than a normal piston.

    For the material of the piston was chosen a reinforced technopolymer with added elastomer with high mechanical performances and a very low friction coefficient. The rack has been manufactured using MIM (Metal Injection Molding) technology because this production process guarantees dimensional precision and strength equal to those of solid machining. The rack is presented with the second missing tooth and with the third already lowered by 3 tenths of a millimeter because this configuration predisposes the piston itself for a correct angle of engagement (AOE) and makes it suitable for high speed.


    The type of metal injected is SAE 4650 + HRC38-42 hardening treatment which is currently considered the best material on the market for this type of use. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time. The rack seat is decentralized to favor the coupling between the piston teeth and those of the sector gear. The longitudinal reinforcements at the sides of the teeth increase the robustness of the piston and avoid contact of the rack with the inner wall of the cylinder.

    Special ribs decrease the contact surface between the spring and the internal part of the piston body and consequently also the friction between metal and technopolymer is decreased during contraction and elongation due to the firing cycle.

    100% MADE IN ITALY
    100% COMPATIBLE MARUI

    11,58 €
    FPS Softair ZERO-SHOCK 14 Teeth Piston

    11,58 €

  • SHS 15 steel teeth piston for AEG - Blue

    • High Strength Materials
    • Steel Teeth
    • Multi-Platform Compatibility
    5,75 €
    SHS 15 steel teeth piston for AEG - Blue

    5,75 €

  • SHS 15 steel teeth piston for AEG - Purple

    • High Strength Materials
    • Steel Teeth
    • Multi-Platform Compatibility
    5,75 €
    SHS 15 steel teeth piston for AEG - Purple

    5,75 €

Choose your piston head. Basically, we advise you to choose the Balystik CNC aluminum bearing Piston head model which is very versatile and resistant, but you can choose another model ! We make AOE modification of the piston + piston head whatever the model chosen in order to allow a perfect start of the cycle between the sector gear and the first piston teeth.

  • Balystik CNC aluminum bearing Piston head

    This piston head has 8 ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each piston head is made of CNC aluminium and it is also anodized for smooth surface finish. This is the most advanced version with 11.8gr only, 8 ventilation holes for higher speed and rate of fire, ball-bearing and excellent seal.

    • Essential part for upgrading your Airsoft AEG
    • Made of CNC aluminum with hard anodize
    • Ball bearing system help reduce spring torsion
    • 8 Holes ventilation
    • 11.8gr only
    • Suitable for all configurations from high-speed to high torque set-ups
    • Suitable for standard AEG gearbox Tokyo Marui and clones
    4,92 €
    Balystik CNC aluminum bearing Piston head

    4,92 €

  • SHS Aluminum ventilated piston head 6 holes - red

    Piston head HI-FLOW mounted with a bearing. The piston head has 6 holes allowing perfect replica cycle and a optimal compression of the seal rubber in the cylinder.

    5,83 €
    SHS Aluminum ventilated piston head 6 holes - red

    5,83 €

  • SHS Aluminum ventilated piston head 8 holes - blue

    Piston head HI-FLOW mounted with a bearing. The piston head has 8 holes allowing perfect replica cycle and a optimal compression of the seal rubber in the cylinder.
    5,83 €
    SHS Aluminum ventilated piston head 8 holes - blue

    5,83 €

  • SHS Aluminum ventilated piston head 8 holes - red

    Piston head HI-FLOW mounted with a bearing. The piston head has 8 holes allowing perfect replica cycle and a optimal compression of the seal rubber in the cylinder.
    5,83 €
    SHS Aluminum ventilated piston head 8 holes - red

    5,83 €

  • FPS Softair POM piston head for high rof and silence (TPAVP)

    POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (TPAVP). It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass.

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    8,25 €
    FPS Softair POM piston head for high rof and silence (TPAVP)

    8,25 €

  • FPS Softair POM piston head for high rof and silence (XPAVP)

    POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (XPAVP). It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass.

    Technical specifications:

    Weight: 5.56 grams (with technopolymer washer)

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    9,08 €
    FPS Softair POM piston head for high rof and silence (XPAVP)

    9,08 €

  • FPS Softair double o-ring ball bearing AEG Piston Head

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (TPGE).

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 6 ventilation holes. This piston head is the most traditional of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision.
    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.
    Compatibility :

    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :

    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...


    Weight: 11.9 grams
    100% MARUI COMPATIBLE
    100% MADE IN ITALY
    9,92 €
    FPS Softair double o-ring ball bearing AEG Piston Head

    9,92 €

  • FPS Softair double o-ring ball bearing light Piston Head

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (TPPE).

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision.

    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :

    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :

    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    Weight: 11.3 grams
    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    9,92 €
    FPS Softair double o-ring ball bearing light Piston Head

    9,92 €

  • FPS Softair double o-ring ball bearing high speed Piston Head

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head Advanced Type (TPAVN).

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder.  This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision.

    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :

    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :

    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    Weight: 11.2 grams

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    10,75 €
    FPS Softair double o-ring ball bearing high speed Piston Head

    10,75 €

  • FPS Softair ball bearing Piston Head with X-RING

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (XPGE).

    XPGE new version with X-RING and one piece plastic shim for AOE. The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 6 ventilation holes. This piston head is the most traditional of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :
    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :
    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    10,75 €
    FPS Softair ball bearing Piston Head with X-RING

    10,75 €

  • FPS Softair double o-ring ball bearing Piston Head X-RING

    FPS CNC ERGAL Double O-Ring Ball Bearing AEG Piston Head (XPPE).

    New version whith X-RING and one piece plastic shim for AOE. The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. Each FPS piston head is made of ergal and it is also anodized for smooth surface finish. This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double o-ring and ball-bearing. The piston head is constructed out of CNC ERGAL for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas. 

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    10,75 €
    FPS Softair double o-ring ball bearing Piston Head X-RING

    10,75 €

  • FPS Softair POM double o-ring ball bearing AEG Piston Head

    FPS CNC POM Double O-Ring Ball Bearing AEG Piston Head (TPPD).

    The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This is the most advanced version with 6 ventilation holes. This piston head is the ligthest of our piston heads and improves the performance of your aeg, double o-ring and ball-bearing. This piston head is constructed out of CNC POM for durability and precision.

    This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Weight: 8,7 grams

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    10,75 €
    FPS Softair POM double o-ring ball bearing AEG Piston Head

    10,75 €

  • FPS Softair ball bearing POM Piston Head with X-RING

    FPS CNC POM Double O-Ring Ball Bearing AEG Piston Head (XPPD).

    XPPD new version with X-RING and one piece plastic shim for AOE. The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This is the most advanced version with 6 ventilation holes. This piston head is the ligthest of our piston heads and improves the performance of your aeg, double o-ring and ball-bearing. This piston head is constructed out of CNC POM for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    Compatibility :
    Version 2, Version 3, Version 6, Version 7 ( M4, M16, MP5, AK, G36, M14, P90, SIG,STEYR AUG etc ...).

    Compatible with the following brands :
    TOKYO MARUI, G&G, VFC, ICS, KWA, H&K, JING GONG, CYMA, SRC, UMAREX, CLASSIC ARMY, ECHO 1 etc...

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    11,58 €
    FPS Softair ball bearing POM Piston Head with X-RING

    11,58 €

  • FPS Softair CNC Ball Bearing Piston Head Pressure Deviation (TPAE)

    The FPS ERGAL piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    11,58 €
    FPS Softair CNC Ball Bearing Piston Head Pressure Deviation (TPAE)

    11,58 €

  • FPS Softair ball bearing POM Piston Head double oring and adjustable AOE

    CNC POM Double O-Ring Ball Bearing AEG Piston Head with adjustable AOE (TPPA)

    The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This piston head allows to adjust the length of the piston of 1-2-3 or 4 mm, and it can also be used without shims. Find a perfect AOE improves the reliability of your gun. This piston head is one of the most ligthest of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC POM for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    12,42 €
    FPS Softair ball bearing POM Piston Head double oring and adjustable AOE

    12,42 €

  • FPS Softair ball bearing POM Piston Head for high speed ROF

    POM piston head designed for high rof and to increase the silence of the replica thanks to the very small knocking surface (TPNS). It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center with different angles) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. This piston head was developed thanks to the experience of Nico Saccocci of NikkSakk.Extreme.Airsoftcustom.


    The product is supplied with a metallic bearing and washer in orange-colored technopolymer. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass.
    Technical specifications:

    Weight: 8.3 grams (with metal pad)
    Weight: 5.5 grams (with technopolymer washer)

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    12,42 €
    FPS Softair ball bearing POM Piston Head for high speed ROF

    12,42 €

  • FPS Softair ball bearing POM Piston Head X-RING and adjustable AOE

    CNC POM Double O-Ring Ball Bearing AEG Piston Head with adjustable AOE (XPPA), new version with X-RING technology.

    The FPS POM piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB. The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape. This piston head allows to adjust the length of the piston of 1-2-3 or 4 mm, and it can also be used without shims. Find a perfect AOE improves the reliability of your gun. This piston head is one of the most ligthest of our production and improves the performance of your aeg, double o-ring and ball-bearing. The piston head is constructed out of CNC POM for durability and precision. This product is designed and manufactured entirely in Italy, by technicians who have years of experience in the repair and modification of airsoft replicas.

    100% MARUI COMPATIBLE
    100% MADE IN ITALY

    13,25 €
    FPS Softair ball bearing POM Piston Head X-RING and adjustable AOE

    13,25 €

  • GATE CNC HIGH SPEED Piston Head

    The piston head designed for the most demanding DSG and speed builds, helping achieve the best results and overcome limits. Thanks to the use of 10 vents, airflow significantly increases improving sealing. The ultra-lightweight POM material together with CNC machining ensures repeatability of shots, perfect head-to-cylinder seal, high RPS ratio, and eliminates FPS drops. The adjustable AOE makes it essential for every speed build. 

    Features:

    • Designed especially for most demanding DSG and speed builds
    • 10 vents enhancing airflow and sealing
    • Ultra-lightweight POM material
    • CNC machining
    • Perfect head-to-cylinder seal
    • AOE spacer included
    • No AEG modification required
    • Dedicated especially to pros and skilled users
    • Piston head weight 2.7 g (without bearing)

    Compatibility:

    • Ideal for max M140 spring power
    • All standard AEG cylinders
    • All standard AEG cylinder heads
    • All standard AEG pistons
    • O-rings 19x2.4 mm

    Kit contents:

    • HIGH SPEED Piston Head – POM
    • AOE spacer
    • 1 bearing
    • 2 installation screws
    • 2 o-rings
    • QR Code containing quickstart guide
    14,08 €
    GATE CNC HIGH SPEED Piston Head

    14,08 €

  • Maxx Model CNC Aluminum Double O-Ring Ball Bearing AEG Piston Head

    14,99 €
    Maxx Model CNC Aluminum Double O-Ring Ball Bearing AEG Piston Head

    14,99 €

  • FPS Softair technopolymer / Carbon fiber piston head Xring

    Xring Carbon fiber reinforced technopolymer piston head designed for high rof and to increase the silence of the aeg (XPAVPCF) It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass. Supplied with VITON Xring for maximum smoothness and chemical resistance to lubricants.

    10,67 €
    FPS Softair technopolymer / Carbon fiber piston head Xring

    10,67 €

  • FPS Softair POM / Carbon fiber piston head

    Carbon fiber reinforced pom piston head designed for high rof and to increase the silence of the aeg (TPAVPCF) It is the lightest among those produced by the FPS for rifles with gusts over 30 BBs / second. Its adoption lightens the weight of the piston and piston head with a significant reduction in mechanical stress and noise. The particular conformation of the striking part (conical degrading towards the center) ensures that the ventilation holes are never closed by the rubber of the cylinder head, without however leaving too much air between the cylinder head and piston head. All this ensures a perfect anti-vacuum system without ever producing power losses. For preparations of replicas with extreme rates our technical team recommends the use of the washer to lighten the beating mass. Supplied with VITON oring for maximum smoothness and chemical resistance to lubricants

    100% COMPATIBLE MARUI
    100% MADE IN ITALY

    9,83 €
    FPS Softair POM / Carbon fiber piston head

    9,83 €
Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Perun for KRYTAC KRISS VECTOR

    Perun for Krytac Kriss Vector replaces stock electronics in Kriss Vector airsoft replicas made by Krytac company. It provides lots of additional features, including active braking and full cycle control (making sure that each cycle is finished, even if the trigger is pulled very briefly).

    Freely programmable firing modes – Set any firing mode you like on any of the selector positions independently. Available modes are: safe, semi, binary, 2 to 5 round burst and auto.
    Active brake - active brake stops the motor after each shot preventing spring compression or in case of replicas with high rate of fire, overspin (double shot problem).
    Precocking - Fast trigger response can be a matter of victory or defeat, especially in CQB situations. With precocking enabled, piston will remain in rear position after each shot with the spring already compressed, ensuring that next shot will be fired immediately after you pull the trigger. To release the spring after using precocking, pull and hold the trigger. A second shot will be fired after 3 seconds, with no precocking and fully braked.
    Rate of fire reduction - Reduce the rate of fire in automatic or burst fire to save ammo or make the replica shoot in a more realistic fashion.
    Low battery voltage alarm - Dedicated for Li-Po and Li-Ion batteries. Should the battery voltage fall to a dangerously low level, user will be notified by short sound signals that are repeated every minute. This may also be freely switched on and off.
    Diagnostic system - Constantly monitors the replica and the mosfet itself. In case of any problems, immediately lets you know what it might be, making troubleshooting much easier.
    Electronic fuse - Will save your replica and battery in case of a major malfunction. It will automatically disconnect the battery if a short circuit or blocked motor is detected.

    Programming of all the settings is done solely by using trigger and selector, in an easily memorable and quick sequences. Programming is supported by sound signals and multicolor LED diode. That allows changing the settings in any moment, in a matter of seconds, even under enemy fire. Perun for Krytac Kriss Vector works without problems with any battery from 7V do 17V. It can also be used with most extreme setups, without any limitations as to the spring rating.

    79,08 €
    Perun for KRYTAC KRISS VECTOR

    79,08 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Airtech Studios Speed Flat Trigger for Krytac KRISS Vector - black

    The SFTB Speed Flat Trigger Blade is designed especially for the Krytac Kriss Vector that will give players the ability to tune up the sensitivity of the trigger response to suit their play style. Using the SFTB, players can adjust the sensitivity and tension using the screws and spring included.

    ✔️ Snappy Hairline Trigger Response

    ✔️ Fast React When It Matters The Most!

    ✔️ Fully Adjustable for Extreme Short Stroking and Trigger Pressure.

    ✔️ Aggressive New Look!

    ✔️ Made from Precision CNC Cut Stainless Steel

    ✔️ Safety Mode Will Remain Functional for Gamesite Regulations

    23,25 €
    Airtech Studios Speed Flat Trigger for Krytac KRISS Vector - black

    23,25 €

  • Airtech Studios Speed Flat Trigger for Krytac KRISS Vector - red

    The SFTB Speed Flat Trigger Blade is designed especially for the Krytac Kriss Vector that will give players the ability to tune up the sensitivity of the trigger response to suit their play style. Using the SFTB, players can adjust the sensitivity and tension using the screws and spring included.

    ✔️ Snappy Hairline Trigger Response

    ✔️ Fast React When It Matters The Most!

    ✔️ Fully Adjustable for Extreme Short Stroking and Trigger Pressure.

    ✔️ Aggressive New Look!

    ✔️ Made from Precision CNC Cut Stainless Steel

    ✔️ Safety Mode Will Remain Functional for Gamesite Regulations

    23,25 €
    Airtech Studios Speed Flat Trigger for Krytac KRISS Vector - red

    23,25 €

  • Prometheus adjustable CNC Trigger for Krytac KRISS Vector - black

    33,25 €
    Prometheus adjustable CNC Trigger for Krytac KRISS Vector - black

    33,25 €

  • Prometheus djustable CNC Trigger for Krytac KRISS Vector - Gold

    37,42 €
    Prometheus djustable CNC Trigger for Krytac KRISS Vector - Gold

    37,42 €

  • Prometheus djustable CNC Trigger for Krytac KRISS Vector - Red

    33,25 €
    Prometheus djustable CNC Trigger for Krytac KRISS Vector - Red

    33,25 €

  • Prometheus djustable CNC Trigger for Krytac KRISS Vector - Silver

    33,25 €
    Prometheus djustable CNC Trigger for Krytac KRISS Vector - Silver

    33,25 €
Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • ACETECH THOR Bifrost M tracer silencer for Krytac Kriss Vector

    166,58 €
    ACETECH THOR Bifrost M tracer silencer for Krytac Kriss Vector

    166,58 €

  • ACETECH THOR Brighter C tracer silencer for Krytac Kriss Vector

    116,58 €
    ACETECH THOR Brighter C tracer silencer for Krytac Kriss Vector

    116,58 €

This part will be assembled and tested

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • 4UANTUM Rubber AEG hop-up Friction Pro-High Performance

    Designed to achieve ultimate consistency, the Friction Pro hop-up bucking focuses on creating a perfectly centered axis of spin in every shot. While based on a rather traditional single-point design, the unique contour of the contact patch generates enough friction to even lift heavy BBs up to 0.48 grams, while minimizing contact surface to ensure there’s no room for error. Resulting in a flat, consistent, and accurate trajectory! 

    10,75 €
    4UANTUM Rubber AEG hop-up Friction Pro-High Performance

    10,75 €

  • Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    7,42 €

  • Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    7,42 €

  • Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    7,42 €

  • Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    7,42 €

  • Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 50 Degree (green)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    8,25 €

  • Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 60 Degree (yellow)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    8,25 €

  • Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 70 Degree (blue)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    8,25 €

  • Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 75 Degree (pink)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    8,25 €

  • Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    If your hop-up adjustment is not having a big effect on the hop-up of your BBs, then it probably means that your hop-up packing is worn down and is not gripping the BB properly before it is fired out. A new hop-up packing will allow more accurate hop-up adjustments. Tested and approved by RedWolf. Best used on guns that shoot below 400fps.

    10,75 €
    Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    10,75 €

  • Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.25 BBs or more

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    12,42 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    12,42 €

  • Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.2 BBs

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    11,58 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    11,58 €

  • Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    Maple Leaf Super Macaron is aspecial developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)

    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    8,25 €

  • Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    8,25 €

  • Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    8,25 €

  • Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    8,25 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Nimrod NT Blackbird 36K/27K CNC Brushless Motor short

    The Nimrod Tactical Brushless motor has 2 adjustable speed settings. Depending on the battery being used, either 27000 rpm or 36000 rpm can be set. Same as with the regular Nimrod motors, a D-shape pinion gear is used. Thus the power transmission is better and the change of the bevel gear is easier. The motor should only be used in conjunction with strong batteries. The C rating must necessarily be above 40 / 60. Also, the battery should have a high capacity (1400 mAh or more) to operate smoothly. The motor has been successfully tested with a variety of mosfets available on the market and it can be reported that all tested combinations worked well together.

    Please note that some Mosfet manufacturers cannot guarantee that operation with a brushless motor is possible. In this regard, always refer to the Mosfet manufacturer’s specifications. To ensure a trouble-free installation, the pinion to bevel gear position must be considered. Some grips and motor covers need to be modified to allow a perfect fit of the motor.

    149,92 €
    Nimrod NT Blackbird 36K/27K CNC Brushless Motor short

    149,92 €

  • Option No.1 Motor Brushless Hi-torque short plug-in

    The OptionNo.1 brand unveilsa brand new Hi-torque axe short Brushless motor that will allow you to upgrade your AEG replica. The special features of the Brushless motor allow you to benefit from impressive performance while reducing electrical consumption and removing the constraints of a conventional carbon motor.

    This motor is suitable for all mosfets! * see table below

    option-no1-moteur-brushless-hi-torque-lo

    • Increased response time compared to a conventional engine
    • Power consumption down
    • Operation by magnetic field
    • No motor brushes
    • Heats much less than a conventional engine
    • More torque
    • No mechanical and electrical loss
    • High performance
    • Plug-in design simple to install
    • 7.4V 31000 rpm LiPo battery
    • LiPo 11.1v 46000 rpm battery
    • Low voltage protection
    • Overheating protection
    • 100 Protection temperature protection
    108,25 €
    Option No.1 Motor Brushless Hi-torque short plug-in

    108,25 €

  • SHS high torque motor short axis

    The SHS high-torque motor is an affordable, high quality AEG motor that has been enhanced for high torque output. Well known from every gunsmith for several years, it is an essential base for upgrading your replica, especially since its price / performance ratio is unbeatable.

    Features :

    • Steel pinion gear
    • Neodym magnets
    • 16 TPA
    • Excellent ROF and responsiveness
    • Short axis version
    29,08 €
    SHS high torque motor short axis

    29,08 €

  • Warhead BASE Brushless motor 27K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 27,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    120,75 €
    Warhead BASE Brushless motor 27K short axis

    120,75 €

  • Warhead BASE Brushless motor 35K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 35,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    124,92 €
    Warhead BASE Brushless motor 35K short axis

    124,92 €

  • Warhead Motor Brushless HIGH speed 36K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    • High quality 7075 aluminum housing
    • Totally customized design with maximum power and torque
    • High temperature resistant quality copper winding
    • High quality magnets
    • Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    • High precision CNC design
    • High quality "D" insert for motor gear
    • Compatibility: AEG using short axis motors

    Information: 25,000 rpm in 7.4 v Lipo - 36,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    155,75 €
    Warhead Motor Brushless HIGH speed 36K short axis

    155,75 €

  • Warhead BASE Brushless motor 45K short axis

    Brushless DC motors represent a huge technological leap forward. The efficiency of brushless motors is significantly higher than the efficiency and performance of brushless motors.

    Die-cast aluminum housing
    Totally customized design with maximum power and torque
    High temperature resistant copper winding by PLC
    SH quality magnets
    Internal ESC with over-current and low-voltage cut-off to protect motor and battery.
    High quality "D" insert for motor gear
    Compatibility: AEG using short axis motors
    Information: 45,000 rpm in 11.1 v Lipo

    Operating voltage: 7.2v - 11.4v (2S to 3S Lipo battery)

    69434.jpg?time=1638183335142

    124,92 €
    Warhead BASE Brushless motor 45K short axis

    124,92 €

We install the skin of your choice on your custome replica, please note that an additional 40€ charge exclude VAT is integrated on the skin price.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - Hexatal white

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    81,58 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - Hexatal white

    81,58 €

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - Perkins

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    89,92 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - Perkins

    89,92 €

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - Black dundee 3D

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    62,42 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - Black dundee 3D

    62,42 €

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - Marpat

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    59,92 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - Marpat

    59,92 €

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - M05

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    59,92 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - M05

    59,92 €

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - BM

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    59,92 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - BM

    59,92 €

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - M

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    59,92 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - M

    59,92 €

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - MA

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    59,92 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - MA

    59,92 €

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - SU

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    59,92 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - SU

    59,92 €

  • ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - U

    Calendered polymer type adhesive covered with a lamination protecting against UV and scratches. Initially used for vehicle marking, AirsoftSkinZone adhesives offer great durability and are weather resistant.

    Skin installation :

    • Clean your replica with an alcoholic product (methylated spirits, gasoline F, at worst a window cleaner will do the trick).
    • The replica must be dry and degreased, with clean hands.
    • Take care to place yourself in a clean indoor workspace at a temperature ideally between 15 and 25 degrees.
    • Take your time !
    • Did you glue a piece a little crooked? , Don't panic, it is possible to gently reposition the adhesive as long as it has not been heated.
    • Once all the parts are installed, heat the adhesive using a hair dryer to match the hollow and rounded shapes.
    • Once cooled, the adhesive reaches its maximum adhesion.

    ​

    59,92 €
    ASZ Complete adhesive kit for Krytac Kriss Vector AEG + one extra mag - U

    59,92 €

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

This Krytac Kriss Vector has been upgraded in our workhop. Here is the list of the internal parts we have installed :

Gearbox :

  • Perun MOSFET for Kriss Vector
  • P6 Stainless steel shim set
  • Upgraded Full metal 14 teeth piston
  • Upgraded piston head with bearing
  • Upgraded CNC aluminium nozzle
  • P6 Workshop custom internal parts for AOE
  • Optional : CNC trigger, highly recommended !
Workshop preparation :
  • Unmount of the original airsoft gun
  • Open the gearbox, take off everything inside, cleaning & degreasing shells
  • Replacement of internal components
  • Adjusting the gears with inox shims, one by one
  • Angle of engagement optimisation (AOE)
  • Short Stroke of the sector gear and piston
  • Greasing with pencil
  • Adjusting the ROF to 18rds / sec exactly like the real one.
  • Firing tests
Important note :
  • 12 month warranty by P6 Workshop
  • Comes with Krytac 95 rds magazine
  • We recommend 11.1v lipo battery adviced in "accessories" section
  • Don`t feed your mid cap magazine more than 80% of the maximal capacity
  • We strongly advice you to use high performance BBs such as BLS, Krytac, Madbull ASG blaster Devil or open Blaster.
  • Never use grease or any silicone on the electric gun, magazine or BBs
  • Any opening by a third party other than Powair6 voids the warranty on the replica.

Data sheet

TypeKriss Vector
Caliber6mm Airsoft
ManufacturerKRYTAC
MaterialPolymer / Metal
Thread type14mm CCW
Hop-upAdjustable
Firing modeSelectable
Blowbackno
Attachment SystemPicatinny rail
Power sourceElectric
GearboxSpecial Vector 8mm
Gearbox inserts8mm Bearings
Gear ratio18:1 Torque
Quick change spring GearboxYes
Integrated MosfetPERUN KRISS VECTOR
Trigger SystemElectronic
Motor versionShort axis
Magazine VersionMid-cap Spring operated
Magazine capacity95
BatteryNot Included
Battery chargerNot Included
Battery ConnectorDEAN (T-Plug)
Power (FPS @ 0.20gr)Selectable

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Accessories

Mosfet

Here is a sum-up list of the available mosfets for our custom AEG airsoft guns. Note that you may see or not see this options following the Custom replica.

Important note : With a high performance mosfet configuration, for each shot fired the motor is instantly launched and instantly stopped, wich mean the more you shoot fast with a lot of quantity shot in few timing, the motor is heating accordingly, this is normal, but too much is not advised. Our products are made to get a very responsive semi automatic and make short full auto. If you wish to fire a lot of BBs in during a short timing (speedQB, Machine gun), we strongly advice to get HPA system more suitable.

The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade Economic version with limited number of functions.

 VIDEO

TITAN V2 Advanced Set is an AEG Control System for V2 gearboxes which will transform your airsoft gun into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. TITAN V2 enables you to adjust the trigger sensitivity with military precision. The innovative proximity trigger sensor offers you even 250 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions.

 VIDEO

Leviathan - V2 is processor controlled mosfet with Bluetooth communication. It adds new shooting modes, controls RoF, pre-cocking, active braking, low battery indication, statistics... Everything is controlled via application in the smart phone (iOS and Android). Device is fully integrated inside the gearbox version 2 instead of the original trigger contacts. Comes with completely made wires to stock with 30A mini fuse and deanT connector - no soldering needed.

VIDEO 

This option feature a modified Gate TITAN module combined with ICFU System (Integrated Custom Firestop Upgrade) : the system makes stop firing the replica when there is no BB left in the magazine, just like a PTW !

  • Stop BBs when magazine is empty
  • Gate Titan integrated mosfet
  • No bolt stop system necessary to resume fire
  • ICFU requires special magazine, not possible to use regular M4 AEG Magazine
  • Please never update the Firware, that would delete the ICFU fonction permently

 VIDEO ICFU Magazine

This option feature a modified Jefftron Leviathan module combined with ICFU System (Integrated Custom Firestop Upgrade) : the system makes stop firing the replica when there is no BB left in the magazine, just like a PTW !

  • Stop BBs when magazine is empty
  • Jefftron Leviathan integrated mosfet
  • No bolt stop system necessary to resume fire
  • ICFU requires special magazine, not possible to use regular M4 AEG Magazine
  • Please never update the Firware, that would delete the ICFU fonction permently

 VIDEO  ICFU Magazine

Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

P6 Customs

P6 Customs

See all products from P6 Customs

Questions 

Pas de question client pour le moment.

Seuls les utilisateurs enregistrés peuvent poser une question. Login

Avis (2)

Seuls les clients enregistrés peuvent poster un avis. Connectez-vous ou créez un compte .
Tri:
5/5
Vector de qualité chirurgicale !
Réplique full upgrade, livraison très bien effectué (par bateau vers les DOM), répond à mes attentes de performance. Encore merci à l’équipe de Powair6 pour cette réplique de haut de gamme ! (Il manque encore quelques accessoires externes pour la réplique qui arrivent bientôt !
Ce client a partagé une image.
Cet avis a été posté pour P6 Workshop Kriss Vector series custom AEG
5/5
Préparation kriss vector 11/2022
Préparation full upgrade d’un kriss vector. Bon suivi et conseil de l’équipe POWER6. Au vu de l’investissement l’équipe m’a convaincu d’un Sav sérieux le cas échéant. Réplique reçu ce jour un bijoux. Collisage parfait, matériel d’origine remis, 3000billes cadeaux ça fait toujours plaisir. Quelques essais de tir fait, que dire le top ça file droit sur 50 m facile. Bref si vous voulez casser votre tirelire ici n’hésiter pas
Ce client a partagé une image.
Cet avis a été posté pour P6 Workshop Kriss Vector series custom AEG
Voir plus d'avis