> >>KJ Works KC-02 MK2 GBBR
KJ Works KC-02 MK2 GBBR - View larger
Previous Next

KJ Works KC-02 MK2 GBBR

KC-02-V2

New product

Version 2 !

More details

Out of stock - No date of restock

Moyenne des votes pour ce produit
5.0 / 5
Moyenne : 5.0 / 5
Basée sur 1 avis clients.

233,25 € tax excl.

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

More info

This KJ model is at its heart a replica of the real steel Ruger 10/22. 

The KJ is clearly a tactical version of the carbine coming in at a modest 2.7 Kg / 5.9 lbs with a length of 78cm/31 Inches to 86cm/34 Inches with its telescopically adjustable M4 style stock. The rifle used an M4 stock tube like structure to attach stocks allowing it to take any M4 compatible stocks and also uses a gas M4 type pistol grip allowing just as much aftermarket options there as well. The weapon in chiefly a sturdy metal assembly riding in a polymer body, a measure which affords the weapons incredibly sturdy structure yet low weight.

With a 30 round magazine, the weapon clocks in at a spicy 400 fps and is capable of taking red gas which pushes it up to around 450 fps. The-out-of-the-box accuracy of this weapon is astounding, capable of landing 50mm / 2 inch groupings out to 20m / 65 feet using 0.4g BBs. As a semi-automatic gas weapon, it also allows you to tap off those high accuracy shots with a very decent cycle rate.

The hop-up adjust dial is on the outside of the weapon, right on top just on the rail just in front of the rear iron sight. This means you can adjust the hop-up while aiming and firing, a superb location. The weapon also has sling swivels on the stock and front end allowing for a convenient slinging option.

The weapon of course has accessory rails, fairly standard fair on contemporary tactical weapons though not seen quite so thorough on semi-auto rifles like this. A 31.5cm / 12.5 Inch rail lines the top with three more 15cm / 6 Inch rails one each side and the bottom. Options like this allow the use of the whole host of rail-attach accessories available in airsoft. The weapon comes with fixed rail attach iron sights, not quite M16 style but obviously very similar with the M16 style post and two-position ring. The rear iron sight is adjustable exactly like an M16 sight.

The weapons safety is built into the trigger guard as a side-to-side push button right in front of the trigger. The magazine release catch is a large tab between the magazine and trigger guard. This setup makes the rifles handling fairly ambidextrous but still favoring the right handed crowd a little as the charging handle cycling on the right sight might be a problem (though doubtful). The weapon also comes with three rail covers on the sides and bottom to make the fore end more comfortable when accessories are not in use.

Data sheet

Caliber6mm Airsoft
Length860mm
Weight3400gr
MaterialPolymer / Metal
Main colorBlack
Hop-upAdjustable
Firing modeSemi automatic
Power sourceGas
Inner barrel (mm)380
Inner Barrel dia (mm)6.05
Magazine capacity30
Power (FPS @ 0.20gr)430

Accessories

Gas replica power

The power of gas replicas is a point of reference only, it does not constitute a guarantee of results but an estimation made by the manufacturer. Please take this information into account before purchasing, no warranty service regarding the power can be applied. The power advertised for gas replicas can be highly variable because the cooling of the tank linked to rapid fire, pressure / type of gas used and winter conditions, it is possible to empty all the gas quickly from a magazine, and if there is not enough time given to convert the liquid part into gas, the liquid form then rises through the nozzle as a white cloud. Be sure to use your equipment on suitable climatic conditions and adapt your rate of fire to the ambient temperature to avoid that effect. We recommend that you always choose the manufacturer's brand spare magazines. Choosing a different brand may generate a different power from the original as the percussion valve and magazine lips are not the same.

Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

KJ WORKS

KJ WORKS

See all products from KJ WORKS

Questions  (2)

A partir de Florian F | 2019-11-10 13:57:11

Bonjour l’équipe powair6 je souhaiterais passer les chargeurs de mon kc-02 à gaz en chargeurs hpa qu’elle valve Je dois prendre et existe il des chargeur hpa pour cette réplique en vente Merci d’avance pour votre réponse Ps: j’ai commandé 2-3 fois chez vous ,jamais étais déçus , envoie rapide et bien emballer rien à dire

Powair6

Bonjour Florian, le système de percussion des chargeurs KC-O2 sont en haut, il faut donc percer en dessous si vous souhaitez les convertir en HPA, n'hésitez pas a nous contacter pour cela ! Cdt

A partir de JULIEN R. | 2019-04-30 11:29:48

bien le bonjour l'equipe powair6.

je possede cette replique depuis 2 ans deja et je voudrais y installer un canon et un joint hop-up .

que me conseilleriez vous ? comme marque de canon et comme marque et modele niveau joint hop-up.
pour la mesure du canon je compte aussi prendre un silencieux histoire de passer dans les 400 mm de longueur

MERCI d'avance pour vos conseils et votre professionnalisme .

julien

ps: mon hk vfc ral8000 version torque P6 de chez vous a fait un carton a BW . monte avec un m120 suite a l'appel telephonique que javais eu avec vous , la portee etait .... monstrueuse ;)

Powair6

Bonjour Julien, merci beaucoup pour votre retour ! Vous pouvez opter pour un canon de type GBB tel que celui ci : https://www.powair6.com/fr/canons-sniper/5870-maple-leaf-canon-interne-crazy-jet-pour-vsr-428mm.html, pour le joint un maple leaf GBB sera également parfait. Après c'est juste un conseil car il existe aussi plein de bonne solutions de montage avec d'autre marques ! Cordialement

Page: 1
Seuls les utilisateurs enregistrés peuvent poser une question. Login

Avis (1)

Seuls les clients enregistrés peuvent poster un avis. Connectez-vous ou créez un compte .
Tri:
5/5
Impécable
Expédition au top ,2 jours ouvrés entre la commande et la réception .Tous les articles commandés en stock .Me suis fait un Snipe sur base d'un KC02 KJ Works ,et j'ai tout pris ici ,sauf le bipied qui était malheureusement en rupture . Bref ,un super site pour l'Airsoft et le custom .
Cet avis a été posté pour KJ Works KC-02 MK2 GBBR
Voir plus d'avis