ZZZ Airsoft Infinite V4 - HPA Conversion kit for Glock / AAP-01

Discover Infinite, the first HPA conversion kit dedicated to GBBs, the most compact and realistic platform in airsoft. Thanks to its innovative ‘Split’ design, it eliminates all the constraints of traditional GBB magazines without ever sacrificing the feel.

Entirely mechanical, with no FCU or LiPo battery, Infinite guarantees stable and immediate power. It offers you the best of three worlds: the authentic feel and ultra-compact size of a GBB, the consistency and reliability of an HPA system, and the practicality of an AEG, for total immersion and ten times the fun.

Key features:

• GBB Glock compatibility: AAP-01, VFC G17 Gen5, G45, G19X, P80... and many more.
• 100% realistic feel: recoil, empty magazine detection and authentic handling.
• Fully mechanical HPA system: no batteries or electronics required.
• Ultra-modular: switch from mil-sim to speedsoft thanks to the many options available.
• Quick and easy installation: ready to play in minutes.

Included:

• x1 Infinite V4 HPA conversion kit
• x1 installation set

The HPA coupler and magazines are not included with the Infinite conversion kit.

It is advisable to arm your replica before inserting the magazine and connecting it to the HPA hose, as the replica fires a first shot once connected to the air supply.

For the AAP-01 and Glock replicas (excluding G17 TM Gen4 and Gen5), a slight modification will need to be made to allow the HPA hose to pass through the lower frame. This adjustment is simple to perform and poses no risk to the replica.

Attention!

Shim recommendations:

To achieve a perfect seal with your replica, you can easily adjust the kit using the shims already installed on it. This system has been designed to be as simple as possible: thanks to the height adjustment, you don't have to worry about small differences in tolerances between parts. The kit can therefore be adapted to many Glock-type replicas, including customised models.

And to make things easier for you, you can simply use the shim configurations shown in the table below. The configurations shown are for reference only: you can of course modify them according to the tolerances or specific features of your replica.

(The shims must be adjusted on both sides, using the 0.5 mm and 1 mm shims provided.)