P6 Workshop Daniel Defense® SA-C19 Core custom HPA

P6-HPA-SA-C19CORE

New product

Preparation time : 2-5 days

Moyenne des votes pour ce produit
0 / 5
Moyenne : 0 / 5
Basée sur 0 avis clients.

Configure

Si vous souhaitez enregistrer votre configuration, vous devez d'abord vous connecter.

Connexion

Customize your product

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Specna arms SA-C19 Core Mk18 Daniel defense - Black

    SA-C19 CORE MK18 - Daniel Defense Carbine. Specna Arms has teamed up with the famous weapons manufacturerDaniel Defense to develop this exceptional product. Replica of the famous American weapon this replica will delight both beginners and experienced players.

    Characteristics :

    • Daniel Defense licensed
    • ESA (TM) Quick Spring Change System
    • Manufacturer: Specna Arms
    • Gearbox version: Gearbox v2
    • Fire mode: Single, auto
    • Diameter of bearings: 8mm
    • Length: 720-780mm
    • Internal barrel length: 290mm
    • Weight: 2460g
    • Magazine: Hi-Cap 300 shots
    • Hop-Up: Yes, adjustable
    • Blow Back: no
    • Materials: plastic and metal
    • Barrel thread: 14mm CCW
    • Quick Spring Change System
    • Precision barrel: 6.03

    Package:

    • Replica
    • Charger
    • Additional low power spring

    This replica is also available with HPA or AEG upgrade : custom AEG   CUSTOM HPA

    Specna arms SA-C19 Core Mk18 Daniel defense - Black

  • Specna arms SA-C19 Core Mk18 Daniel Defense - Chaos Bronze

    SA-C19 CORE MK18 - Daniel Defense Carbine. Specna Arms has teamed up with the famous weapons manufacturerDaniel Defense to develop this exceptional product. Replica of the famous American weapon this replica will delight both beginners and experienced players.

    Characteristics

    • Daniel Defense licensed
    • ESA (TM) Quick Spring Change System
    • Manufacturer: Specna Arms
    • Gearbox version: Gearbox v2
    • Fire mode: Single, auto
    • Diameter of bearings: 8mm
    • Length: 720-780mm
    • Internal barrel length: 290mm
    • Weight: 2460g
    • Magazine: Hi-Cap 300 shots
    • Hop-Up: Yes, adjustable
    • Blow Back: no
    • Materials: plastic and metal
    • Barrel thread: 14mm CCW
    • Quick Spring Change System
    • Precision barrel: 6.03

    Package:

    • Replica
    • Charger
    • Additional low power spring

    This replica is also available with HPA or AEG upgrade : custom AEG   CUSTOM HPA

    Specna arms SA-C19 Core Mk18 Daniel Defense - Chaos Bronze

Choose your HPA System.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Polarstar Kythera V2 M4

    The Kythera has been the most eagerly anticipated products from PolarStar in the past decade. This HPA system is a radical departure from all previous systems that PolarStar has produced since the Kythera does not use a battery, an FCU or any type of electronics. The Kythera is completely mechanical. This means you never have to worry about charging batteries or work with delicate electronics. It also means that the system is completely waterproof.

    The name "Kythera" (ky-the-ra) was derived from the Antikythera Mechanism which is a mysterious device that was discovered by sponge divers off the coast of the Greek island Antikyther. The mechanism was so advanced in design that scientists have been studying it for decades to discover its purpose. The machine dates from around the end of the 2nd century B.C. and is the most sophisticated mechanism known from the ancient world. Nothing as complex is known for the next thousand years. The Antikythera Mechanism is now understood to be dedicated to astronomical phenomena and operates as a complex mechanical "computer" which tracks the cycles of the Solar System.

    For this reason we used the name Kythera for the valve mechanism at the core of a new line of PolarStar mechanical HPA systems. Although it contains very few parts and is easy to install and maintain, the system incorporates a very intelligent design and is unlike anything else on the market. The system was designed as a mechanical system from the ground up and uses a realistic trigger mechanism which can be applied to single-shot, semi-automatic and fully-automatic systems. The first of these systems is Kythera SA (Semi-Automatic), the semi-auto-only variant for use in AEG gearboxes.

    So, what makes the Kythera so unique?

    Realistic Trigger

    What sets this system apart from other mechanical systems is the design of its trigger. The trigger mechanism is designed to replicate the function, weight and feel of a real single-action firearm trigger. It feels real because it is real. The hardened alloy steel sears catch and release the stainless steel spool valve in the same way the sears of a real firearm catch and release the hammer or striker. This gives the Kythera trigger the distinct break and reset you would expect to feel when firing a real single action firearm. The trigger mechanism in the Kythera SA is also adjustable, allowing the user to fine tune the weight and over travel. Additionally, the internal firing valve is balanced and the only force applied during firing is the main spring. This means the function and feel of the trigger is independent of input pressure and velocity.

    Complete Shot Cycle

    The design of the Kythera SA completes a shot cycle on the trigger pull. This gives you the proven closed bolt performance of the Fusion Engine and F2 in a completely mechanical, waterproof system with a realistic trigger. It does not require the trigger to be released before the nozzle chambers the next round and the firing volume is refilled. This occurs automatically and consistently every shot, with adjustable nozzle dwell and return speed. As the system resets and recharges immediately after firing, it is ready to fire again before the trigger has been released. This means the system can cycle very quickly for faster follow up shots and a lower potential for double feeding.

    Extremely Efficient and Consistent

    The valve design of the Kythera operates without the need for air to control the opening or closing of the valve. Without a pilot valve, 100% of the air going into the system is fired through the nozzle allowing it to operate very efficiently. In addition to being extremely efficient, the system is also extremely consistent. The valve is released at the same point every shot with the same force applied, regardless of trigger input.

    Universal Charging Cord

    The steel cord visible at the back of the system is attached to a cocking mechanism for the internal spool valve.  Although the system automatically cocks the spool valve when the system is pressurized, since the Kythera uses a balanced valve, it is possible in certain situations that the valve could stall and needs to be manually cocked. This typically only happens if the system is run completely out of air so that the pressure drops below the operating range of the system. The cord is designed to be either routed through the grip of the rifle for easy access or even possibly attached in some fashion to the charging handle.

    Easy Installation

    The Kythera SA system installs into a standard gearbox as a single assembly and typically does not require any modification to the gearbox. There are no separate parts to install and the only parts needing to be retained from the gearbox is the trigger, spring guide, selector and safety components.

    Wide Velocity Adjustment Range

    The Kythera has a wide operating pressure range of 60psi to 180psi which allows you to fine tune the velocity of the system and tailor for different requirements and applications. Within this pressure range we observed a muzzle velocity of 270 - 500fps w/ .20g using a 6.05x380mm barrel. This lets a single Kythera be used in any role ranging from CQB to Sniper by mainly just adjusting the input pressure from your air rig.

    • Designed from the ground up as a high performance mechanical HPA system, not a modification of a solenoid operated design.
    • Patent pending valve mechanism provides excellent efficiency and consistent velocity combined with a realistic trigger pull and reset.
    • Completes a full shot cycle on the trigger pull alone which translates into consistent nozzle movement and rapid follow up shots.
    • Adjustable trigger. Adjustments include: Weight, length of pull and over travel.
    • Adjustable nozzle dwell/return speed.
    • Wide operating pressure range of 60 to 180psi.

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    Polarstar Kythera V2 M4

  • Wolverine Inferno GEN2 Spartan M4

    The GEN 2 Inferno is the culmination of a great deal of work to take the next step forward in the development of HPA technology. Over the past couple years since we launched the SMP, multiple other companies saw the value of this type of technology and have attempted to replicate its performance. The Gen2 once again leaves everyone far behind.

    The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. Particularly, it is designed to solve the "open bolt problem". It is a hybrid design which keeps the advantages of an open bolt system: easy tuning, no first round dry fire, efficiency, and adds the simplicity of easier hop up tuning that closed bolt systems have traditionally offered. In addition, it further improves the efficiency over our previous systems by an estimated 10-15%. Here are a few highlights!
    Features:

    • Patent Pending independent poppet and nozzle design
    • Spartan`s Edition integrate FCU onto the trigger board
    • Hybrid design allows pause between bb loading and bb firing
    • Improves hop up performance with a wide range of stock and aftermarket options
    • Still uses Wolverine Airsoft`s Patent Pending Imbalanced Poppet
    • Backwards compatible with all Wolverine Airsoft electronics.
    • Still uses bullet proof direct solenoid fired design
    • NO ADDITIONAL CRITICAL ORINGS--> No negative impact on reliability!
    • Estimated 10-15% efficiency improvement

      For details about installation, please visit https://wolverineairsoft.com/installationtips/.

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    Wolverine Inferno GEN2 Spartan M4

  • Wolverine Inferno GEN2 Premium M4

    The GEN 2 Inferno is the culmination of a great deal of work to take the next step forward in the development of HPA technology. Over the past couple years since we launched the SMP, multiple other companies saw the value of this type of technology and have attempted to replicate its performance. The Gen2 once again leaves everyone far behind.

    The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. Particularly, it is designed to solve the "open bolt problem". It is a hybrid design which keeps the advantages of an open bolt system: easy tuning, no first round dry fire, efficiency, and adds the simplicity of easier hop up tuning that closed bolt systems have traditionally offered. In addition, it further improves the efficiency over our previous systems by an estimated 10-15%. Here are a few highlights!

    Features:

    • Patent Pending independent poppet and nozzle design
    • Hybrid design allows pause between bb loading and bb firing
    • Improves hop up performance with a wide range of stock and aftermarket options
    • Still uses Wolverine Airsoft`s Patent Pending Imbalanced Poppet
    • Backwards compatible with all Wolverine Airsoft electronics.
    • Still uses bullet proof direct solenoid fired design
    • NO ADDITIONAL CRITICAL ORINGS--> No negative impact on reliability!
    • Estimated 10-15% efficiency improvement

    This model is only suitable for M4 AEG

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    Wolverine Inferno GEN2 Premium M4

  • Wolverine Inferno GEN2 Premium M4 Heretic Edition AEG

    Behold the Wolverine Airsoft INFERNO Gen 2 Heretic Edition – the ultimate upgrade kit engineered for speedsoft enthusiasts! This kit optimizes the award-winning INFERNO Gen 2 hybrid technology with a new Blackleaf Airsoft speed trigger board and updated electronics to give you unrivaled speed, responsiveness, precision, and binary options. Transform your standard V2 AEG into a Heretical masterpiece of HPA performance and dominate the field with blazing-fast trigger responses and unbeatable consistency. Accelerate your gameplay to the next level with the INFERNO Gen 2 Heretic Edition and experience unparalleled control over your airsoft gun.

    INFERNO Gen 2

    •  Independent poppet and nozzle design allows pause between BB loading and BB firing for accurate, consistent velocity
    •  Outstanding hop-up performance with a wide range of stock and aftermarket options
    •  Industry-leading air efficiency
    •  Bullet-proof direct-solenoid-fired design
    •  Full CNC construction
    •  Integrated Filtered Line keeps dust and debris out of engine

    Gen 2 Premium FCU

    •  Intuitive LED menu with tool-less button style programming
    •  High speed trigger algorithm for up to 30 RPS on semi auto
    •  7 customizable fire states including new binary fire mode
    •  Precise adjustment of dwell, rate of fire and burst mode
    •  Short-detection, anti-stiction algorithm, and more

    Speed Trigger Board by Blackleaf Airsoft

    •  Tactile trigger switch for better trigger response
    •  Electronic safety switch (Allows safety function with ultra-short trigger pull)
    •  Durable reinforced trigger switch

    Specifications

    •  Input pressure: 60-140 PSI (Use with STORM Category 5 Regulator for best performance!)
    •  Output energy 0.5-3J adjustable (build dependent)
    •  ROF: 5-35 RPS full-auto, up to 30 RPS Semi
    •  Battery Input: JST 6-8V

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    Wolverine Inferno GEN2 Premium M4 Heretic Edition AEG

  • PolarStar F2 M4

    Product content :

    - Polarstar F2 V2 M4
    - FCU wire harness    
    - FCU REV3    
    - V2 Trigger board    
    - English Manual

    What is F2?

    F2 is essentially a Mini Fusion Engine. It offers the same adjustability and performance as the Fusion Engine in a cylinder sized package.

    Patented Dual Solenoid Design

    The dual solenoid design of the F2™ provides the same functionality as the legendary Fusion Engine™ but in a more compact, efficient and flexible design. Dual solenoids allow for the nozzle and the poppet valve to be adjusted independently of each other for unparalleled control over both the loading time and air volume used. Additionally, this makes it possible to change the firing sequence giving it the ability to operate in both true closed bolt as well as "AEG" mode.

    Increased Efficiency

    The F2™ incorporates a new one-piece, lightweight poppet valve design yet still operates on the same principle as the Fusion Engine™ poppet. This valve is able to operate at lower pressures and uses less air volume to function which optimizes air efficiency. The standard F2 poppet is equivilent to the Red Low-Flow poppet of the Fusion Engine.

    Spring Loaded Nozzle

    The F2™ nozzle is spring biased forward which provides a consistent loading force regardless of operating pressure. It shares the same spring as the Fusion Engine™ with both light and heavy spring options available to adjust the loading force. The robust design of the F2™ allows for an operating pressure range of 45psi to 145psi which enables it to achieve velocities from CQB to DMR while employing only one nozzle for the entire velocity adjustment range.

    What is the difference between F2, F1 and JACK ?

    Both F1 and JACK are "open bolt" systems, meaning the nozzle is in the rearward position when the system is idle and the round is fired during the forward movement of the nozzle. F2 is a dual-solenoid system which allows for complete control over the shot cycle

    Nozzles :

    Over 20 standard F2 nozzles are available for installation into a wide range of replicas. These are numbered, rather than named, since a single nozzle is often compatible with multiple replicas. The "Original Model" listed in the table is the replica from which the nozzle measurements were taken and is for reference. If your gun is not listed in our Compatiblity Database a recommended nozzle length may calculated by measuring your original gearbox and applying the following formula: TIP = F + B - (A/2) - .057. A more precise measurement (which accounts for the hopup and bucking in use) may be obtained by installing a nozzle into the system which is slightly too long for the replica and measuring the nozzle setback when placed into the hopup.

    Options available in the future :

        Offset and Centerline cylinders and nozzles.
        Wire harnesses are available in 7.5", 13" and 18" standard lengths
        Interchangable Bushing Inserts which prevent any movement of F2 within the gearbox.
        Custom nozzle lengths available.
        Low velocity poppets (< 1J) available.
        Light and Heavy nozzle springs available.

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    PolarStar F2 M4

  • Polarstar Fusion Engine v2 M4

    Have you ever dreamed of Polarizing your MP5, G3 or SCAR? With the introduction of the GEN3, now you can! At first glance the GEN3 FE looks very much like the GEN2 and, for the most part, the two are quite similar. However, unlike its predecessor, the FE GEN3 is no longer just for the M4/M16 series rifle. We applied the same concept used with our Version 3 Fusion Engine™ so that it is now able to interface with the selector plate and related components of your existing AEG’s gearbox.

    The FE GEN3 will come complete with a trigger and steel selector plate so that it can be installed into any airsoft gun which is Tokyo Marui compatible. However, by installing a different nozzle or rifle specific conversion kit, you will be able to expand the number of rifles it will be compatible with. In most cases all you’ll need to do is change out the trigger and selector components with ones from your AEG, install a different Fusion Engine™ nozzle, and the engine is ready to use in a completely different model of rifle.

    The internal operation of the Fusion Engine cylinder assembly are exactly the same and share many of the same parts, so it offers the same stellar downrange performance and rock solid reliability as its predecessor. This GEN3 does however feature a new side plate design to accommodate the AEG selector plate and is equipped with a new electronic switchboard. One advantage to this new design is that the switchboard offers a wider contact point with the selector plate to allow for varying tolerances in the rifles selector assembly making for improved out-of-the-box compatibility with an increased number of rifle brands.

    As requested by many of our fans, the FE GEN3 will come standard with our newly redesigned “Milsim Manifold”. This feature enables the user to install an optional 90 degree fitting inside of their engine allowing the air line to be routed to the rear of the engine and exit through the buffer tube sling plate on an M4 series rifle.

    As with all of our engine models, you can quickly change and adjust key functions of the engine via the on-board FCU (Fire Control Unit) which is no bigger than an AEG`s MOSFET and can easily fit inside of a rifles battery compartment along with a small Li-po battery. Using the FCU`s five position joystick and LCD display you will be able to easily adjust such functions as the systems cyclic rate, fire modes and nozzle timing on the fly.

    With the Fusion Engine™ in your rifle you will also be able to adjust its muzzle velocity via the remote air rig (sold separately). Adjusting the PSI output on your air rig will allow you to fine tune your rifles muzzle velocity so you will always be able to get it exactly where you want it. And then for larger velocity changes we offer a series of air nozzles with varying bore sizes to shift the velocity adjustment range up or down to best meet your requirements.

    The best part is that our system is extremely user friendly. Even if you have only the basic understanding of an airsoft rifle, you will find that operating and manipulating this system is very simple and does not require a degree in airsoft engineering to figure out.

     Specifications :
    Fire mode/s : Full Auto, Semi Auto, Variable Burst
    FE Profile: M4
    Included Selector Plate: M4/M16 Series
    Cyclic Rate: 500 RPM to 1,800 RPM
    Fire Modes: Semi / 2 to 9 Shot Burst, Semi / Full Auto, Semi Only
    Power Source: HPA (High Pressure Air via remote air rig)
    FCU Battery: 7.4v Lipo w/ JST Connector
    FCU Voltage Input Range: 6.8v to 12v
    Electronics: REV2
    PSI Operating Range: 80 psi. to 120 psi.
    Build Material: Aluminum

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    Polarstar Fusion Engine v2 M4

  • Polarstar Fusion Engine M4 Red Nozzle & Poppet

    Have you ever dreamed of Polarizing your MP5, G3 or SCAR? With the introduction of the GEN3, now you can! At first glance the GEN3 FE looks very much like the GEN2 and, for the most part, the two are quite similar. However, unlike its predecessor, the FE GEN3 is no longer just for the M4/M16 series rifle. We applied the same concept used with our Version 3 Fusion Engine™ so that it is now able to interface with the selector plate and related components of your existing AEG’s gearbox.

    The FE GEN3 will come complete with a trigger and steel selector plate so that it can be installed into any airsoft gun which is Tokyo Marui compatible. However, by installing a different nozzle or rifle specific conversion kit, you will be able to expand the number of rifles it will be compatible with. In most cases all you’ll need to do is change out the trigger and selector components with ones from your AEG, install a different Fusion Engine™ nozzle, and the engine is ready to use in a completely different model of rifle.

    The internal operation of the Fusion Engine cylinder assembly are exactly the same and share many of the same parts, so it offers the same stellar downrange performance and rock solid reliability as its predecessor. This GEN3 does however feature a new side plate design to accommodate the AEG selector plate and is equipped with a new electronic switchboard. One advantage to this new design is that the switchboard offers a wider contact point with the selector plate to allow for varying tolerances in the rifles selector assembly making for improved out-of-the-box compatibility with an increased number of rifle brands.

    As requested by many of our fans, the FE GEN3 will come standard with our newly redesigned “Milsim Manifold”. This feature enables the user to install an optional 90 degree fitting inside of their engine allowing the air line to be routed to the rear of the engine and exit through the buffer tube sling plate on an M4 series rifle.

    As with all of our engine models, you can quickly change and adjust key functions of the engine via the on-board FCU (Fire Control Unit) which is no bigger than an AEG`s MOSFET and can easily fit inside of a rifles battery compartment along with a small Li-po battery. Using the FCU`s five position joystick and LCD display you will be able to easily adjust such functions as the systems cyclic rate, fire modes and nozzle timing on the fly.

    With the Fusion Engine™ in your rifle you will also be able to adjust its muzzle velocity via the remote air rig (sold separately). Adjusting the PSI output on your air rig will allow you to fine tune your rifles muzzle velocity so you will always be able to get it exactly where you want it. And then for larger velocity changes we offer a series of air nozzles with varying bore sizes to shift the velocity adjustment range up or down to best meet your requirements.

    The best part is that our system is extremely user friendly. Even if you have only the basic understanding of an airsoft rifle, you will find that operating and manipulating this system is very simple and does not require a degree in airsoft engineering to figure out.

    Specifications :

    Comes with Polarstar Red nozzle and Red Poppet

    Fire mode/s : Full Auto, Semi Auto, Variable Burst
    FE Profile: M4
    Included Selector Plate: M4/M16 Series
    Cyclic Rate: 500 RPM to 1,800 RPM
    Fire Modes: Semi / 2 to 9 Shot Burst, Semi / Full Auto, Semi Only
    Power Source: HPA (High Pressure Air via remote air rig)
    FCU Battery: 7.4v Lipo w/ JST Connector
    FCU Voltage Input Range: 6.8v to 12v
    Electronics: REV2
    PSI Operating Range: 80 psi. to 120 psi.
    Build Material: Aluminum

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    Polarstar Fusion Engine M4 Red Nozzle & Poppet

  • P6 Fusion Engine V2 M4 Poppet mod

    Polarstar Fusion Engine modified by P6 Workshop poppet mod wich reduce power and optimize air consumption.

    The Polarstar Fusion Engine poppet is designed to work with all the powers offered by the wide range of nozzles, the original air flow is therefore very high and not optimized for low powers (large air release on poppet side and tiny nozzle diameter). Our preparation carried out in the workshop aims to modify the poppet by reducing the air flow released instantly by the valve and by enlarging the internal diameter of the original nozzle.The poppet air flow modification have only one single hole (unlike the red and yellow Polarstar sprinkler type poppets) and it is identical to the inner diameter of the modified nozzle, which optimizes air flow and air consumption for the requested power. Maximum power at 120 PSI is around 430FPS. FPS results may vary depending on the length and diameter of the barrel.

    P6 poppet & nozzle mod include :

    • Modified Polarstar fusion engine by P6 Workshop
    • Original Poppet lowered air flow by 75%
    • Original Nozzle milled with large aperture with our turning lathe
    • 120 PSI is around 430FPS MAX
    • Comes with REV3 FCU

    FPS may change with inner barrel lenght and inner diameter

    Please note that instaling a HPA drop in system is recommanded for skilled gunsmith only. The product comes as a spare part and does not come with installation manual. By purchasing an HPA system you take entire responsability of the assembly and upcoming results. For products delivered with a trigger board, contactors / switch are not guaranted by the manufacturer in case of break. We advice to take extreme care when installing the selector plate in order to not break the button. Regarding the trigger switch, it is recommended to block mecanicaly the trigger once the the trigger switch is activated to avoid excessive pressure on it.

    P6 Fusion Engine V2 M4 Poppet mod

The replica comes with the original macroline out of the motor grip, you can choose US or EU version. You have also the possibility to select our Easyconnect system, in this case a male connector will be fitted directly onto the motor grip, wich mean no more visible macroline hose, it will be much more easier to connect & deconnect your replica with just one hand, and the look is better ! You can also choose US or EU connector following the air system version you have.

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • Line out of the grip - EU

    0,00 €
    Line out of the grip - EU

    0,00 €
  • Line out of the grip - US

    0,00 €
    Line out of the grip - US

    0,00 €
  • Easyconnect on grip - EU

    16,58 €
    Easyconnect on grip - EU

    16,58 €
  • Easyconnect on grip - US

    16,58 €
    Easyconnect on grip - US

    16,58 €
  • Balystik braided line for HPA replica - Black EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and an additional finishing touch for your replica, ideal for supplying your replica with air in a high-performance and leak-free way during your airsoft games !

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Black EU

    14,08 €
  • Balystik braided line for HPA replica - Black US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Black US

    14,08 €
  • Balystik braided line for HPA replica - Tan EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Tan EU

    14,08 €
  • Balystik braided line for HPA replica - Tan US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Tan US

    14,08 €
  • Balystik braided line for HPA replica - Grey EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Grey EU

    14,08 €
  • Balystik braided line for HPA replica - Grey US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Grey US

    14,08 €
  • Balystik braided line for HPA replica - OD EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - OD EU

    14,08 €
  • Balystik braided line for HPA replica - OD US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - OD US

    14,08 €
  • Balystik braided line for HPA replica - Deep coffee EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Deep coffee EU

    14,08 €
  • Balystik braided line for HPA replica - Deep coffee US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Deep coffee US

    14,08 €
  • Balystik braided line for HPA replica - Red EU

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • EU Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Red EU

    14,08 €
  • Balystik braided line for HPA replica - Red US

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your pistol grip. Thanks to its integrated elbow, it allows direct alignment in the direction of the grip and avoid risk of bending. The braided finish offers much better resistance and additional touch of style for your HPA gun.

    • HPA system compatibility : most of drop-in system such as Wolverine Inferno & reaper , Polarstar F2, F1, jack.
    • Replica compatibility : most of replicas with V2 gearbox : M4, Scar, 416, MP5 ....
    • Not compatible with Fusion engine and MTW
    • US Connector version

    91967.jpg?time=1673513102207

    14,08 €
    Balystik braided line for HPA replica - Red US

    14,08 €

Vous ne pouvez pas ajouter plus de 1 quantité(s)

Vous devez ajouter un minimum de 1 quantité(s)

  • SAFE - SEMI - AUTO

    SAFE - SEMI - AUTO

  • SAFE - SEMI - BURST3

    SAFE - SEMI - BURST3

  • SAFE - SEMI ONLY

    SAFE - SEMI ONLY

The ICFU System (Integrated Custom Firestop Upgrade) is a device which allows to stop firing when there is no BB left in the magazine. The ICFU system can be fitted on a M4, 416 or Scar-L airsoft gun equipped with a fusion engine or drop-in HPA System type and requires specific 120 rounds magazines (originally PTS but modified).

ATTENTION: Classic M4 AEG magazines will no longer be compatible when ICFU system is fitted.

VIDEO ICFU



Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • ICFU Conversion service for HPA

    This package includes the working fees of ICFU onto M4 - 416 - SCAR-L replica

    What is ICFU System ?

    The ICFU System (Integrated Custom Firestop Upgrade) is a device which allows to stop firing when there is no BB left in the magazine. The ICFU system can be fitted on a M4, 416 or Scar-L airsoft gun and requires specific M4 120 rounds magazines that can be tuned to 30 rounds (originally PTS but modified).

    Compatibility :  Fusion Engine / F2 / F1 / Inferno premium

    Important: This is not an ITEM but a workshop SERVICE, it cannot be purchased alone on a simple order, please contact us first before sending your airsoft gun, many thanks !

    60,00 €
    ICFU Conversion service for HPA

    60,00 €

Choose magazine quantity for your ICFU replica, Standard M4 AEG magazine are not compatible with ICFU system

Qiantité totale 0

Vous pouvez ajouter un maximum de 999 quantités

  • P6 120 rds ICFU magazine 120 rds - Black

    This Magazine is only compatible with I.C.F.U. technology for HPA drop-in Systems. The ICFU EPM is a truly unique magazine, inside and out. Externally it features a polymer shell, with recessed panels for better grip, and unique magazine well guides that reduces nagging when the magazine is drawn from and reinserted into pouches. The front of the baseplate features a dot matrix which allows the user to mark the magazine with alphanumeric characters or pictograms for identification.

    • Material – Dupont™ Zytel® High Performance Reinforced Polymer
    • Dimension – 185 x 85 x 30 approx. (without packaging)
    • weight – 185g approx. (without packaging)
    • Compatibility – I.C.F.U. technology for HPA drop-in Systems.
    • Capacity – 30/120 Rounds

    What is ICFU System ?

    The ICFU System (Integrated Custom Firestop Upgrade) is a device which allows to stop firing when there is no BB left in the magazine. We can set ICFU on HPA and high performance AEGs M4, 416 or Scar-L airsoft gun.

    More info here : https://www.powair6.com/en/469-icfu

    29,08 €
    P6 120 rds ICFU magazine 120 rds - Black

    29,08 €
  • P6 120 rds ICFU magazine 120 rds - Dark Earth

    This Magazine is only compatible with I.C.F.U. technology for HPA drop-in Systems. The ICFU EPM is a truly unique magazine, inside and out. Externally it features a polymer shell, with recessed panels for better grip, and unique magazine well guides that reduces nagging when the magazine is drawn from and reinserted into pouches. The front of the baseplate features a dot matrix which allows the user to mark the magazine with alphanumeric characters or pictograms for identification.

    • Material – Dupont™ Zytel® High Performance Reinforced Polymer
    • Dimension – 185 x 85 x 30 approx. (without packaging)
    • weight – 185g approx. (without packaging)
    • Compatibility – I.C.F.U. technology for HPA drop-in Systems.
    • Capacity – 30/120 Rounds

    What is ICFU System ?

    The ICFU System (Integrated Custom Firestop Upgrade) is a device which allows to stop firing when there is no BB left in the magazine. We can set ICFU on HPA and high performance AEGs M4, 416 or Scar-L airsoft gun.

    More info here : https://www.powair6.com/en/469-icfu

    29,08 €
    P6 120 rds ICFU magazine 120 rds - Dark Earth

    29,08 €

Thanks to this Bluetooth FCU you can manage settings directly with your ANDROID smartphone. Please note this option is a direct replacement of the standard FCU. You will receive the HPA system with Blutooth FCU and the original FCU won't be delievered. Price include a discount for this standard exchange

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • T238 Bluetooth FCU for Polarstar HPA Engine

    • Bluetooth FCU for HPA engine
    • Compatibility : Polarstar F2, JACK, F1, Fusion engine
    • Auto-load function for gel ball blaster magazines
    • Android APP
    • Support 5~12.6V input voltage

    Functions:

    • Engine Type: This value is very important as it tells the control unit how many solenoids are used in the HPA system
    • CB Mode: Allows you to select the firing sequence with double solenoid setup : Open Bolt or closed Bolt
    • RAMP Mode : RAMP feature comes from paintball and let you to fire slow on SEMI mode. When firing speed increase and reach a preset threshold, the rifle will start firing on FULL AUTO mode while cadence remain the same: if it decrease, rifle will return on SEMI mode. (When enable RAMPMode, full-auto switch will be disabled)
    • Sniper Delay: When enable Sniper Delay, full-auto switch will be disabled, and the engine will only work in semi-auto mode, after each shot, the FCU will let you wait a period of time, and the length is determined by the set value
    • Magazine capacity limit: This function, if enabled, will cause the control unit to stop working once it reaches the set number of strokes and to resume, wait 2 seconds. This allows you to simulate mid / low cap magazines even if magazines with higher capacities are mounted underneath, moreover if set the real capacity of the assembled magazines you will avoid shooting empty.
    • Auto-load: When detect a connection of a gel ball magazine, the FCU will power the magazine for a period of time, and the length is determined by the set value
    • Friction Timer and Friction Value: Although often unnecessary with a well set replica, it may sometimes be necessary to set a higher poppet dwell value to overcome static friction. Static friction is a physical phenomenon that causes the first bullet to be fired after a period of inactivity and comes out with lower powers. If you notice that after a few minutes of inactivity the first bullet finds it difficult to be fired, or comes out weaker, it could be the fault of the static friction. Chose after how much seconds from last shoot (Friction Timer) your Friction Value will be summed to your Poppet Dwell (just the first shot). Put both these value to 0 to deactivate this function.
    • SEMI and AUTO: On some parameters you can read the words SEMI or AUTO before, this has be done to have different parameters value depending on your Fire Selector Position. When your gun is on Semi, FCU will use the Semi parameters otherwise, if in Auto position, will use the other.
    • Poppet Dwell: These are among the most important, and indicates how many tenths of a millisecond the solenoid will remain activated. We suggest to never set a value less than 30 to avoid missed shots or other problems.
    • Nozzle Dwell: Another fundamental value is Nozzle Dwell. Expressed in milliseconds, it indicates the time required to load the bullet into thehop-up chamber. It is used only on 2-solenoid systems. Its value depends very much on the BB Magazines used. We suggest never to go below 8 to avoid the risk of jamming or other BB loading problems.
    • Poppet Delay: It is a wait value expressed in milliseconds, a low value is useful for having higher ROF or reactivity, but often at the expense of precision. It should never be set to 0 nor too low. If the replica fails,increase this value. We suggest to never set a value less than 4.
    • Nozzle Delay: It is a wait value expressed in milliseconds, a low value is useful for having higher ROF or reactivity, but often at the expense of precision. It should never be set to 0 nor too low. If the replica fails, increase this value. It is advisable not to drop below 4

    Connection details :

    • 1 = Common positive +5V
    • 2 = Trigger switch: closing this contact to +5v positive will fire the BB
    • 3 = Full Auto Switch: closing this contact to +5v positive will activate the Auto Mode
    • 4 = Poppet Power Supply: this contact and +5V common positive will power on the Poppet Solenoid
    • 5 = Nozzle Power Supply: this contact and +5V common positive will power on the Nozzle Solenoid
    • 6 = It's a trigger driven negative Voltage
    • 7 = It's a direct battery positive Voltage
    • 8 = It's a trigger driven negative Voltage with auto-load function for gel ball blaster magazine
    • Connector allowed are JST ZH 5Pin and JST ZH 3Pin.

    *** Attention ***

    The extra cables provided are not necessary for the operation of a Polarstar system. You just have to plug in your Polarstar wire to make it work. Any extra wiring modification giving polarity inversions that will permanently damage the FCU will not be covered under warranty.

    58,28 €
    T238 Bluetooth FCU for Polarstar HPA Engine

    58,28 €

This part will be assembled and tested

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 50 Degree for AEG

    7,42 €
  • Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 60 Degree for AEG

    7,42 €
  • Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 70 Degree for AEG

    7,42 €
  • Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    Hop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.

    The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The "concave" shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.

    7,42 €
    Maple Leaf Macaron Hop Up Rubber 75 Degree for AEG

    7,42 €
  • Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 50 Degree (green)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 50 Degree

    8,25 €
  • Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 60 Degree (yellow)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 60 Degree

    8,25 €
  • Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 70 Degree (blue)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 70 Degree

    8,25 €
  • Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    Maple Leaf l MR "Maximum Range" rubber is designed to improve the performance and the range of your airsoft replica.

    • For AEG airsoft barrel
    • Larger & wider contact patch for better hop effect with heavy BB's
    • The design in the shape like a "shield" ensures better support of the hop up with the support levers
    • The shield-shaped groove design has a better jump effect when the tensioner / lever presses it

    Product include 1X Maple Leaf MR Hop Up Rubber for AEG - 75 Degree (pink)

    8,25 €
    Maple Leaf MR Hop Up Rubber for AEG - 75 Degree

    8,25 €
  • Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    If your hop-up adjustment is not having a big effect on the hop-up of your BBs, then it probably means that your hop-up packing is worn down and is not gripping the BB properly before it is fired out. A new hop-up packing will allow more accurate hop-up adjustments. Tested and approved by RedWolf. Best used on guns that shoot below 400fps.

    10,75 €
    Prometheus Air Seal Chamber Hop-Up Packing (Soft Type)

    10,75 €
  • Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.25 BBs or more

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    12,42 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Hard Type

    12,42 €
  • Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    The Modify BATON RYUSOKU Flat Hop Up Bucking is designed for stabilizing the hop when using 0.2 BBs

    • Friendly use
    • Efficiently improves the accuracy.
    • Stabilize and extend the trajectory
    11,58 €
    Modify Flat Hop Up Bucking baton RYUSOKU - Soft Type

    11,58 €
  • Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    Maple Leaf Super Macaron is aspecial developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)

    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 50 Degree for AEG

    8,25 €
  • Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 60 Degree for AEG

    8,25 €
  • Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG

    8,25 €
  • Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems.  While AEG buckings typically require "windowed" or "bridged" barrels, the Maple Leaf Super Macaron series slide onto "open cut/bridgeless" barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers.  The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!


    This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.

    • Optimal inner and outer Sealing
    • Accuracy and Range Improvement
    • Easy to install
    • Fits AEG Bridged Barrels
    • Fits GBB / VSR Unbridged Barrel

    Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.

    The degrees of the buckings

    The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:

    Degree and color  /  Recommended power range :
    • 50 : Less than 110 m/s (1.2 J)
    • 60 : 90-120 m/s (0.8-1.5 J)
    • 70 : 110-140 m/s (1.2-2 J)
    • 75 : 130-150 m/s (1.7-2.25 J)
    • 80 : over 150 m/s (2.25 J)
    The compatibility of the bucking

    The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.

    8,25 €
    Maple Leaf Super Macaron Hop Up Rubber 75 Degree for AEG

    8,25 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • T238 speed Tunable Trigger Archer for M4 AEG - Black

    • CNC aluminum alloy material, anodized surface
    • With multiple adjustment points, you can adjust pre-travel and over-travel of the trigger
    • Independent steel shaft, more wear-resistant and smoother
    • Suitable for V2 M4 gearbox AEG / HPA USE
    19,92 €
    T238 speed Tunable Trigger Archer for M4 AEG - Black

    19,92 €
  • T238 speed Tunable Trigger Archer for M4 AEG - Orange

    • CNC aluminum alloy material, anodized surface
    • With multiple adjustment points, you can adjust pre-travel and over-travel of the trigger
    • Independent steel shaft, more wear-resistant and smoother
    • Suitable for V2 M4 gearbox AEG / HPA USE
    19,92 €
    T238 speed Tunable Trigger Archer for M4 AEG - Orange

    19,92 €
  • T238 speed Tunable Trigger Archer for M4 AEG - Red

    • CNC aluminum alloy material, anodized surface
    • With multiple adjustment points, you can adjust pre-travel and over-travel of the trigger
    • Independent steel shaft, more wear-resistant and smoother
    • Suitable for V2 M4 gearbox AEG / HPA USE
    19,92 €
    T238 speed Tunable Trigger Archer for M4 AEG - Red

    19,92 €
  • T238 speed Tunable Trigger Blade for M4 AEG - Black

    • CNC aluminum alloy material, anodized surface
    • With multiple adjustment points, you can adjust pre-travel and over-travel of the trigger
    • Independent steel shaft, more wear-resistant and smoother
    • Suitable for V2 M4 gearbox AEG / HPA USE
    13,25 €
    T238 speed Tunable Trigger Blade for M4 AEG - Black

    13,25 €
  • T238 speed Tunable Trigger Blade for M4 AEG - Silver

    • CNC aluminum alloy material, anodized surface
    • With multiple adjustment points, you can adjust pre-travel and over-travel of the trigger
    • Independent steel shaft, more wear-resistant and smoother
    • Suitable for V2 M4 gearbox AEG / HPA USE
    13,25 €
    T238 speed Tunable Trigger Blade for M4 AEG - Silver

    13,25 €
  • T238 speed Tunable Trigger Blade for M4 AEG - Red

    • CNC aluminum alloy material, anodized surface
    • With multiple adjustment points, you can adjust pre-travel and over-travel of the trigger
    • Independent steel shaft, more wear-resistant and smoother
    • Suitable for V2 M4 gearbox AEG / HPA USE
    13,25 €
    T238 speed Tunable Trigger Blade for M4 AEG - Red

    13,25 €
  • Maxx Model CNC Advanced Speed Trigger Style A

    CNC Aluminum Advanced Speed Trigger is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles. The Advanced Speed Trigger has multiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards. The Advanced Speed Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.

    The Advanced Speed Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems. The main pivot pin of the trigger is made from Titanium for maximum strength and durability. The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum. The Aluminum and Titanium construction makes this trigger very light and durable. Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip. With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

     Includes
    product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
    product_right_arrow.png2 x Setscrew
    product_right_arrow.png3 x Rubber Pad
    product_right_arrow.png1 x Titanium Pivot Pin
    product_right_arrow.png1 x Steel Trigger Spring

     

     Specification
    product_right_arrow.pngOverall Length: 47.75mm
    product_right_arrow.pngOverall Width: 7mm
    product_right_arrow.pngPivot Pin Diameter: 3mm
    product_right_arrow.pngMaterial: Titanium /Aluminum 6061

     

     Features
    product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
    product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
    product_right_arrow.pngMultiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards
    product_right_arrow.pngCompatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
    product_right_arrow.pngDesigned with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
    product_right_arrow.pngTitanium Pivot Pin for maximum strength and durability
    product_right_arrow.pngAluminum and Titanium construction, very light and durable
    product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
    product_right_arrow.pngUnique shapes, stylish design and colors

     

     Usage
    product_right_arrow.pngUsed for Ver. 2 gear box AEG/HPA (M4, M16,...)

     

     Requires
    product_right_arrow.pngWearing eye protection is recommended
    product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
    product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

     

     Instruction
    product_right_arrow.pngInstruction Manuals are included
    24,16 €
    Maxx Model CNC Advanced Speed Trigger Style A

    24,16 €
  • Maxx Model CNC Advanced Speed Trigger Style B

    CNC Aluminum Advanced Speed Trigger is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles. The Advanced Speed Trigger has multiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards. The Advanced Speed Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.

    The Advanced Speed Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems. The main pivot pin of the trigger is made from Titanium for maximum strength and durability. The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum. The Aluminum and Titanium construction makes this trigger very light and durable. Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip. With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

     Includes
    product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
    product_right_arrow.png2 x Setscrew
    product_right_arrow.png3 x Rubber Pad
    product_right_arrow.png1 x Titanium Pivot Pin
    product_right_arrow.png1 x Steel Trigger Spring

     

     Specification
    product_right_arrow.pngOverall Length: 47.75mm
    product_right_arrow.pngOverall Width: 7mm
    product_right_arrow.pngPivot Pin Diameter: 3mm
    product_right_arrow.pngMaterial: Titanium /Aluminum 6061

     

     Features
    product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
    product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
    product_right_arrow.pngMultiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards
    product_right_arrow.pngCompatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
    product_right_arrow.pngDesigned with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
    product_right_arrow.pngTitanium Pivot Pin for maximum strength and durability
    product_right_arrow.pngAluminum and Titanium construction, very light and durable
    product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
    product_right_arrow.pngUnique shapes, stylish design and colors

     

     Usage
    product_right_arrow.pngUsed for Ver. 2 gear box AEG/HPA (M4, M16,...)

     

     Requires
    product_right_arrow.pngWearing eye protection is recommended
    product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
    product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

     

     Instruction
    product_right_arrow.pngInstruction Manuals are included
    24,16 €
    Maxx Model CNC Advanced Speed Trigger Style B

    24,16 €
  • Maxx Model CNC Advanced Speed Trigger Style C

    CNC Aluminum Advanced Speed Trigger is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles. The Advanced Speed Trigger has multiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards. The Advanced Speed Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.

    The Advanced Speed Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems. The main pivot pin of the trigger is made from Titanium for maximum strength and durability. The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum. The Aluminum and Titanium construction makes this trigger very light and durable. Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip. With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

     Includes
    product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
    product_right_arrow.png2 x Setscrew
    product_right_arrow.png3 x Rubber Pad
    product_right_arrow.png1 x Titanium Pivot Pin
    product_right_arrow.png1 x Steel Trigger Spring

     

     Specification
    product_right_arrow.pngOverall Length: 47.75mm
    product_right_arrow.pngOverall Width: 7mm
    product_right_arrow.pngPivot Pin Diameter: 3mm
    product_right_arrow.pngMaterial: Titanium /Aluminum 6061

     

     Features
    product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
    product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
    product_right_arrow.pngMultiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards
    product_right_arrow.pngCompatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
    product_right_arrow.pngDesigned with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
    product_right_arrow.pngTitanium Pivot Pin for maximum strength and durability
    product_right_arrow.pngAluminum and Titanium construction, very light and durable
    product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
    product_right_arrow.pngUnique shapes, stylish design and colors

     

     Usage
    product_right_arrow.pngUsed for Ver. 2 gear box AEG/HPA (M4, M16,...)

     

     Requires
    product_right_arrow.pngWearing eye protection is recommended
    product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
    product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

     

     Instruction
    product_right_arrow.pngInstruction Manuals are included
    24,16 €
    Maxx Model CNC Advanced Speed Trigger Style C

    24,16 €
  • Maxx Model CNC Advanced Speed Trigger Style D

    CNC Aluminum Advanced Speed Trigger is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles. The Advanced Speed Trigger has multiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards. The Advanced Speed Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.

    The Advanced Speed Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems. The main pivot pin of the trigger is made from Titanium for maximum strength and durability. The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum. The Aluminum and Titanium construction makes this trigger very light and durable. Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip. With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

     Includes
    product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
    product_right_arrow.png2 x Setscrew
    product_right_arrow.png3 x Rubber Pad
    product_right_arrow.png1 x Titanium Pivot Pin
    product_right_arrow.png1 x Steel Trigger Spring

     

     Specification
    product_right_arrow.pngOverall Length: 47.75mm
    product_right_arrow.pngOverall Width: 7mm
    product_right_arrow.pngPivot Pin Diameter: 3mm
    product_right_arrow.pngMaterial: Titanium /Aluminum 6061

     

     Features
    product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
    product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
    product_right_arrow.pngMultiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards
    product_right_arrow.pngCompatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
    product_right_arrow.pngDesigned with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
    product_right_arrow.pngTitanium Pivot Pin for maximum strength and durability
    product_right_arrow.pngAluminum and Titanium construction, very light and durable
    product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
    product_right_arrow.pngUnique shapes, stylish design and colors

     

     Usage
    product_right_arrow.pngUsed for Ver. 2 gear box AEG/HPA (M4, M16,...)

     

     Requires
    product_right_arrow.pngWearing eye protection is recommended
    product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
    product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

     

     Instruction
    product_right_arrow.pngInstruction Manuals are included
    24,16 €
    Maxx Model CNC Advanced Speed Trigger Style D

    24,16 €
  • Maxx Model CNC Advanced Speed Trigger Style E

    CNC Aluminum Advanced Speed Trigger is specially designed for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles. The Advanced Speed Trigger has multiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards. The Advanced Speed Trigger is completely compatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box.

    The Advanced Speed Trigger is designed with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems. The main pivot pin of the trigger is made from Titanium for maximum strength and durability. The body of the trigger is CNC machined out of a solid block of Aircraft Grade Aluminum. The Aluminum and Titanium construction makes this trigger very light and durable. Moreover, the trigger is carefully chamfered the edges and securely fitted with three rubber pads to ensure comfort, enhance traction and secure grip. With the unique shapes, stylish design and colors, we will have an option to fit your style needs.

     Includes
    product_right_arrow.png1 x CNC Aluminum Advanced Speed Trigger
    product_right_arrow.png2 x Setscrew
    product_right_arrow.png3 x Rubber Pad
    product_right_arrow.png1 x Titanium Pivot Pin
    product_right_arrow.png1 x Steel Trigger Spring

     

     Specification
    product_right_arrow.pngOverall Length: 47.75mm
    product_right_arrow.pngOverall Width: 7mm
    product_right_arrow.pngPivot Pin Diameter: 3mm
    product_right_arrow.pngMaterial: Titanium /Aluminum 6061

     

     Features
    product_right_arrow.pngMachined from a solid block of Aircraft Grade Aluminum with tight tolerances to provide better accuracy, consistency, and durability
    product_right_arrow.pngDesigned for fast response, smooth and consistent trigger pull on Ver. 2 Gear Box of M4/M16 series Airsoft AEG Rifles
    product_right_arrow.pngMultiple adjustment points to control pre-travel and over-travel to shorten trigger pull and prevent damage to electronic switches on controller boards
    product_right_arrow.pngCompatible with the popular TITAN™ Electronic Module from Gate for Ver. 2 Gear Box
    product_right_arrow.pngDesigned with relieve cuts to function in most Tokyo Marui (TM) spec. AEG and HPA systems
    product_right_arrow.pngTitanium Pivot Pin for maximum strength and durability
    product_right_arrow.pngAluminum and Titanium construction, very light and durable
    product_right_arrow.pngChamfered the edges and fitted with three rubber pads to ensure comfort, enhance traction and secure grip
    product_right_arrow.pngUnique shapes, stylish design and colors

     

     Usage
    product_right_arrow.pngUsed for Ver. 2 gear box AEG/HPA (M4, M16,...)

     

     Requires
    product_right_arrow.pngWearing eye protection is recommended
    product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
    product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

     

     Instruction
    product_right_arrow.pngInstruction Manuals are included
    24,16 €
    Maxx Model CNC Advanced Speed Trigger Style E

    24,16 €
  • Gate 2B1 NOVA Trigger V2 M4

    • TITAN V2 Compatible
    • AEG V2 TM spec compatible
    • HPA V2 Tm spec compatible

    An adjustable speed trigger designed especially for pros using TITAN V2 for the greatest accuracy and overcoming limits. Enjoy simple and precise hair-trigger adjustment on any sensor you want. Shoot faster thanks to over-travel control. Make the most of the compatibility with any gearbox wherever standard V2 trigger fits, including HPA. Select from multiple shapes and colors to suit the style and type of your games. All of this with ultra-high quality of 7075 aircraft grade aluminum CNC machining.

    Features:

    • Designed especially for TITAN V2
    • Pre-travel screw - hair-trigger adjustment
    • Over-travel screw - limit trigger movement from outside the rifle body and shoot faster
    • Long-Lok system against loose screws
    • Full compatibility with TITAN V2 allowing the use of all 5 sensors
    • Full compatibility with HPA engines and standard V2 trigger contacts
    • Multiple shapes and colors to suit the style and type of your games
    • Ultra-high quality of aircraft-grade aluminum CNC machining
    • No modification of AEG required
    • Compatibility with ASTER V2 as a standard trigger*
    • Dedicated especially to pros and skilled users

    Compatibility:

    • All standard V2 gearboxes like Tokyo Marui
    • TITAN V2
    • Standard trigger contacts like Tokyo Marui
    • HPA engines

    Love the TITAN hair-trigger, but need exact adjustments? Thanks to the pre-travel and over-travel screws, you can exactly set the point where the trigger starts its movement and how far you can pull it.

    Enter the world of full control. Use the first trigger ever especially designed for the TITAN V2 ETU. Make no compromises and utilize full trigger range from the very first sensor. Need hair-trigger in exact position? Thanks to the adjustment points you can set the movement e.g. on the third sensor and the movement range to just two millimeters. The Nova Trigger makes adjustments easy and precise. No need for changes in ETU position or grinding the body of your replica. Just install the trigger, set the limits of the travel or even hair-trigger, and you are ready.

    We know that style is important. You’re no longer limited to the few shapes of adjustable triggers on the market. Enjoy the full range of designs and colors, both classic and futuristic.

    Need a new high-end trigger for your HPA build or standard trigger contacts? Nova is the answer. Enjoy the ultra-high quality of CNC aluminum machining and 7 different colors to fit your replica.

    24,92 €
    Gate 2B1 NOVA Trigger V2 M4

    24,92 €
  • Gate 2C1 NOVA Trigger V2 M4

    • TITAN V2 Compatible
    • AEG V2 TM spec compatible
    • HPA V2 Tm spec compatible

    An adjustable speed trigger designed especially for pros using TITAN V2 for the greatest accuracy and overcoming limits. Enjoy simple and precise hair-trigger adjustment on any sensor you want. Shoot faster thanks to over-travel control. Make the most of the compatibility with any gearbox wherever standard V2 trigger fits, including HPA. Select from multiple shapes and colors to suit the style and type of your games. All of this with ultra-high quality of 7075 aircraft grade aluminum CNC machining.

    Features:

    • Designed especially for TITAN V2
    • Pre-travel screw - hair-trigger adjustment
    • Over-travel screw - limit trigger movement from outside the rifle body and shoot faster
    • Long-Lok system against loose screws
    • Full compatibility with TITAN V2 allowing the use of all 5 sensors
    • Full compatibility with HPA engines and standard V2 trigger contacts
    • Multiple shapes and colors to suit the style and type of your games
    • Ultra-high quality of aircraft-grade aluminum CNC machining
    • No modification of AEG required
    • Compatibility with ASTER V2 as a standard trigger*
    • Dedicated especially to pros and skilled users

    Compatibility:

    • All standard V2 gearboxes like Tokyo Marui
    • TITAN V2
    • Standard trigger contacts like Tokyo Marui
    • HPA engines

    Love the TITAN hair-trigger, but need exact adjustments? Thanks to the pre-travel and over-travel screws, you can exactly set the point where the trigger starts its movement and how far you can pull it.

    Enter the world of full control. Use the first trigger ever especially designed for the TITAN V2 ETU. Make no compromises and utilize full trigger range from the very first sensor. Need hair-trigger in exact position? Thanks to the adjustment points you can set the movement e.g. on the third sensor and the movement range to just two millimeters. The Nova Trigger makes adjustments easy and precise. No need for changes in ETU position or grinding the body of your replica. Just install the trigger, set the limits of the travel or even hair-trigger, and you are ready.

    We know that style is important. You’re no longer limited to the few shapes of adjustable triggers on the market. Enjoy the full range of designs and colors, both classic and futuristic.

    Need a new high-end trigger for your HPA build or standard trigger contacts? Nova is the answer. Enjoy the ultra-high quality of CNC aluminum machining and 7 different colors to fit your replica.

    24,92 €
    Gate 2C1 NOVA Trigger V2 M4

    24,92 €
  • Gate 2E1 NOVA Trigger V2 M4

    • TITAN V2 Compatible
    • AEG V2 TM spec compatible
    • HPA V2 Tm spec compatible

    An adjustable speed trigger designed especially for pros using TITAN V2 for the greatest accuracy and overcoming limits. Enjoy simple and precise hair-trigger adjustment on any sensor you want. Shoot faster thanks to over-travel control. Make the most of the compatibility with any gearbox wherever standard V2 trigger fits, including HPA. Select from multiple shapes and colors to suit the style and type of your games. All of this with ultra-high quality of 7075 aircraft grade aluminum CNC machining.

    Features:

    • Designed especially for TITAN V2
    • Pre-travel screw - hair-trigger adjustment
    • Over-travel screw - limit trigger movement from outside the rifle body and shoot faster
    • Long-Lok system against loose screws
    • Full compatibility with TITAN V2 allowing the use of all 5 sensors
    • Full compatibility with HPA engines and standard V2 trigger contacts
    • Multiple shapes and colors to suit the style and type of your games
    • Ultra-high quality of aircraft-grade aluminum CNC machining
    • No modification of AEG required
    • Dedicated especially to pros and skilled users

    Compatibility:

    • All standard V2 gearboxes like Tokyo Marui
    • TITAN V2
    • Standard trigger contacts like Tokyo Marui
    • HPA engines

    Love the TITAN hair-trigger, but need exact adjustments? Thanks to the pre-travel and over-travel screws, you can exactly set the point where the trigger starts its movement and how far you can pull it.

    Enter the world of full control. Use the first trigger ever especially designed for the TITAN V2 ETU. Make no compromises and utilize full trigger range from the very first sensor. Need hair-trigger in exact position? Thanks to the adjustment points you can set the movement e.g. on the third sensor and the movement range to just two millimeters. The Nova Trigger makes adjustments easy and precise. No need for changes in ETU position or grinding the body of your replica. Just install the trigger, set the limits of the travel or even hair-trigger, and you are ready.

    We know that style is important. You’re no longer limited to the few shapes of adjustable triggers on the market. Enjoy the full range of designs and colors, both classic and futuristic.

    Need a new high-end trigger for your HPA build or standard trigger contacts? Nova is the answer. Enjoy the ultra-high quality of CNC aluminum machining and 7 different colors to fit your replica.

    24,92 €
    Gate 2E1 NOVA Trigger V2 M4

    24,92 €
  • Gate Quantum Trigger 1B1 for ASTER

    When hair trigger starts to be boring, it means you are ready for the next level. With Quantum Trigger and ASTER V2, you can set sensitivity from ludicrous ‘touch’ through ‘hair’ to full movement. Using the Quantum Trigger, you benefit from a totally new way of trigger detection. Instead of covering, the trigger precisely reflects the light. Shape and surface of the QT is unique and dedicated to work with ASTER V2 sensor. This CNC Quantum Trigger is like a diamond among coal rocks. Dare to try it. All these features give that extreme resolution.

    Features:

    • Ultra-high resolution – even 60 trigger sensitivities for the 1st mm (0.04 in) of movement
    • Even 470 possible sensitivity levels for whole movement
    • Designed to work with ASTER V2 optical sensors
    • Dedicated especially for pros and skilled users
    • Made from aluminium by CNC

    Compatible only with ASTER V2.

    Notice: Quantum Trigger requires at least GCS 3.0 beta 5 (Windows/macOS) or GCS 1.5.6 (Android devices) and ASTER firmware version 3.1-03 or later.

    22,42 €
    Gate Quantum Trigger 1B1 for ASTER

    22,42 €
  • Gate Quantum Trigger 1C1 for ASTER

    When hair trigger starts to be boring, it means you are ready for the next level. With Quantum Trigger and ASTER V2, you can set sensitivity from ludicrous ‘touch’ through ‘hair’ to full movement. Using the Quantum Trigger, you benefit from a totally new way of trigger detection. Instead of covering, the trigger precisely reflects the light. Shape and surface of the QT is unique and dedicated to work with ASTER V2 sensor. This CNC Quantum Trigger is like a diamond among coal rocks. Dare to try it. All these features give that extreme resolution.

    Features:

    • Ultra-high resolution – even 60 trigger sensitivities for the 1st mm (0.04 in) of movement
    • Even 470 possible sensitivity levels for whole movement
    • Designed to work with ASTER V2 optical sensors
    • Dedicated especially for pros and skilled users
    • Made from aluminium by CNC

    Compatible only with ASTER V2.

    Notice: Quantum Trigger requires at least GCS 3.0 beta 5 (Windows/macOS) or GCS 1.5.6 (Android devices) and ASTER firmware version 3.1-03 or later.

    22,42 €
    Gate Quantum Trigger 1C1 for ASTER

    22,42 €
  • Gate Quantum Trigger 1E1 for ASTER

    When hair trigger starts to be boring, it means you are ready for the next level. With Quantum Trigger and ASTER V2, you can set sensitivity from ludicrous ‘touch’ through ‘hair’ to full movement. Using the Quantum Trigger, you benefit from a totally new way of trigger detection. Instead of covering, the trigger precisely reflects the light. Shape and surface of the QT is unique and dedicated to work with ASTER V2 sensor. This CNC Quantum Trigger is like a diamond among coal rocks. Dare to try it. All these features give that extreme resolution.

    Features:

    • Ultra-high resolution – even 60 trigger sensitivities for the 1st mm (0.04 in) of movement
    • Even 470 possible sensitivity levels for whole movement
    • Designed to work with ASTER V2 optical sensors
    • Dedicated especially for pros and skilled users
    • Made from aluminium by CNC

    Compatible only with ASTER V2.

    Notice: Quantum Trigger requires at least GCS 3.0 beta 5 (Windows/macOS) or GCS 1.5.6 (Android devices) and ASTER firmware version 3.1-03 or later.

    22,42 €
    Gate Quantum Trigger 1E1 for ASTER

    22,42 €

This part will be assembled and tested

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • Maxx Model CNC Hopup Chamber M4A PRO for M4 AEG

    CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series. The Hopup Chamber M4A unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.

    The Hopup Chamber M4A unit is designed to accept 21.00mm to 21.25mm nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber M4A unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)
    Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

    More than that, the Hopup Chamber M4A Pro unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.

    ***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
    ***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

     

     Includes
    product_right_arrow.png1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit
    product_right_arrow.png2 x CNC Acrylic Side Cover
    product_right_arrow.png2 x CNC Brass 2.5mm Side Wing
    product_right_arrow.png1 x CNC Steel Pivot Pin
    product_right_arrow.png1 x CNC Aluminum Hopup Lever
    product_right_arrow.png1 x CNC Aluminum Soft Round Nub
    product_right_arrow.png1 x CNC Aluminum Soft Flat Nub (4mm)
    product_right_arrow.png1 x CNC Aluminum Hard Concave Nub (4mm)
    product_right_arrow.png3 x Steel Nub Spring
    product_right_arrow.png1 x CNC Steel Spring Guide
    product_right_arrow.png1 x Steel Upper Compression Spring
    product_right_arrow.png1 x Steel Center Compression Spring
    product_right_arrow.png1 x CNC Delrin Locking C-Clip
    product_right_arrow.png1 x CNC Brass Barrel Spacer
    product_right_arrow.png1 x Brass Barrel Spacer Holder Oring
    product_right_arrow.png1 x CNC Aluminum Rotary Dial Knob
    product_right_arrow.png1 x CNC Aluminum Inlet Adaptor (OD11mm)
    product_right_arrow.png1 x CNC Brass Inlet Spacer

     

     Specification
    product_right_arrow.pngOverall Length: 51.65mm
    product_right_arrow.pngOverall Height: 37.75mm
    product_right_arrow.pngInlet Adaptor Outer Diameter (to fit into Gear Box): 11mm
    product_right_arrow.pngHub Outer Diameter (to fit into Outer Barrel): 12mm
    product_right_arrow.pngHub Inner Diameter (to fit Nozzle): 8mm
    product_right_arrow.pngFeeder Outer Diameter (to fit magazine): 8.85mm
    product_right_arrow.pngFeeder Length (to fit magazine): 6mm
    product_right_arrow.pngMaterial: Aluminum 6061

     

     Features
    product_right_arrow.pngMachined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
    product_right_arrow.pngPerformed accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series
    product_right_arrow.pngPrecision Rotary Dial Knob for fine hopup adjustments
    product_right_arrow.pngRe-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
    product_right_arrow.pngRemovable Steel Pivot Pin for ease of setup and maintenance
    product_right_arrow.pngAccepted 21.00mm to 21.25mm nozzle length
    product_right_arrow.pngFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
    product_right_arrow.pngWisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)
    product_right_arrow.pngMounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
    product_right_arrow.pngIncluded an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
    product_right_arrow.pngEquipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use
    product_right_arrow.pngSpecially designed with a new BB Latching System to prevent BB dropping after removing the magazine
    product_right_arrow.pngThe Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber
    product_right_arrow.pngCompatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outlets
    product_right_arrow.pngThe Dual UV LED Tracer Module to glow BB in the dark ready!

     

     Weight
    product_right_arrow.pngN/A grams

     

     Usage
    product_right_arrow.pngCompatible with most Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series

     

     Requires
    product_right_arrow.pngWearing eye protection is recommended
    product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
    product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

     

     Instruction
    product_right_arrow.pngInstruction Manuals are included
    52,44 €

    Remises par quantités

    QuantityPrixÉconomie
    1 36,71 € au moins 15,73 €
    Maxx Model CNC Hopup Chamber M4A PRO for M4 AEG

    52,44 €
  • Maxx Model CNC Hopup Chamber M4P PRO for Polarstar M4 HPA

    CNC Aluminum Hopup Chamber M4P Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently with HPA PolarStar Engines on standard M4/M16 platform. The Hopup Chamber M4P unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.
    The Hopup Chamber M4P unit is designed to accept the HPA PolarStar Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.

    The Hopup Chamber M4P unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)
    Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

    More than that, the Hopup Chamber M4P Pro unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.

    ***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
    ***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

     

     Includes
    product_right_arrow.png1 x CNC Aluminum Hopup Chamber M4P Pro (with BB Latching System) unit
    product_right_arrow.png2 x CNC Acrylic Side Cover
    product_right_arrow.png2 x CNC Brass 2.5mm Side Wing
    product_right_arrow.png1 x CNC Steel Pivot Pin
    product_right_arrow.png1 x CNC Aluminum Hopup Lever
    product_right_arrow.png1 x CNC Aluminum Soft Round Nub
    product_right_arrow.png1 x CNC Aluminum Soft Flat Nub (4mm)
    product_right_arrow.png1 x CNC Aluminum Hard Concave Nub (4mm)
    product_right_arrow.png3 x Steel Nub Spring
    product_right_arrow.png1 x CNC Steel Spring Guide
    product_right_arrow.png1 x Steel Upper Compression Spring
    product_right_arrow.png1 x Steel Center Compression Spring
    product_right_arrow.png1 x CNC Delrin Locking C-Clip
    product_right_arrow.png1 x CNC Brass Barrel Spacer
    product_right_arrow.png1 x Brass Barrel Spacer Holder Oring
    product_right_arrow.png1 x CNC Aluminum Rotary Dial Knob
    product_right_arrow.png1 x CNC Aluminum Inlet Adaptor (OD11mm)

     

     Specification
    product_right_arrow.pngOverall Length: 51.15mm
    product_right_arrow.pngOverall Height: 37.75mm
    product_right_arrow.pngInlet Adaptor Outer Diameter (to fit into HPA Nozzle Outlet): 11mm
    product_right_arrow.pngHub Outer Diameter (to fit into Outer Barrel): 12mm
    product_right_arrow.pngHub Inner Diameter (to fit Nozzle): 8mm
    product_right_arrow.pngFeeder Outer Diameter (to fit magazine): 8.85mm
    product_right_arrow.pngFeeder Length (to fit magazine): 6mm
    product_right_arrow.pngMaterial: Aluminum 6061

     

     Features
    product_right_arrow.pngMachined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
    product_right_arrow.pngPerformed accurately and consistently with HPA PolarStar Engines on standard M4/M16 platform
    product_right_arrow.pngPrecision Rotary Dial Knob for fine hopup adjustments
    product_right_arrow.pngRe-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
    product_right_arrow.pngRemovable Steel Pivot Pin for ease of setup and maintenance
    product_right_arrow.pngAccepted the HPA PolarStar Engine M4 nozzle length
    product_right_arrow.pngFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
    product_right_arrow.pngWisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)
    product_right_arrow.pngMounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
    product_right_arrow.pngIncluded an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
    product_right_arrow.pngEquipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use
    product_right_arrow.pngSpecially designed with a new BB Latching System to prevent BB dropping after removing the magazine
    product_right_arrow.pngThe Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber
    product_right_arrow.pngCompatible with any 11mm inner bore HPA Engine nozzle outlets
    product_right_arrow.pngThe Dual UV LED Tracer Module to glow BB in the dark ready!

     

     Weight
    product_right_arrow.pngN/A grams

     

     Usage
    product_right_arrow.pngCompatible with most HPA PolarStar Engines on standard M4/M16 platform

     

     Requires
    product_right_arrow.pngWearing eye protection is recommended
    product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
    product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

     

     Instruction
    product_right_arrow.pngInstruction Manuals are included

    PolarStar Airsoft is a division of PolarStar Engineering & Machine (PSE&M).

    74,92 €
    Maxx Model CNC Hopup Chamber M4P PRO for Polarstar M4 HPA

    74,92 €
  • ProWin M4 Chamber for Marui AEG

    ProWin Now offers the entire hop chamber unit for your favorite M4/M16 AEG! The ProWin Brand is known to create precision complex-shaped parts with their refined CNC manufacturing methods which sets it apart from other brands cast metal method.The CNC milled hop up is made from a solid piece of stock aircraft grade aluminum which means that the material completely consistent and eliminates the possibility of bubbles and weak areas in the metal. Anodized hard treatment in cobalt blue color adds to durability and that custom look.

    Features include:

    • Full CNC and anodized blue high grade aluminum body
    • Hop up adjustable via ring for utmost stability in comparison to the gear type
    • Retaining clips and pins all designed for quick change of worn hop packing/rubber
    • Highly durable and promotes high accuracy and lasting shooting stability
    • Significantly lighter and stronger material than the traditional cast metal type hop up units

    21,58 €
    ProWin M4 Chamber for Marui AEG

    21,58 €
  • RETROARMS CNC Hop Up Chamber AR15 UNI for M4 AEG

    30,75 €
    RETROARMS CNC Hop Up Chamber AR15 UNI for M4 AEG

    30,75 €
  • Silent Industries AEG Alpha CNC hop-up chamber

    TRUE-TDC

    To get the most consistent pressure on the bucking through the hop-up settings, we had to include TDC. This means the nub can only move in up & down motion.The TDC trolley we include is made for nubs, so you can use your desired nub.We recommend using our Black Nubs, Blue Nubs, ML Omega or similar height nubs, because our system was optimised for it.Our TDC system provides the most travel distance, meaning it can lift heavy BBs easily!

    TENSIONER RING SYSTEM

    Our Revolutionary tensioner system is very easy to assemble, it utilises Tensioner rings! In the package you get two rings, black & white (extra rings can be bought for tighter settings)

    • We recommend trying ML SuperMacaron with White Ring!
    • Black is for tighter lip tension
    • White is looser lip tension

    117930.jpg?time=1709284411616

    This is the only Hop-Up chamber on the market that fully supports the bucking lips!

    ADJUSTABLE FEED TUBE

    The Adjustable Feed Tube enables you to set length of if it, meaning you can fine tune it for your magazines! This can improve the feeding  and reduce the up/down play of the magazine in the magwell. (If you have different branded magazines, try them all before use to make an universal adjustment)

    BARREL ALIGNMENT GROOVE

    The Alpha features a groove that can help you with barrel alignment, we recommend using this as a reference point as some less quality barrels can have misaligned hop-up window! We recommend Sniper Upgrades, PDI, Lambda, ZCI stainless steel barrels! They are tried and tested by us!

    117929.jpg?time=1709284411067

    GAME CHANGER FOR HPA BUILDS

    HPA engines in general have much stronger BB loading force compared to AEGs, this sometimes can lead to issues such as double feeding, mid-cap syndrome or BB placement. Our Alpha chamber with it’s innovative bucking lip tensioner system can help with these issues as you can fine tune the loading resistance! It is a highly recommended chamber for Wolverine, PolarStar, Gate Pulsar engine builds!

    Wolverine-Airsoft-Horizontal-Black.png-s    polarstar-logo.jpg

    WHAT’S INCLUDED?

    • Hop-up chamber base
    • Adjustment Wheel
    • Feed Tube
    • Hop-up arm
    • TDC nub carriage
    • Blue Nub (Extended)
    • Stainless Steel pin for the hop-up arm
    • O-rings for the Hop-Up body (2 pcs)
    • O-rings for the barrel (8 pcs)
    • C-clip
    • Barrel Stabilizer
    • 3x Shims for Nozzle Lenght Adjustment
    • 2x Bucking Lip tensioners (Black & White)

    WHAT DO YOU NEED?

    • Hop-up bucking (G&G Green, Madbull Blue/Red, Maple Leaf Super Macaron, Prometheus Purple, Begadi buckings)
    • R-hop (Optional!)
    • Tight and Very Tight tensioner rings (optional)
    • Recommended nozzle length is standard 21.2mm (can be adjusted with the included shims!)

    BRAND COMPATIBILTY

    • Krytac
    • VFC (MCX too with minor mod)
    • G&G
    • G&P
    • Cyma
    • Specna Arms
    • Novritsch SSR4
    • Lancer Tactical
    • Double Eagle

    Does NOT fit:

    • ICS
    • Novritsch SSR9 (might fit with some mods)
    74,92 €
    Silent Industries AEG Alpha CNC hop-up chamber

    74,92 €

This part will be assembled and tested with your custom replica

Quantité totale 0

Vous ne pouvez pas ajouter plus de 1 quantité(s)

  • PDI 6.08 Precision Inner Barrel for AEG 275mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around. These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers. The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control. This barrel is 6.08, which is the same diameter as standard AEG barrels. The 6.08 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.08mm (+0.002mm tolerance)
    - Made in Japan

    49,92 €
    PDI 6.08 Precision Inner Barrel for AEG 275mm

    49,92 €
  • PDI 6.05 Precision Inner Barrel for AEG 275mm

    Airsoft may be just a game, but the engineers and machinists at PDI definitely don't play around.

    These barrels are cold-hammer forged, which is the same process that real firearm barrels undergo. This process creates a very consistent bore that gives the barrel a tolerance of +0.002mm. This tolerance is currently the highest quality in the entire Airsoft industry for accessible stainless steel barrels. Custom made or lapped stainless barrels can surpass the inner surface of PDI, but those barrels are extremely expensive and are generally not accessible to most consumers.

    The material is SUS304 Stainless Steel. This Steel is harder to cut than most barrels and has superior corrosion resistance. Additionally, PDI barrels are very well known for their straightness and quality control.

    This barrel is 6.05, which is the same diameter as standard AEG barrels. The 6.05 bore is best suited for long range engagements. Through their own research and testing, PDI has found that wider bores give better accuracy over longer distances than tighter bores.

    - Material: Cold Hammer Forged SUS304 Stainless Steel
    - 6.05mm (+0.002mm tolerance)
    - Made in Japan

    49,92 €
    PDI 6.05 Precision Inner Barrel for AEG 275mm

    49,92 €
  • ORGA LEX05 BARREL for AEG (275mm)

    Extreme precision Inner Diameter 6.05mm (±‐0) LEX inner Barrel for AEG

    if use this barrel case you can get more BB power and flat setting on your Hop System. Mostly used for upgrading AEG’s, longer range and better precision result.

    If you use "Flat HOP SYSTEM" we recommend NAMAZU HOP (Firefly) or DIMENSION (ORGA).

    44,92 €
    ORGA LEX05 BARREL for AEG (275mm)

    44,92 €
  • Lambda EVO precision Barrel for AEG - 275mm

    The lambda SUS304 stainless steel precision barrel is manufactured in the Osaka factory in Japan and they are very high quality. All the barrels are designed on CNC machines.

    • The EVO range from Lambda is between Smart and FIVE
    • The internal diameter is 6.05mm
    • The external diameter is 8.55mm
    • Large window comaptible with the installation of R-HOP
    • Suitable for AEG airsoft guns

    canon-de-precision-lambda-five-pour-aeg-

    31,58 €
    Lambda EVO precision Barrel for AEG - 275mm

    31,58 €
  • Poseidon 6.05 precision barrel Air Cushion Electroless Gen2 x 275mm

    Poseidon precision barrels are made of brass with hard electrolytic nickel surface coating. They feature the Air Cushion system technology with two notches on both sides of the barrel allowing the BBs to be guided without friction for a more efficient trajectory.

    • 1 x 6.05mm precision barrel
    • 1 x rubber
    • 1 x poseidon patch
    41,58 €
    Poseidon 6.05 precision barrel Air Cushion Electroless Gen2 x 275mm

    41,58 €
  • Prometheus EG 6.03mm precision Barrel 280mm ( New gen)

    High grade precision barrel from Prometheus at 6.03mm diameter for extra power and precision shooting.

    With a precision barrel, you can opt for higher grade precision BB's for greater accuracy.

    Special lenght 280mm is ideal for KRYTAC CRB & LMG AEG

    54,08 €
    Prometheus EG 6.03mm precision Barrel 280mm ( New gen)

    54,08 €

Save 15% on HPA tank by adding them with your custom replica !

Qiantité totale 0

Vous pouvez ajouter un maximum de 20 quantités

  • Balystik 0.8L 3000psi Alu HPA Tank with HP preset

    Balystik strikes again in the HPA universe and present a new range of high pressure cylinders. This tank is made of aluminum with steel base and will provide all the rigor expected of a reliable, efficient and safe product. The volume of this cylinder is 0,8 liters (48 ci) in with a maximum pressure of 3000psi (200 bar).

    Technical details :

    •      Tank and regulator with Pi certification
    •      Operating pressure: 200 BAR / 3000 PSI max
    •      Output pressure: 800 PSI
    •      5000 PSI mini pressure gauge
    •      Filling valve with filter and Protective cap
    •      Protective cap for ASA threaded outlet

    38,89 €
    Balystik 0.8L 3000psi Alu HPA Tank with HP preset

    45,75 € 38,89 €

Remises par quantités

arrow_drop_downRécapitulatif :

Total :

Partagez votre création avec vos amis.

More info

Powair6 si proud to introduce the Specna arms Daniel Defense® MK18 SA-C19 Core tuned in HPA. Some options are available if you want another HPA system or change some parts like hop-up rubber or trigger. The replica comes with the original 6mm macroline out of the motor grip but you have the possibility to choose our easyconnect system, in this case the male connector will be fitted directly onto the motor grip, no more visible macroline hose, just click & go.

Important note :

  • All AEG spare parts unmounted are delivered with the replica
  • Please do not modify the nozzle and airflow values ​​of the FCU, modify only firing modes.
  • We strongly advice you to use high performance mid-cap spring operated
  • Don't feed your mid cap magazine more than 80% of the maximal capacity
  • We strongly advice you to use high performance BBs such as BLS, Krytac, Madbul,ASG blaster Devil, ASG open Blaster.
  • Never use grease or any silicone on the electric gun, magazine or BBs
  • Be sure to use clean air and check that your air filter is clean if you are using HPA home compressor.
  • 12 month warranty by P6 Workshop, if the product is opened warranty is voided.

The power of the replica depends on the operating pressure that you set on the regulator, it is appropriate for each player to have a speed control system in order to verify that the energy developed by the replica does not exceed the legal limits of your country.  Please note that any modifications or machining may be necessary and that the supplied replica is no longer intended to be reconverted for AEG / Electric operation. The replica does not need any maintenance and disassembly, any opening voids the warranty.

Data sheet

TypeM4
Caliber6mm Airsoft
HPA SystemMulti selectable
Thread type14mm CCW
Hop-upAdjustable
Firing modeSelectable
Power sourceHPA
GearboxV2
Magazine VersionMid-cap Spring operated
Magazine capacity120
Power (FPS @ 0.20gr)Linked to the regulator pressure set

Customization

After saving your customized product, remember to add it to your cart.

loader

* required fields

Accessories

Airsoft gun Law

This airsoft replica is subject to the french Decree No. 99-240 of March 24, 1999, which regulates the law of replica firearms developing an output energy from the muzzle greater than 0.08 joule and equal to or less than 2 joules. This product is intended for recreational use only. By adding this product to your cart, you acknowledge:

  • Being older than 18
  • Master the basic safety rules concerning the use of this type of replica (wearing protective glasses, playing in a suitable and private place, etc.).
  • Never expose the replica in a public place because it can be mistaken for a real weapon with all the disastrous consequences that this implies
  • Being in full knowledge of the airsoft laws in your local country and buying knowingly, Powair6 cannot be responsible in the case of illegal importation.
  • Never point or shoot at a person, animal or any other object representing any danger.
  • Do not aim with your replica until you are ready to shoot at the target you have selected.
  • Do not shoot on a hard surface, risk of the ball bouncing, or in water, which could cause dangerous ricochets.
  • Do not aim the shot at the eyes or ears.
  • Do not use airsoft without wearing goggles or a protective mask.
  • Do not attempt to modify or disassemble the product in order to increase its firing power. It can be dangerous and will void the warranty.
  • Always be sure to keep the safety “ON” when you are no longer using the product.
  • Never look into the barrel, a BB may be hurt your eyes.

Questions 

Pas de question client pour le moment.

Seuls les utilisateurs enregistrés peuvent poser une question. Login